Glasgow · Scotland
Cowlairs Fire Rated Sealant
Fire-stopping gaps in Cowlairs need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- New service routes left unsealed after building work
- Gaps filled with a product that isn’t fire-rated
- Gaps where walls meet ceilings or slabs
How the visit works
There is not much for you to do on the day. Show us the job and we will take it from there. The work itself takes anything from a few hours to several days, depending on how many gaps there are. In a city area like Cowlairs, parking may be by permit or pay-and-display, so tell us what’s nearby. If you are in a flat, let us know how we get in at the street door.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Move anything stored near the joints
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
For a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.
Related advice
Fire rated sealant in Cowlairs
Fire stopping only performs as intended if it’s done to the detail: the right depth, the right backing and the right product for the substrate. That is the part we focus on, gap by gap. We work on pipe & cable gaps, door frames and plasterboard & masonry, and the jobs we see most are open holes round services passing through fire walls and door frames with gaps between frame and wall.
Scotland’s cities have offices, hotels, student flats, care homes and tenement blocks looked after by factors. For a building in Cowlairs, the job might be washroom resealing or fire-rated sealant around service openings.
The work is covered for a year after we finish. If anything isn’t right with it, drop us a line at info@mrmastic.co.uk.
- Where
- Cowlairs (G22, G21, G4)
- Wider area
- Glasgow
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What affects the cost of fire rated sealant
You’ll get a clear quote before work begins. It takes into account:
- Whether the work is at height
- Whether old sealant or filler has to be cut out
- How much there is to do
- Any working-time requirements on site
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
What we need to know
When you call or email, these details help:
- What’s wrong with the joints now
- Where the property is
- The type of property
- Any access issues, like height or stairs
If you are in Cowlairs and need fire rated sealant, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we’ll agree the price before any work begins.
What sealant work can’t fix
Before booking, it’s worth knowing the limits too:
- Big openings where sealant alone isn’t the tested solution
- Fire risk assessments, which need a qualified assessor
- Construction that doesn’t provide fire resistance on its own
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly.
Joints and surfaces we work on
- Door frames
- Plasterboard & masonry
- Linear gaps
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
Should I try it myself first?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Why deal with it now?
Sealant isn’t the fix for every opening. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we will tell you. In a Scottish city tenement, failed sealant affects more than one flat: water can reach the flat below, and gaps in shared walls or fire-stopping affect the whole stair.
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.
What you get with us
- Full insurance on every job
- Rated 4.9 stars on Google
- Any old sealant cut out fully, not covered over
- Homes, businesses and hotels
Take a look at how sealant jobs are priced and what customers say.
Different surfaces, different methods
Flats and HMOs
Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product.
Plasterboard walls
Holes in plasterboard are often cut roughly for services. Where a hole is bigger than the sealant’s tested range, it needs another approach and we’ll flag it.
Fire rated sealant in Cowlairs: local notes
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments. There are hotels and other places to stay in and around Cowlairs. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
If you let a flat or house near Ashfield station, any gap left by new services in shared walls should be closed with a fire-rated product.
Cowlairs is about 2 miles south-west of Bishopbriggs, in Glasgow. From the centre of Cowlairs to the outskirts, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Across Glasgow, we cover 183 places, Cowlairs among them.
Postcode districts we cover here for fire rated sealant: G22, G21 and G4. Local streets include Atlas Road, Walnut Road and Cowlairs Road, and we cover them all. Cowlairs sits on or near the A803 and A879. If you’re just outside Cowlairs, we cover Possilpark (1 mile north-west), Parkhouse (1 mile north-west), Port Dundas (1 mile south-west), Hamiltonhill (1 mile west) and Sighthill (1 mile south). Larger places within reach include Partickhill (3 miles west), Hyndland (3 miles west), Langside (4 miles south), Yoker (5 miles west), Partick (3 miles west) and Mount Florida (4 miles south).
Near you in Cowlairs
We work in homes and buildings around Springburn Park and Andersonian Library. The closest station to Cowlairs is Ashfield station, about 0.5 miles north-west of the centre. Nearby you will also find Heatherbank Museum of Social Work (1.1 miles south) and Oakbank Hospital (0.9 miles south-west). Not far away are Lenzie Moss and Hogganfield Loch.
FAQs for Cowlairs
Are the rules for fire-rated sealant different in Scotland?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can you help a landlord with a rental near Ashfield station?
Yes. We work for landlords and agents as well as householders. You can email us at info@mrmastic.co.uk with the details for a clear quote.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
What fire rating will the seal have?
Ratings and certification sit with the product’s test evidence and whoever specified the work. Our part is installing the specified product to its tested details and giving you a record of where it went.
How long will you be here?
As a guide, most jobs take a few hours for a handful of gaps, and longer for a whole building. Bigger jobs take longer, and we’ll tell you how long to expect.
Can you seal over the old sealant?
No, because it fails. We remove every bit of old sealant first, so the new sealant bonds properly.
Is the work guaranteed?
Yes, for a year. If there’s a problem with our work in that time, tell us and we will put it right.
What we are called out for in Cowlairs
Much fire stopping is hidden: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.
Common reasons people contact us are:
- Linear gaps at the head of walls
- Old fire sealant that has split or come away
- Gaps filled with a product that isn’t fire-rated
- Open holes round services passing through fire walls
If you look after a building such as St. Roch's Secondary School, service openings in fire-resisting walls need checking after any refurbishment.
What your quote should include
- Which sealant they’ll use, and why
- How the surfaces are prepared before sealing
- What happens if the job turns out different
- What guarantee comes with the work