Kent · England
Bathroom & kitchen resealing in Potters Corner, Kent
Problem with your baths, showers and worktops in Potters Corner? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Splits where the tray meets the wall
- Lumpy, uneven sealant from a DIY attempt
- Cracked, shrunken or lifting silicone
Bathroom resealing in Potters Corner, done properly
Kitchens need the same care as bathrooms. Worktop upstands, sink edges and splashback joints all take splashes every day, and water behind a laminate worktop can make it swell. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. Typical jobs include black mould in the silicone that won’t clean off and a joint torn by a bath that flexes, across basins & vanity units, kitchen worktops & upstands and wet rooms.
For a small place like Potters Corner, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Each job carries a 12-month guarantee, large or small.
- Where
- Potters Corner (TN25, TN26)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What sealant work cannot fix
Some problems need a builder, plumber or other trade rather than us:
- Water getting in through the grout rather than the sealant
- Water coming from the plumbing rather than the joint
- A tray that rocks until it’s re-bedded
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.
Surfaces we seal
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Baths
- Kitchen worktops & upstands
- Sinks & splashbacks
Aftercare tips
Aftercare is simple:
- Dry worktop joints after washing up
- Never pick at the silicone with a blade
- Don’t let bottles sit on the bead
- Stick to a soft cloth and a mild cleaner
Don’t stand bottles along the bead, because they trap water against the silicone. Squeegeeing the walls and tray after use helps the joint dry.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out. Catching it early keeps it a simple reseal.
Surface by surface
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. We renew it in clear, white or a matched colour.
Basins & vanity units
The back of a basin gets wet every time someone washes. Old sealant there often goes black at the corners, and we treat it exactly as we would a bath.
Places near Potters Corner
Also in Potters Corner
What bathroom resealing looks like in Potters Corner
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Schools such as Goat Lees Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. If you let a flat or house near Ashford International station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Potters Corner is about 2 miles north of Ashford, in Kent. Every kind of property in Potters Corner can book us for bathroom resealing. Every job comes with our one-year guarantee. Our area takes in 922 places across Kent. Our Chelmsford page covers work nearby (42 miles or so).
Work in TN25 and TN26 is quoted and booked the same way as anywhere else. You’ll find streets such as Kingsland Lane, Sandyhurst Lane and Westwell Lane, all of which we cover. Other places close to Potters Corner include Bockhanger (1 mile south-east), Godinton (1 mile south), Westwell (1 mile north), Hothfield (1 mile west) and Kennington (1 mile east). Within a short drive, we also cover Canterbury (12 miles north-east), Sittingbourne (13 miles north-west), Folkestone (15 miles south-east), Whitstable (15 miles north-east), Faversham (10 miles north) and Hythe (12 miles south-east).
Landmarks near Potters Corner
In Potters Corner, that means homes and buildings near Ashford Warren and Hoads Wood, Towers School and Sixth Form Centre and The Hayesbrook School. Potters Corner’s nearest station is Ashford International station, roughly 2.2 miles south-east of the centre. Well-known places in the area include County Square (1.8 miles south-east) and William Harvey Hospital (3.4 miles south-east). The countryside around Potters Corner includes Hatch Park.
What we do, step by step
All our tools and materials come with us in the van, so there’s nothing for you to buy. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes a morning or an afternoon for most single baths and showers. In a small place like Potters Corner, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We clear away and tell you when it can get wet, normally after around 24 hours.
Before we arrive
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
- Mention if the joints have been sealed before
How to get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you are ready, phone 0345 464 0079 or email us.
Read more
What affects the cost of bathroom resealing
We quote each job individually. This is what makes a difference:
- How easy the joints are to reach
- The number of rooms or windows
- Working hours on commercial sites
- Mould in or behind the old joints
Doing several joints on one visit is generally more efficient than separate visits. You’ll get one clear quote for the whole job.
Asking for a quote
Photos help, but a description is a good start. Try to tell us:
- Roughly how big the job is
- Where the property is
- The problem you’ve noticed
- A few photos by email, if you can
We quote each job on its own, so the first step is telling us about yours. Simply phone 0345 464 0079 or email us and describe the job.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too in Potters Corner and across Kent. Several sites can go on one quote, and we’re fully insured for the work.
In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
Potters Corner: your questions answered
Will you come out to Potters Corner?
Yes, Potters Corner is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Ashford International station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
When can I use the bath or shower again?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or as long as we advise for that product.
Do I have to be there?
It depends on the job. For work indoors, someone needs to let us in, and for outside work we will agree access with you when we book.
Are you fully insured?
Yes. We’re fully insured, and we can confirm the details when we quote.
How long does a bath or shower reseal take?
It depends on how many joints there are and how much old sealant has to come out. Allow a couple of hours for a typical bath or shower.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
My sealant has gone black. Can you sort it?
Yes. Once mould has grown into the silicone, it normally can’t be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.