Glasgow · Scotland
Fire Rated Sealant in Anniesland
Fire-stopping gaps in Anniesland need attention? We remove the old material, prepare the joints and seal them properly.
- Damaged fire sealant left by other trades
- Door frames with gaps between frame and wall
- Linear gaps at the head of walls
Fire rated sealant in Anniesland
Until it’s heated, intumescent sealant behaves like an ordinary sealant; then it swells to help close the gap. The right product depends on the gap size, the substrate and what passes through. We work on flats & HMOs, linear gaps and service penetrations, and the jobs we see most are open joints along the top of partitions and gaps around pipes and cables through fire-resisting walls.
Scotland’s cities have offices, hotels, student flats, care homes and tenement blocks looked after by factors. In Anniesland, that can mean resealing washrooms room by room or fire-rated sealant around pipes and cables in common areas.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Location
- Anniesland (G13, G12, G14)
- Wider area
- Glasgow
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
The process
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes a few hours for a handful of gaps, and longer for a whole building, depending on the size of the job. Many homes in Scotland’s cities are tenement flats, reached through a shared close and up a common stair. For a job in Anniesland, tell us the floor, how the door entry system works and where we can park nearby.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Before we arrive
- Mention any sign-in or site rules at work premises
- Clear items away from the joints we are working on
- Let us know about parking restrictions
Ask for a quote
To get a quote, drop us a line at info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear quote before any work starts.
Related advice
Fire rated sealant in Anniesland: local notes
There are hotels and other places to stay in and around Anniesland. Hotel work can be planned room by room, with out-of-hours working where needed. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments.
If you look after a building such as Knightswood Secondary School, fire-stopping around service openings should be restored whenever new services go in. If you let a flat or house near Anniesland station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Community buildings like Jordanhill Parish Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Anniesland is about 2 miles south of Bearsden, in Glasgow. Homes, rented property, offices and hotels in Anniesland is covered for fire rated sealant. Every job comes with our one-year guarantee. Anniesland is one of 183 places in Glasgow where we work for fire rated sealant.
We work across G13, G12 and G14 for fire rated sealant. Streets in the area include Crow Road, Fern Lane and Ryvra Road, all of which we cover. Being close to the A82, Anniesland is simple for us to get to. Other places close to Anniesland include Anniesland Cross (1 mile east), Temple (1 mile north-east), Knightswood (1 mile north-west), Netherton (1 mile north) and Jordanhill (1 mile south-west). Within a short drive, we also cover Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south-east).
Local landmarks in Anniesland
Around Anniesland, our work takes us to homes and buildings near The Esquire House, Scotstoun Primary School and Victoria Park and the streets around them. There’s a railway station in Anniesland itself: Anniesland station. Nearby you’ll also find Braehead (1.6 miles south-west) and Glasgow Museum of Transport (2 miles south-east). The countryside around Anniesland includes Castle Hill and Kilmardinny.
What the job involves on each surface
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. The sealant is chosen for what passes through and how wide the gap is.
Plasterboard walls
We check that the board around the gap is sound. Loose material is removed so the sealant has a firm edge.
What happens if it’s left?
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own and needn’t wait for anything else. Wind-driven rain gets into any failed joint on the outside of a city building, and in Anniesland, damp can spread through stone and plaster before anyone sees it.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
What you get with us
- Every job guaranteed for a year
- Full insurance on every job
- ARBOMaster approved applicator
- Anti-fungal silicone where joints get wet
Take a look at our cost guide or customer reviews.
FAQs for Anniesland
I let a flat near Anniesland station. Can you help?
Yes, landlords and agents are among the people we work for. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear price.
How do Scotland’s building regulations apply to fire-rated sealant in Anniesland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you certify the fire stopping?
Ratings and certificates aren’t something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves, and we install to them.
Is intumescent sealant the same as fire-rated sealant?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent types expand when heated, and they’re one option among several. We use whichever the specification and tested details call for.
Are you insured?
Yes. We’re fully insured.
Is standard sealant good enough for a fire gap?
No. It looks sealed but will not perform as fire stopping. A tested fire-rated product is needed and we can apply it for you.
Do you take on fire stopping in schools and offices?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. The order of work and access are planned with you.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.
For landlords and businesses
If you manage several properties in or around Anniesland, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Report cracked or damaged seals as soon as you notice them
- Tell trades working in the building that fire seals must be put back
- Photograph sealed gaps before they’re covered up
- Look in service cupboards and ceiling voids from time to time
Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. Later work is a common cause of damaged fire stopping.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
Nearby places to Anniesland
More services for Anniesland
What we can’t put right
A few problems are outside what sealant work can do:
- Openings too large for sealant, which need batts, boards or another system
- Issuing a fire rating or certificate for a building
- Assessing a building’s fire safety
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly.
Where we work in Anniesland
- Pipe & cable gaps
- Linear gaps
- Service penetrations
- Door frames
- Flats & HMOs
- Plasterboard & masonry