Glasgow · Scotland
Anniesland Gutter Sealing
Specialist gutter sealing for Anniesland: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Streaks down the brickwork from a leaking joint
- Fascia boards with gaps between them
- Damp patches inside below a leaking gutter
Gutter sealing in Anniesland
Sealant only bonds to a clean, dry joint. That is why we take out the old sealant and dirt first, then dry the joint before sealing. If you have dripping gutter ends and quick sealant fixes on gutters that didn’t last, we can help, whatever the surface.
Gutters and downpipes on tall city tenements are a long way up, so a leaking joint can run down the stone for months before anyone notices. In Anniesland, access needs planning, and work on shared parts may need the other owners’ agreement.
There’s a 12-month guarantee on every job.
- Place
- Anniesland (G13, G12, G14)
- Wider area
- Glasgow
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How the visit works
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes an hour or two for a few joints, longer for a full run. In a Scottish city, a lot of jobs are in tenement flats, up a common stair from a shared close. In Anniesland, it helps to know the floor, the door entry arrangements and the nearest parking.
- First we agree which joints need sealing.
- We clean out each joint.
- We make sure everything is dry.
- The sealant is applied and finished.
- The joints are checked once sealed.
Preparing for the visit
- Mention if the joints have been sealed before
- For business premises, tell us about site rules or sign-in
- Mention any leaks or damp you’ve noticed
Get a quote
Getting a quote is simple: let us know what needs doing and where and its rough size. A few photos by email make the job easier to understand, and we’ll take it from there.
Related advice
FAQs for Anniesland
Can you do gutter sealing in Anniesland?
Yes, Anniesland is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Who arranges sealant work on the shared parts of a tenement in Anniesland?
It generally goes through the owners together, or through the factor if the building has one. The Tenements (Scotland) Act 2004 sets the rules for common parts if the deeds don’t.
Can you seal over the old sealant?
No. The old sealant always comes out first, so the new sealant bonds properly.
Will sealant fix a dripping gutter joint?
Yes, as long as the gutter itself is in good order. We clean and dry the joint before sealing so the sealant bonds.
What information do you need?
Only a few details: the address or postcode, what’s wrong and any access issues. Then drop us a line at info@mrmastic.co.uk.
Should I try DIY first?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
Where is Mr Mastic based?
We’re based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
How long does the job take?
A typical job takes anything from an hour or two to a few hours, including preparation and clearing up. Your quote will say how long we expect yours to take.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
How we quote for gutter sealing
We quote each job individually. These are the things that affect it:
- Whether there’s mould to deal with
- Whether old sealant or filler has to be cut out
- The type of sealant required
- When we can work, for business premises
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What to tell us for a quote
Photos help, but a description is a good start. Please mention:
- Any access issues, like height or stairs
- What’s wrong with the joints now
- A few pictures by email, if you can
- If it’s domestic, commercial or a hotel
For a quote, email us at info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear price before any work starts.
What happens if it’s left?
Sealing over a dirty, wet joint is a quick fix that rarely lasts, but it soon lets go. Cleaning out and drying the joint first is what makes it last. Private landlords in Anniesland must meet the Repairing Standard, and damp or leaks can fall short of it, so failed sealant is best replaced before it becomes a complaint.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, drop us a line at info@mrmastic.co.uk and we will give you an honest view and a quote.
Why Anniesland customers choose us
- One-year guarantee on every job
- Sanitary silicone with an anti-fungal additive in wet areas
- We leave the area clean and tidy
- We agree the colour with you first
Read what affects the cost or what customers say.
Surface by surface
Gutter end caps
A leaking end cap sends water straight down the wall. It’s a quick reseal.
uPVC fascias
We seal fascia joints, not replace the boards. If boards are damaged, we’ll tell you.
Towns and villages near Anniesland
Also in Anniesland
When to call us in Anniesland
A sealant applied to a damp or dirty joint will not bond. Rushed repairs often don’t last long for this reason.
The problems people usually mention when they call include:
- Open joints in fascias and soffits
- Drips from gutter joints and end caps
- Garage door frames letting rain in
- Old sealant on roofline trims that has split
Managing a site like Knightswood Secondary School? Then its movement joints, gutters and trims need looking after like any other building’s.
Questions to ask before you book
- Whether the sealant suits the joint
- How the joint is cleaned and prepared
- The length of the guarantee
- Whether they seal over old material or remove it
What gutter sealing looks like in Anniesland
The west of Scotland is wetter than the east, which means gutter, fascia and roofline joints has to cope with a lot of rain. Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex.
Homes close to Jordanhill Parish Church include some older properties, and old and new materials meet at the roofline and walls, which is where sealant earns its keep. If you let a flat or house near Anniesland station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Anniesland is about 2 miles south of Bearsden, in Glasgow. For gutter sealing in and around Anniesland, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We cover Glasgow from our Crawley base. 183 places in Glasgow are on our list.
All of G13, G12 and G14 is within our area for gutter sealing, from the main roads to the quietest streets. We cover properties on Crow Road, Fern Lane and Ryvra Road and the roads around them. Main roads around Anniesland include the A82, which makes travel easy. Nearby, we also carry out gutter sealing in Anniesland Cross (1 mile east), Temple (1 mile north-east), Knightswood (1 mile north-west), Netherton (1 mile north) and Jordanhill (1 mile south-west). Within a short drive, we also cover Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south-east).
Near you in Anniesland
Locally, jobs take us to homes and businesses close to The Esquire House, Scotstoun Primary School and Victoria Park, among other places. There’s a railway station in Anniesland itself: Anniesland station. Well-known places in the area include Braehead (1.6 miles south-west) and Glasgow Museum of Transport (2 miles south-east). For a walk, there’s Castle Hill and Kilmardinny.