Angus · Scotland
External & façade joints in East Haven, Angus
Problem with your movement joints in East Haven? We cut out the old, prepare the joints and apply the right sealant.
- Damp patches traced to an open external joint
- Leaking joints around cladding and façade panels
- Sealant pulling away from one side of the joint
About our external mastic in East Haven
We’re ARBOMaster approved applicators, and each external joint gets a sealant suited to it. Porous or awkward surfaces are primed where the sealant needs it. If you have sealant pulling away from one side of the joint and leaking joints around cladding and façade panels, we can put it right.
Older stone buildings need a sealant that suits the stone, not an acetoxy product that can mark or attack it. On newer homes, the movement joints and roofline trims are what need watching.
You are covered for a year from the day we finish. If there’s a problem with it, please send an email to info@mrmastic.co.uk.
- Where
- East Haven (DD7)
- Region
- Angus
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
When something else is needed
It helps to know what we cannot do:
- Movement that’s more than a sealant joint can take
- Rising or penetrating damp from elsewhere in the wall
- Cracks in the bricks or render themselves, away from the joints
If you are not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer.
Surfaces we seal
- Joints between brick and frames
- Façade panels
- Brickwork movement joints
- Copings & trims
- Concrete & block
- Render & cladding joints
How we quote for external mastic
Jobs vary more than people expect. What affects the quote:
- The old material and how stubborn it is
- How many areas need sealing
- The type of sealant required
- Working hours on commercial sites
Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
What to tell us for a quote
When you call or email, these details help:
- If it’s domestic, commercial or a hotel
- Roughly how big the job is
- Any previous sealing or DIY work
- The address or postcode of the job
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved before giving you a price.
How the job changes by surface
Brickwork movement joints
Vertical joints in long brick walls let the brickwork expand without cracking. They’re resealed over backing rod with a low-modulus sealant in a colour to suit the brick.
Concrete and blockwork
Concrete and block walls shrink as they dry and move with temperature. We reseal their joints with backing rod and a flexible product.
Do you need external mastic in East Haven?
Joints sealed without backing rod, or far too deep, rarely last. Sealant bonded to three sides has nowhere to go and tears as soon as the joint widens.
People normally contact us when they notice something like this:
- Cracked joints where brick meets render or frames
- Brick movement joints where the sealant has split
- Leaking joints around cladding and façade panels
- Sealant that has lost its bond to the brick or render
If you let a flat or house near Carnoustie station, failed wall and movement joints let damp in, so they’re worth checking between tenancies.
What your quote should include
- What the quote includes, VAT included or not
- Whether they seal over old material or remove it
- When the joint can take water or movement
- Who turns up on the day
East Haven questions
Do you cover smaller places like East Haven?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Does the coastal weather in East Haven affect outside sealant?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. The right product, a clean joint and the right depth all help it cope.
How do you reach high-level joints?
That depends on the building and the joints. Where joints can be reached safely, we will do them. Give us some details and we’ll confirm the access.
Do I have to be there?
It depends on the job. For work indoors, someone needs to let us in.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Can you seal joints between render and window frames?
Yes. Joints between dissimilar materials are a big part of external work. We use a flexible sealant suited to both surfaces.
East Haven buildings and the weather
East Haven is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on movement joints and outside wall joints, which can dry out and crack sooner where a building faces the weather. Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.
Managing a site like Carnoustie High School? Then its movement joints, gutters and trims need looking after like any other building’s.
East Haven is about 4 miles south-west of Arbroath, in Angus. Our applicators cover external mastic for homeowners, landlords and businesses in East Haven and nearby. 40 places in Angus are on our list, large and small. For nearby work, see our Dundee page, about 12 miles away.
Work in DD7 works the same way as everywhere else we cover. Streets in the area include Torrie Park and Beach Road, all of which we cover. Nearby, we also carry out external mastic in Panbride (1 mile west), West Haven (2 miles south-west), Balmirmer (2 miles north-west), Carlogie (2 miles west) and Carnoustie (2 miles south-west). Within a short drive, we also cover Arbroath (4 miles north-east), Forfar (12 miles north-west), Brechin (15 miles north), Hunter's Town (3 miles south-west), Gardynebourg (3 miles south-west) and Letham (9 miles north-west).
What’s near East Haven
The nearest railway station is Carnoustie station, about 1.8 miles south-west of the centre. Well-known places in the area include Hospital of St John the Baptist (3.4 miles north-east) and Panmure Castle (2.9 miles west).
Can I do it myself?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Towns and villages near East Haven
Also in East Haven
What happens on the day
When we arrive, we start by going over the job with you, so you know exactly what we are doing. We protect the surfaces around the joints before any work starts. The work generally takes anything from a few hours to several days, depending on the building. Somewhere like East Haven may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First, the joints are inspected and the access agreed.
- Every bit of old sealant and any mortar or debris is cut out.
- Joint faces are cleaned back and primed if the sealant needs it.
- We fit closed-cell backing rod to control the depth.
- We apply the sealant, tool it and check the whole run.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about any previous sealing or DIY attempts
- For business premises, tell us about site rules or sign-in
How to get a quote
For external mastic in East Haven, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you’ll get a clear quote before work begins.
Related advice
Why deal with it now?
Resealing a run of joints in one go is generally better than patching one at a time. They’ve weathered the same way. In a place like East Haven, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please email us at info@mrmastic.co.uk.
Why East Haven clients choose us
- Colour agreed with you before we start
- Old sealant always removed completely
- 180+ five-star Google reviews
- Homes, businesses and hotels
Take a look at what affects the cost and customer reviews.