Aberdeenshire · Scotland
Kintore Remedial Sealant
Remedial sealant across Kintore and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Sealant applied over old sealant that has lifted
- Repeat leaks from the same joint
- Wide, uneven beads that look worse than the old ones
About our remedial sealant in Kintore
Remedial jobs in Kintore usually fall into a few patterns: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. We strip each one back and start from scratch. If you have a shower that leaks however often it’s resealed and torn expansion joints, we can help, on leaking tray & enclosure joints, shrunken worktop sealant and mouldy bath & shower sealant alike.
A bathroom in a place like Kintore gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
Every job comes with a one-year guarantee.
- Place
- Kintore (AB51)
- Region
- Aberdeenshire
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Surface by surface
Over-sealed & botched joints
Previous removal attempts can leave scratches or gouges. We work carefully to avoid adding to it, and tell you about any damage we find.
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, tray edges and screen profiles included.
Landlord and commercial work in Kintore
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
We also work for property managers and facilities teams in Kintore and across Aberdeenshire. We can quote a run of properties together.
What else we do in Kintore
How we quote for remedial sealant
Jobs vary more than people expect. The main factors:
- How many rooms, windows or areas are involved
- How easy the joints are to reach
- The number and length of the joints
- The type of sealant required
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What to tell us for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- The rough size of the job
- If someone has resealed it before
- The problem you’ve noticed
- Where the job is, and your postcode
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.
Can I do it myself?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Questions from Kintore
I let a flat near Kintore station. Can you help?
Yes. We work for landlords and letting agents as well as householders. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Kintore?
Yes, we do. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you guarantee remedial jobs?
Yes, with our 12-month guarantee. Where we have flagged another fault, it needs fixing for the joint to last.
Can old silicone be taken off without scratching the tiles?
Yes, with care. We cut and lift the old sealant with tools suited to the surface, then clean off the residue. Any existing damage is pointed out before work begins.
Is there any odour?
Some sealants have a smell while they cure. Opening a window helps.
What happens if the problem is the tray or the plumbing?
That is why we look for the cause first. If we find the leak is elsewhere, we tell you before going further.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can I add another job to the visit?
Yes, and it often makes sense. Doing several areas at once is usually more efficient.
Signs you need remedial sealant in Kintore
Sealant needs a clean, dry surface with no grease on it. Soap film, dust, damp or old residue stop it gripping, and the joint starts to come away early.
Most people get in touch after spotting something like this:
- Beads that never stuck properly
- Thick, messy sealant smeared over tiles
- Sealant applied over old sealant that has lifted
- A shower that leaks however often it’s resealed
Letting a property close to Kintore station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
What your quote should include
- Is VAT in the price?
- Is the old sealant removed completely?
- Who does the work, and how experienced they are
- How long to leave it before use
How the visit works
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for most joints, depending on how much old sealant has to come out and we leave things clean and tidy. Outdoor work around Kintore depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
How to prepare
- Move anything stored near the joints
- For indoor joints, keep the area dry beforehand if you can
- For business premises, tell us about site rules or sign-in
How to get a quote
Need a quote? Please send an email to info@mrmastic.co.uk with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Why deal with it now?
Mould under a bead cannot be reached by cleaning. Removal is the only way to get at it, so the joint can be treated and resealed. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
What you pay reflects the work, not guesswork. That is why we ask a few questions first and give you a clear quote before any work starts.
Why book with us
- Every job guaranteed for a year
- White, clear, grey or another colour, product permitting
- Any old sealant cut out fully, not covered over
- Trusted Arbo and Everbuild sealants
See what affects the cost and customer reviews.
What remedial sealant looks like in Kintore
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Homes close to Parish Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Kintore is about 4 miles south of Inverurie, in Aberdeenshire. Wherever you are in the AB51 postcode area, our applicators can take on remedial sealant. We cover 161 towns and villages across Aberdeenshire. Our Aberdeen page covers work nearby (10 miles or so).
Here we cover the AB51 postcode area for remedial sealant. We cover properties on Henderson Park, Mcfadden Park and Castlepark Grove and the roads around them. With the A96 and B977 close by, Kintore is simple for us to get to. If you are just outside Kintore, we cover Cottown (1 mile west), Kinellar (2 miles south-east), Port Elphinstone (3 miles north), Kinmuck (3 miles north-east) and Garioch (4 miles north). Within a short drive, we also cover Westhill (6 miles south), Ellon (14 miles north-east), Banchory (13 miles south-west), Kemnay (4 miles west), Oldmeldrum (7 miles north) and Alford (13 miles west). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Around Kintore
The closest station to Kintore is Kintore station, about 0.7 miles north. Nearby you will also find Hallforest Castle (0.8 miles south-west) and Little Treasures: Toy Museum & Shop (2.5 miles west). For a walk, there’s Tuach Hill.