Isle of Wight · England
External & façade joints in Cross Lane, Isle of Wight
Sealing brickwork movement joints, render, cladding and façade joints in Cross Lane, with a one-year guarantee on every job. Call for a quick quote.
- Damp patches traced to an open external joint
- Brick movement joints where the sealant has split
- Failed seals between different materials
About our external mastic in Cross Lane
We’re ARBOMaster approved applicators, and each external joint gets a sealant suited to it. Some surfaces need a primer before sealing and we use one wherever it does. If you are dealing with cracked joints where brick meets render or frames and leaking joints around cladding and façade panels, we can put it right, on façade panels, brickwork movement joints and copings & trims alike.
Homes around Cross Lane range from older cottages to newer houses, with walls and rooflines of every type. Older homes need their gutter and trim joints kept tight, newer ones their movement joints.
All our work is covered by a one-year guarantee, wherever you are in the Isle of Wight.
- Place
- Cross Lane (PO30, PO31, PO41)
- Wider area
- Isle of Wight
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Signs you need external mastic in Cross Lane
Every building moves. Clay bricks expand slightly over their life, concrete and block shrink, and everything moves with temperature and wet. All of that ends up in the joint sealant.
If you can see any of these, it’s time to have the joints looked at:
- Weeds or debris growing in open joints
- Joints with sealant missing in places
- Sealant pulling away from one side of the joint
- Water getting into walls through failed joints
In the older streets around St Paul's Church, older walls, gutters and the joints where extensions meet them need a flexible sealant.
What your quote should include
- Is the old sealant removed completely?
- Whether you can choose the colour
- What insurance they hold
- What happens if they find a problem under the old sealant
How we quote for external mastic
There’s no set price list. The quote depends on:
- Access and height
- The number and length of the joints
- Mould in or behind the old joints
- The number of rooms or windows
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- Pictures of the joints, sent by email
- Access, such as stairs, a lift or height
- Any previous sealing or DIY work
- How many joints, rooms or windows are involved
Asking for a quote is easy: let us know the job and the location. A few pictures by email make the job easier to understand.
How to look after the new joints
Aftercare is simple:
- Check external joints each spring
- Keep soil, plants and ivy away from the joints
- Ask before painting over external sealant
- Keep movement joints as flexible joints, not mortar
Follow the cure time we give you before the joint is knocked or disturbed. Most exterior sealants skin fast but take longer to cure right through.
Act while the splits are small. Then it’s a straightforward cut-out and reseal.
What else we do in Cross Lane
How it works
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes anything from a few hours to several days, depending on the building. In a smaller place like Cross Lane, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We look at every joint and agree a colour to suit the wall.
- Failed sealant is removed back to clean, sound faces.
- Backing rod goes in so the sealant can stretch between the two faces.
- We prime the faces where required.
- A low-modulus exterior sealant is gunned in and tooled to a neat finish.
Before we arrive
- Clear the area around the work
- Try not to wet indoor joints just before the visit
- Mention any parking rules near the property
How to get a quote
If you’re in Cross Lane and need external mastic, phone 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.
Read more
What external mastic looks like in Cross Lane
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Carisbrooke Castle (about 1.7 miles south-west) are a reminder that the area around Cross Lane has older buildings as well as new. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
Managing a site like Summerfields Primary School? Then its movement joints, gutters and trims need looking after like any other building’s.
Cross Lane is about 1 mile north-east of Newport, in the Isle of Wight. Across the PO30 area, we cover external mastic for homes and businesses. Cross Lane is one of 125 towns and villages in the Isle of Wight where we work for external mastic. There’s also a page for Portsmouth, roughly 12 miles from Cross Lane.
All of PO30, PO31 and PO41 is within our area for external mastic. Whether your property is on Ash Road, Chain Lane and Beech Road or a nearby road, we can help. Neighbouring places we cover for external mastic include Barton (1 mile south), Fairlee (1 mile north), Staplers (1 mile south-east), Hillgrove (1 mile north-east) and Whippingham (3 miles north). Larger places within reach include Ryde (5 miles east), Cowes (4 miles north), Sandown (6 miles south-east), Shanklin (7 miles south-east), Ventnor (8 miles south-east) and East Cowes (3 miles north). For island and remote addresses, the job takes a little more planning, so mention it when you ask for a quote.
Local landmarks in Cross Lane
Typical jobs here are in homes near Bargeman's Rest pub, Island Innovation VI Form Campus and Seaclose Park and the streets around them. Well-known places in the area include Carisbrooke Castle (1.7 miles south-west) and St Mary's Hospital (0.9 miles north-west). Green spaces nearby include Mill Hill and Briddlesford Nature Reserve.
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Housing providers, facilities teams and property managers book us too in Cross Lane and across the Isle of Wight. Several sites can go on one quote.
When something else is needed
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Damp from another source, such as a leaking gutter or a bridged damp-proof course
- Walls that need new movement joints cut into them
- Cracks in the bricks or render themselves, away from the joints
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly before booking.
Surfaces we seal
- Concrete & block
- Render & cladding joints
- Joints between brick and frames
- Brickwork movement joints
- Copings & trims
- Façade panels
FAQs for Cross Lane
Is Cross Lane in your area for external mastic?
Yes. Our work covers London and the South East, and Cross Lane is part of that. You can ring 0345 464 0079 or email us and tell us what needs doing.
What guarantee comes with external mastic in Cross Lane?
All our work, in Cross Lane and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
What is a movement joint?
Most straight vertical gaps in brickwork are movement joints. It gives the wall room to move and needs a flexible seal, not mortar.
How do you reach high-level joints?
It depends on the height and the site. Ground-floor joints are simple; for higher ones, send details and we will confirm the access.
What is backing rod for?
Closed-cell backing rod sets the depth of the sealant and stops it sticking to the back of the joint. That way it bonds to the two sides only and can stretch.
Where are you based?
We are based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Will the new joint stand out?
We aim for a joint that suits the wall rather than one that jumps out. Colour is agreed with you before we begin.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.