Aberdeenshire · Scotland
Oldmeldrum Fire Rated Sealant
Fire rated sealant in Oldmeldrum from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Cracked or shrunken fire-rated sealant
- Gaps flagged on a fire risk assessment
- Open holes round services passing through fire walls
Fire rated sealant in Oldmeldrum: local notes
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments. There are hotels and other places to stay in and around Oldmeldrum. Hotel work can be planned room by room, with out-of-hours working where needed.
For site and facilities teams at buildings such as Meldrum Academy, service openings in fire-resisting walls need checking after any refurbishment.
Oldmeldrum is about 4 miles north-east of Inverurie, in Aberdeenshire. If you need fire rated sealant in Oldmeldrum, please email us at info@mrmastic.co.uk for a quick quote. We cover Aberdeenshire from our Crawley base, Oldmeldrum included. Our area takes in 161 places across Aberdeenshire, from the larger towns to small villages. Aberdeen is on our list too, about 15 miles from Oldmeldrum.
Here we cover the AB51 postcode area for fire rated sealant. You will find streets such as Station Road, Cowgate and Lower Cowgate, all of which we cover. Being close to the A920 and A947, Oldmeldrum is simple for us to get to for fire rated sealant. Other places close to Oldmeldrum include Hattoncrook (3 miles south-east), Inverurie (4 miles south-west), Garioch (4 miles south-west), Daviot (4 miles west) and Tarves (4 miles north-east). Larger places within reach include Westhill (13 miles south), Ellon (9 miles east), Turriff (15 miles north), Kemnay (8 miles south-west), Kintore (7 miles south) and Insch (11 miles west). Island and remote addresses take a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
Near you in Oldmeldrum
We work in homes and buildings around Meldrum Arms Hotel, among other places. For rail, the closest station is Inverurie station, about 4 miles south-west of the centre. A little further out are House Of Daviot Hospital (4.1 miles west) and Mounie Castle (2.7 miles west).
About our fire rated sealant in Oldmeldrum
Bigger jobs can be worked through in stages, flat by flat or floor by floor, with each location and product recorded. It gives you a list to keep with the building’s fire safety documents. Common call-outs are for sealant items on a fire risk assessment action list and ordinary sealant used where a fire-rated product was needed, on service penetrations, door frames and flats & HMOs.
If you look after holiday lets, a guest house or a community building in or near Oldmeldrum, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
Every job comes with our one-year guarantee.
- Place
- Oldmeldrum (AB51)
- Region
- Aberdeenshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Do you need fire rated sealant in Oldmeldrum?
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. We see plenty of fire stopping that was hurried, especially where it was squeezed in at the end of a project.
Any of these means the joints need attention:
- Seals cut through by electricians, plumbers or data installers
- Standard silicone or caulk in a fire-stopping gap
- Open gaps behind door architraves
- Gaps flagged on a fire risk assessment
If you let a flat or house near Inverurie station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Before you book anyone
- How the joint is cleaned and prepared
- How the colour is chosen
- What product goes in the joint
- Whether they seal over old material or remove it
Surface by surface
Masonry and concrete
Masonry is dusty and porous, so preparation matters. We brush and vacuum the gap and use backing where the detail needs it.
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in over any backing the detail calls for.
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Towns and villages near Oldmeldrum
Other services in Oldmeldrum
What we can’t put right
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Certifying a building or signing off its fire safety
- Big openings where sealant alone isn’t the tested solution
- Assessing a building’s fire safety
If in doubt, email us at info@mrmastic.co.uk and we will say what we think.
What we seal
- Pipe & cable gaps
- Flats & HMOs
- Door frames
- Plasterboard & masonry
- Linear gaps
- Service penetrations
Your questions about fire rated sealant in Oldmeldrum
Can you help a landlord with a rental near Inverurie station?
Yes, we work for letting agents and landlords. Just email us at info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.
Do you take on hotel work around Oldmeldrum?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
What does fire rated sealant cost?
It depends on the job, so we quote each one individually. For a quick quote, email us at info@mrmastic.co.uk and tell us what needs doing and where.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
What does intumescent mean?
An intumescent material expands when it’s heated. Many fire-rated sealants work this way, but not all, and the choice depends on the gap.
Is it OK to seal over old sealant?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
Can ordinary silicone be used in a fire-stopping gap?
No. Standard sealants are not made or tested to stop fire. We cut it out and reseal with a fire-rated product.
Why deal with it now?
If an assessor has flagged gaps, it makes sense to close them before the next review. Having them sealed and recorded now means you can show the action was taken. In an older home around Oldmeldrum, damp from a failed joint can get into timber and plaster.
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and agree the price before starting.
Why us?
- Domestic, commercial and hotel work
- ARBOMaster approved applicator
- A 12-month guarantee on all work
- Rated 4.9 stars on Google
See our cost guide or customer reviews.
How it works
There isn’t much for you to do on the day. Point us to the joints and we’ll get on with it. The work itself takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Oldmeldrum may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Tell us if parking is tricky
- Clear items away from the joints we are working on
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
To get a quote, drop us a line at info@mrmastic.co.uk with the location and a short description of the problem. We’ll give you a clear price before any work starts.
Related advice
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- File the fire-stopping record where your assessor can find it
- Ask every contractor to reseal any fire stopping they disturb
- Include hidden areas like risers in routine checks
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some cannot, so ask us which we used.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.