Aberdeenshire · Scotland
Gutter Sealing in Kintore
Problem with your gutter and fascia joints in Kintore? We remove the old material, prepare the joints and seal them properly.
- Damp on an inside wall under a dripping gutter
- Water dripping where gutter sections meet
- Fascia boards with gaps between them
Gutter sealing in Kintore
Water dripping from a gutter joint can stain walls and soak the ground below. Resealing the joint is often all it needs, as long as the gutter is sound. Common call-outs are for quick sealant fixes on gutters that didn’t last and leaking gutter joints and stop ends, across gutter joints, roofline trims and soffit joints.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. Newer houses need their movement joints and roofline trims kept sound.
You get a 12-month guarantee, the same in Kintore as everywhere else we work.
- Where
- Kintore (AB51)
- Region
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Should I try it myself first?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
What else we do in Kintore
What gutter sealing looks like in Kintore
Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that. Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex.
In the older streets around Parish Church, an extension built onto an older house moves differently, and the joint between them takes the strain.
Kintore is about 4 miles south of Inverurie, in Aberdeenshire. Wherever you are in the AB51 postcode area, we cover gutter sealing for homes and businesses. Kintore is one of 161 towns and villages in Aberdeenshire where we work. You can also see our page for Aberdeen, roughly 10 miles from Kintore.
Work in AB51 works the same way as everywhere else we cover. Streets in the area include Henderson Park, Mcfadden Park and Castlepark Grove. Kintore is on the A96 and B977, so it’s easy for us to get to with everything needed for gutter sealing. Nearby, we also carry out gutter sealing in Cottown (1 mile west), Kinellar (2 miles south-east), Port Elphinstone (3 miles north), Kinmuck (3 miles north-east) and Garioch (4 miles north). Further out, we also cover Westhill (6 miles south), Ellon (14 miles north-east), Banchory (13 miles south-west), Kemnay (4 miles west), Oldmeldrum (7 miles north) and Alford (13 miles west). Remote and island addresses need a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Local landmarks in Kintore
Kintore’s nearest station is Kintore station, roughly 0.7 miles north of the centre. Well-known places in the area include Hallforest Castle (0.8 miles south-west) and Little Treasures: Toy Museum & Shop (2.5 miles west). For a walk, there’s Tuach Hill.
Surface by surface
Roofline trims
We reseal trim joints with an exterior sealant suited to the material.
uPVC fascias
Gaps in fascias spoil the roofline. Sealing them closes the gap.
Aftercare tips
Aftercare is simple:
- Clear leaves and moss from the gutters
- Look along the fascias for open joints
- Check that water runs out of the downpipes
- Get a dropping gutter looked at quickly
Make sure downpipes aren’t blocked so the gutter can drain. Blockages push water back along the gutter.
Leaking gutter joints get worse over time. Water keeps hitting the same part of the wall, which can lead to staining and damp.
FAQs for Kintore
Can you do gutter sealing in Kintore?
Yes, Kintore is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.
Will you come out to Kintore?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
What information do you need?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Do you work for letting agents?
Yes, often. Several properties can go on one quote.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected.
Do you hold any approvals?
Yes. We’re an ARBOMaster approved applicator.
Do you have insurance?
Yes. We are fully insured.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Why it’s worth doing now in Kintore
A bead squeezed onto a wet joint might hold for a while but it tends to peel off. Proper preparation is the difference. In a place like Kintore, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
What you pay reflects the work, not guesswork. That is why we ask a few questions first and give you a clear quote before work begins.
What you get with us
- A 12-month guarantee on all work
- Tidy, careful work
- We agree the colour with you first
- Quality sealants from Arbo and Everbuild
See our cost guide and our reviews.
Signs you need gutter sealing in Kintore
End caps get knocked or pushed by water. If the seal fails, water escapes at the end and runs down the wall.
Most people get in touch when they notice one of these:
- Gaps along fascia and soffit joints
- Dripping gutter ends
- Earlier gutter repairs that have peeled off
- Streaks down the brickwork from a leaking joint
Rented homes near Kintore station change hands often, and leaking gutter joints on a rental are best caught before they stain the walls.
Questions to ask before booking
- What the quote includes, VAT included or not
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
- What product goes in the joint
How it works
There’s no need to move everything out before we come, just the space around the work. We protect the rest, and the job takes an hour or two for a few joints, longer for a full run for a typical job. Somewhere like Kintore may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We look at the gutters, fascias and trims and agree the joints to seal.
- Each joint is cleaned and any old sealant removed.
- The joints are dried.
- We apply exterior or gutter sealant and finish it neatly.
- We check our work before we leave.
How to prepare
- Mention any leaks or damp you’ve noticed
- On commercial sites, let us know about site rules
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
There’s no standard price list. Instead, your job gets its own clear quote. To get started, send an email to info@mrmastic.co.uk.
Related advice
How we quote for gutter sealing
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Mould in or behind the old joints
- The product the joint needs
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
What it costs depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before any work starts.
What to tell us for a quote
You do not need to know the technical terms. Just tell us:
- The type of property
- Where the property is
- The problem you’ve noticed
- How we’d reach the joints
For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before we start.