Aberdeenshire · Scotland
Kintore Fire Rated Sealant
Our applicators work in Kintore on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly.
- Damaged fire sealant left by other trades
- Standard silicone or caulk in a fire-stopping gap
- Holes left by a change of layout
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Check whether a sealant can be painted before decorating over it
- Look in service cupboards and ceiling voids from time to time
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Flag any open gap you spot round a pipe or cable
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and get them seen to.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the job gets bigger.
How we handle fire rated sealant in Kintore
Filling a fire-stopping gap with standard silicone or caulk doesn’t make it fire-rated. Anything unsuitable comes out first and reseal with a fire-rated product tested for that kind of gap. We work on pipe & cable gaps, plasterboard & masonry and linear gaps, and the jobs we see most are open gaps behind door architraves and seals cut through by electricians, plumbers or data installers.
Work in a place like Kintore is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.
Your job is guaranteed for a year, as with all our work.
- Location
- Kintore (AB51)
- Region
- Aberdeenshire
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Also in Kintore
Landlords, agents and businesses in Kintore
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote.
What we’re called out for in Kintore
Much fire stopping is hidden: in ceiling voids, service risers and behind boxing. Out of view, damage sits unnoticed until someone inspects.
Common reasons people contact us include:
- Standard silicone or caulk in a fire-stopping gap
- Holes left by a change of layout
- Linear gaps at the head of walls
- Open holes round services passing through fire walls
Rented homes near Kintore station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
What your quote should include
- How much experience the applicator has
- How hidden problems are handled
- Is the old sealant removed completely?
- Whether the sealant suits the joint
When it is not the sealant
Some problems need a builder, plumber or other trade rather than us:
- Construction that doesn’t provide fire resistance on its own
- Large holes that need a different fire-stopping system
- Fire risk assessments, which need a qualified assessor
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly before booking.
What we seal
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Door frames
- Plasterboard & masonry
- Flats & HMOs
Why deal with it now?
Fire-rated sealants need more care than everyday sealant. Depth, backing and surface preparation all affect how a seal performs, so we follow the maker’s details on every gap. In a place like Kintore, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts.
Why us?
- Old sealant always removed completely
- Domestic, commercial and hotel work
- Anti-fungal sanitary silicone in wet areas
- Rated 4.9 stars on Google
Read what affects the cost and our reviews.
The process
All our tools and materials come with us in the van. After a quick look at the joints together, the area is protected and the work begins. It normally takes from a few hours to a few days, depending on the number of gaps and the access. Around Kintore, distance and access matter more than parking. Let us know how to find you and how to reach the joints.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used.
Preparing for the visit
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
- On commercial sites, let us know about site rules
Get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, email us at info@mrmastic.co.uk.
Advice
Commercial buildings in Kintore
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments.
Community buildings like Parish Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Kintore is about 4 miles south of Inverurie, in Aberdeenshire. Every kind of property in Kintore is covered for fire rated sealant. Every job comes with our one-year guarantee. Kintore is one of 161 places in Aberdeenshire we cover. You can also see our page for Aberdeen, roughly 10 miles from Kintore.
Every address in AB51 is within our area for fire rated sealant, from the main roads to the quietest streets. You’ll find streets such as Henderson Park, Mcfadden Park and Castlepark Grove, and we cover them all. Being close to the A96 and B977, Kintore is simple for us to get to for fire rated sealant. We also cover the places around Kintore: Cottown (1 mile west), Kinellar (2 miles south-east), Port Elphinstone (3 miles north), Kinmuck (3 miles north-east) and Garioch (4 miles north). We also work in nearby towns such as Westhill (6 miles south), Ellon (14 miles north-east), Banchory (13 miles south-west), Kemnay (4 miles west), Oldmeldrum (7 miles north) and Alford (13 miles west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Near you in Kintore
The closest station to Kintore is Kintore station, about 0.7 miles north. A little further out are Hallforest Castle (0.8 miles south-west) and Little Treasures: Toy Museum & Shop (2.5 miles west). Not far away are Tuach Hill.
Questions from Kintore
Do you work for landlords with property near Kintore station?
Yes, we work for landlords and letting agents. You can send an email to info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before we start.
Do you cover smaller places like Kintore?
Yes, Kintore is covered. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you work in occupied buildings?
Yes. Occupied flats, HMOs, offices and schools are all fine, with access planned around residents or staff. Early starts or out-of-hours work can be arranged where it’s needed.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Do you do fire sealant around door frames?
Yes, where the gap suits a sealant detail. Our work is the gap around the frame and we will tell you if we spot problems with the door.
Can I do it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
How do I get a quote for fire rated sealant in Kintore?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before any work starts.
Where do you work from?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
How we quote for fire rated sealant
Your quote is based on your job. We look at:
- How many areas need sealing
- When we can work, for business premises
- The old material and how stubborn it is
- The product the joint needs
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Asking for a quote
To help us quote quickly, please include:
- Any previous sealing or DIY work
- Where the property is
- Whether it’s a home or a business
- Pictures of the joints, sent by email
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we will come back to you with a quote.