Aberdeenshire · Scotland
Oldmeldrum Remedial Sealant
Remedial sealant for Oldmeldrum, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Movement joints that have split or pulled away
- Decorators’ caulk around a bath or shower
- Thick, messy sealant smeared over tiles
Signs you need remedial sealant in Oldmeldrum
Water from somewhere else can ruin a good seal. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.
Keep an eye out for these signs:
- Sealant that came away because the surface wasn’t prepared
- Kitchen joints letting water behind the worktop
- A shower that leaks however often it’s resealed
- Floor or wall movement joints that have failed
Rented homes near Inverurie station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants.
Comparing quotes
- What happens if they find a problem under the old sealant
- What the quote includes, VAT included or not
- Whether you can choose the colour
- What guarantee comes with the work
Remedial sealant for homes and businesses in Oldmeldrum
If a joint has been resealed and is leaking again, it’s worth a proper look. Send photos when you email us at info@mrmastic.co.uk, and say how long ago it was last done. Common call-outs are for floor or wall movement joints that have failed and gaps opening along the back of the worktop, on shrunken worktop sealant, expansion joints and leaking tray & enclosure joints.
For a place like Oldmeldrum, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.
Every job comes with our 12-month guarantee, wherever you are in Aberdeenshire.
- Where
- Oldmeldrum (AB51)
- Region
- Aberdeenshire
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Towns and villages near Oldmeldrum
Other services in Oldmeldrum
When it isn’t the sealant
Sealant is not the answer to every problem, and we will tell you before any work starts. Sealant will not put right:
- A bath, tray or worktop that moves until it’s properly fixed
- A tray or bath that’s cracked
- Water damage behind tiles that needs a tiler
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly before you book.
Surfaces we seal
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Expansion joints
- Leaking tray & enclosure joints
- Failed movement joints
- Shrunken worktop sealant
What happens if it’s left?
Adding more sealant is the usual quick fix, and it rarely works. It does not grip the old layer, leaving the leak in place and one more layer to cut out later. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.
Why us?
- Old sealant always removed completely
- Homes, businesses and hotels
- Anti-fungal sanitary silicone in wet areas
- Colour agreed with you before we start
Take a look at how sealant jobs are priced or customer reviews.
What the job involves on each surface
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath, and then we reseal it neatly.
Leaking trays & enclosures
A shower that leaks after resealing often has a tray that moves or an enclosure sealed on the wrong side. We check both before any new sealant goes on.
Bathrooms and kitchens in Oldmeldrum
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Schools such as Meldrum Academy are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Oldmeldrum is about 4 miles north-east of Inverurie, in Aberdeenshire. Anywhere in AB51, our applicators can take on remedial sealant. We cover 161 towns and villages across Aberdeenshire, large and small. For nearby work, see our Aberdeen page (15 miles or so).
Every address in AB51 is covered for remedial sealant, from the main roads to the quietest streets. Whether your property is on Station Road, Cowgate and Lower Cowgate or a nearby road, our applicators can take on the job. Being close to the A920 and A947, Oldmeldrum is easy for our applicators to reach. We also cover Hattoncrook (3 miles south-east), Inverurie (4 miles south-west), Garioch (4 miles south-west), Daviot (4 miles west) and Tarves (4 miles north-east). Further out, we also cover Westhill (13 miles south), Ellon (9 miles east), Turriff (15 miles north), Kemnay (8 miles south-west), Kintore (7 miles south) and Insch (11 miles west). Remote and island addresses need a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
Near you in Oldmeldrum
Around Oldmeldrum, our work takes us to homes and buildings near Meldrum Arms Hotel. The closest station to Oldmeldrum is Inverurie station, roughly 4 miles south-west of the centre. Nearby you will also find House Of Daviot Hospital (4.1 miles west) and Mounie Castle (2.7 miles west).
The process
On the day, we start by going over the job with you. We protect the surfaces around the joints before work begins. The work generally takes a few hours, depending on how many layers have to come out. Somewhere like Oldmeldrum may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Before we arrive
- Keep children and pets away from the work area
- Clear the area around the work
- Mention any sign-in or site rules at work premises
How to get a quote
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved.
Related advice
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Always have old sealant cut out, not covered
- Air the bathroom so the sealant can dry
- Act on a lifting corner right away
- Don’t point over movement joints
Where we’ve pointed out another fault, have it put right, or the new joint may fail again.
Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.
Oldmeldrum questions
Will you come out to Oldmeldrum?
Yes, Oldmeldrum is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for hotels and guest houses in Oldmeldrum?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Can you fix a reseal that hasn’t worked?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Is remedial work guaranteed?
Yes. Remedial work carries the same 12-month guarantee as all our work.
What do you need from me for a quote?
A short description and the location. We’ll ask anything else we need to know.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all.
How long will it take to strip and reseal the joint?
The number of joints and layers decides it. You’ll have a timescale before any work begins.