Isle of Wight · England
Cross Lane Regrouting
Problem with your tiled areas in Cross Lane? We remove the old material, prepare the joints and seal them properly.
- Grout that stays dark however much it’s cleaned
- Cracked grout along the bath or tray
- Gaps where the shower grout has gone
Regrouting for homes and businesses in Cross Lane
We take the old grout out to a consistent depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. We work on bathroom floors, shower walls and kitchen splashbacks, and common reasons people get in touch are cracked grout along the bath or tray and kitchen splashback grout stained by grease.
Homes around Cross Lane range from older cottages to more recent houses. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Cross Lane (PO30, PO31, PO41)
- Region
- Isle of Wight
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Do you need regrouting in Cross Lane?
Soap scum and limescale build up on grout and stick to it. In time the grout under it darkens and breaks down, and at that point, new grout is the better answer.
If you can see any of these, it’s time to have the joints looked at:
- Floor grout that will not come clean
- Grout that makes sound tiles look old
- Grout in corners that has cracked
- A grout colour that no longer suits the room
Managing a site like Summerfields Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Comparing quotes
- Who does the work, and how experienced they are
- What the quote includes, VAT included or not
- Whether they’re fully insured
- What the cure time is
Other services in Cross Lane
Why deal with it now?
Once grout cracks, water can get behind the tiling. Left alone, that water can loosen tiles or damage the wall, and then you’re looking at retiling. Sorting it early keeps the job simple. In an older home around Cross Lane, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or email us.
Why Cross Lane customers choose us
- Arbo and Everbuild products
- An ARBOMaster approved applicator
- Every job guaranteed for a year
- We are fully insured
Take a look at our cost guide and customer reviews.
How the job changes by surface
Bathroom wall tiles
Tiles away from the shower stay drier but grout there still discolours. New grout freshens them up.
Wet rooms
Regrouting a wet room helps keep water on the surface of the tiles. It does not repair failed tanking underneath.
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Regrouting in Cross Lane: local notes
Cross Lane has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around St Paul's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Cross Lane is about 1 mile north-east of Newport, in the Isle of Wight. Wherever you are in the PO30 postcode area, our applicators can take on regrouting. Across the Isle of Wight, we cover 125 places, and Cross Lane is one of them. For nearby work, see our Portsmouth page (12 miles or so).
Postcode districts we cover here for regrouting: PO30, PO31 and PO41. Whether your property is on Ash Road, Chain Lane and Beech Road or anywhere close by, our applicators can take on the job. If you are just outside Cross Lane, we cover Barton (1 mile south), Fairlee (1 mile north), Staplers (1 mile south-east), Hillgrove (1 mile north-east) and Whippingham (3 miles north). We also work in nearby towns such as Ryde (5 miles east), Cowes (4 miles north), Sandown (6 miles south-east), Shanklin (7 miles south-east), Ventnor (8 miles south-east) and East Cowes (3 miles north). If you are somewhere remote, a little more planning is needed.
Near you in Cross Lane
Locally, jobs take us to homes and businesses close to Bargeman's Rest pub, Island Innovation VI Form Campus and Seaclose Park, among other places. Well-known places in the area include Carisbrooke Castle (1.7 miles south-west) and St Mary's Hospital (0.9 miles north-west). Green spaces nearby include Mill Hill and Briddlesford Nature Reserve.
Common questions in Cross Lane
Is Cross Lane within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you cover Cross Lane for regrouting?
Yes, Cross Lane is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job, and we will send you a clear quote.
Will the old sealant be removed?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
How long should I wait before showering?
You will get a clear time from us before we go. The grout and sealant both need to cure before they get wet.
How long does the job take?
Typically it takes a few hours, or longer for a fully tiled room. Bigger jobs take longer, and we will say how long yours will take.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we’ll tell you what we’re using.
Could my grout be a different colour after regrouting?
Yes. Many customers do. A darker grout hides marks better and lighter grout gives a fresher look.
Are you an approved applicator?
Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
What sealant work can’t fix
To be straight with you, there are a few things sealant will not fix:
- Loose tiles, which need refixing first
- Cracked or broken tiles
- Waterproofing that has failed below the tiling
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Joints and surfaces we work on
- Bathroom floors
- Tiled floors
- Kitchen splashbacks
- Wet rooms
- Shower walls
- Bathroom wall tiles
What affects the quote in Cross Lane
There’s no set price list. The quote depends on:
- Mould in or behind the old joints
- Whether old sealant or filler has to be cut out
- The number of rooms or windows
- The product the joint needs
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Helping us quote
When you contact us, these details help:
- Whether it has been sealed before
- A few photos by email, if you can
- The address or postcode of the job
- Any access issues, like height or stairs
If you’re in Cross Lane and need regrouting, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before any work starts.
What we do, step by step
Every visit runs the same way: we check the joints, protect the area around them, carry out the job and tidy away. It normally takes anything from a few hours to a full day, depending on the area. Parking around Cross Lane is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We start by checking the tiles for any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- The joints are vacuumed and cleaned.
- New grout is worked into the joints and cleaned off the tile faces.
- Corners and edges are resealed with flexible silicone, not grout.
Getting ready for the visit
- Clear the area around the work
- For business premises, tell us about site rules or sign-in
- Mention any leaks or damp you’ve noticed
Getting a quote
We do not publish a price list. Instead, we give you a clear price for your job. To get started, call 0345 464 0079 or drop us an email.