Kent · England
Bathroom & kitchen resealing in Oversland, Kent
Bath, shower, basin, wet room, worktop and sink resealing in Oversland, with a 12-month guarantee on every job. Call for a quick quote.
- Failed sealant on the screen profile
- Mouldy sealant that has gone black
- Shrunken sealant along the back of a worktop
Bathroom resealing for homes and businesses in Oversland
Sealant that is mouldy, cracked or peeling is worth sorting before it lets water through. A photo of the joints helps when you ring 0345 464 0079 or send us an email, and we will send you a clear quote for bathroom resealing in Oversland. We work on wet rooms, basins & vanity units and shower trays & enclosures, and the jobs we see most are new sealant laid over old sealant that is now lifting and splits where the tray meets the wall.
In a village or hamlet like Oversland, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
All our work is covered by our 12-month guarantee, wherever you are in Kent.
- Place
- Oversland (ME13)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Common problems we fix in Oversland
Silicone needs a clean, dry surface without any grease to stick to. Soap residue, oils and leftover silicone film all get in the way, and a joint that looked fine soon begins to come away.
The problems people usually mention when they call include:
- Water getting behind the kitchen upstand
- Black spots spreading through the bead
- A messy, uneven bead from a previous reseal
- A joint torn by a bath that flexes
Rented homes near Selling station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Questions to ask before you book
- Are they insured?
- Whether they seal over old material or remove it
- Which sealant they’ll use, and why
- How long to leave it before use
How to look after the new joints
Aftercare is simple:
- Give the silicone its full cure time
- Keep bottles off the sealant line
- Stick to a soft cloth and a mild cleaner
- Do not leave water standing on kitchen joints
Give the silicone time to cure before it gets wet, which is normally around 24 hours. Once it’s cured, wiping it down after use keeps it looking new.
A failed kitchen joint is easy to miss. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. Resealing before that happens protects the worktop.
What happens on the day
When we arrive, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before any work begins. The work normally takes a couple of hours for a single bath or shower. In a small place like Oversland, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, generally around 24 hours.
Preparing for the visit
- Mention any tricky access
- Plan for the work area to be out of bounds to pets and children
- Clear items away from the joints we are working on
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved.
Advice
Questions from Oversland
I let a flat near Selling station. Can you help?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can be quoted together. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Will you come out to Oversland?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Is it messy?
We keep the work tidy. We protect what’s around the joints, and we clear up when we’re done.
Do you hold any approvals?
Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Can you reseal around my kitchen sink and worktop?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
Is the work guaranteed?
Yes, a 12-month guarantee. Good ventilation and gentle cleaning help it last.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Why it’s worth doing now in Oversland
Sorting it now is quick: the work takes around two hours for one bath or shower, longer for a whole bathroom. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Around Oversland, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, phone 0345 464 0079 or email us and we’ll give you an honest view and a quote.
What you get with us
- We agree the colour with you first
- A choice of colours where the product allows
- Trusted Arbo and Everbuild sealants
- Colour picked to suit the job
Bathrooms and kitchens in Oversland
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as Church of St Peter and St Paul, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Managing a site like Boughton-under-Blean and Dunkirk Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Oversland is about 4 miles south-east of Faversham, in Kent. If you need bathroom resealing in Oversland, please call 0345 464 0079 or drop us an email for a quick quote. We cover Kent from our Crawley base, Oversland included. Oversland is one of 922 places in Kent we cover. Our Chelmsford page covers work nearby.
We work across the ME13 postcode area for bathroom resealing and the streets around it. Whether your property is on Dunkirk Road and South Street or anywhere close by, our applicators can take on the job. Other places close to Oversland include Winterbourne (1 mile north-east), South Street (1 mile west), Hickmans Green (1 mile north), Neames Forstal (1 mile south-west) and Crouch (1 mile north-west). We also work in nearby towns such as Ashford (10 miles south), Canterbury (5 miles east), Sittingbourne (10 miles north-west), Whitstable (6 miles north-east), Faversham (4 miles north-west) and Herne Bay (10 miles north-east).
Near you in Oversland
We work in homes and buildings around Mount Ephraim Gardens and The Sondes Arms and the streets around them. The closest station to Oversland is Selling station, roughly 0.6 miles west of the centre. A little further out are Eastbridge Hospital of St Thomas the Martyr (5.3 miles east) and Tower keep castle at Chilham (2.6 miles south). Not far away are Blean Woods RSPB Reserve.
What the job involves on each surface
Sinks & splashbacks
Next to the sink, the sealant has to cope with constant water, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They’re resealed with anti-fungal sanitary silicone, and our work is on the visible joints only.
Also near Oversland
Other services in Oversland
Landlords, agents and businesses in Oversland
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.
What we cannot put right
To be straight with you, some problems need a different trade:
- A tray that rocks until it’s re-bedded
- Cracked or missing grout between tiles (that is regrouting)
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If you are not sure, just ring 0345 464 0079 or email us and we’ll give you a straight answer.
What we seal
- Shower trays & enclosures
- Sinks & splashbacks
- Baths
- Kitchen worktops & upstands
- Basins & vanity units
- Wet rooms