Kent · England
Oversland New Build Mastic
New-build sealant joints in Oversland need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Joints pulling apart as timber shrinks
- Shower seals failing in the first year or two
- Beads laid onto grit and dust from the build
New build mastic in Oversland, done properly
We work in new homes and on new-build sites across Oversland. Whether it’s one en suite or a run of plots, the method is the same: remove, clean, prime where needed, then a neat new bead. We are often asked to deal with smeared, uneven beads picked up at snagging and gaps opening as the house dries out and settles, on skirting & floors, kitchens and show homes.
In a village or hamlet like Oversland, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
Your job is guaranteed for a year, as with all our work.
- Where
- Oversland (ME13)
- Region
- Kent
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Joints and finishes in Oversland homes
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For new homes near Selling station, it’s worth checking the sealant early, while snags are still fresh.
Oversland is about 4 miles south-east of Faversham, in Kent. Homes, rented property, offices and hotels in Oversland is covered for new build mastic, old or new, large or small. Every job comes with our one-year guarantee. Oversland is one of 922 places in Kent where we work. We also work in Chelmsford, around 37 miles away.
We work across ME13 for new build mastic. You’ll find streets such as Dunkirk Road and South Street, and we cover them all. We also cover the places around Oversland: Winterbourne (1 mile north-east), South Street (1 mile west), Hickmans Green (1 mile north), Neames Forstal (1 mile south-west) and Crouch (1 mile north-west). We also work in nearby towns such as Ashford (10 miles south), Canterbury (5 miles east), Sittingbourne (10 miles north-west), Whitstable (6 miles north-east), Faversham (4 miles north-west) and Herne Bay (10 miles north-east).
Around Oversland
We work in homes and buildings around Mount Ephraim Gardens and The Sondes Arms. For rail, the closest station is Selling station, about 0.6 miles west. Well-known places in the area include Eastbridge Hospital of St Thomas the Martyr (5.3 miles east) and Tower keep castle at Chilham (2.6 miles south). Not far away are Blean Woods RSPB Reserve.
Towns and villages near Oversland
More services for Oversland
What we are called out for in Oversland
New homes are full of moisture from plaster, screed and concrete, and it dries out over the first couple of years. As it does, timber shrinks and joints open.
Keep an eye out for any of the following:
- Plot mastic for developers ahead of handover
- Untidy sealant flagged on a snagging list
- Cracked sealant around new window and door frames
- Gaps between new skirting and floors
Around Oversland, as everywhere, new build mastic is only as good as the preparation behind it.
What your quote should include
- What insurance they hold
- What the quote includes, VAT included or not
- How long to leave it before use
- How the joint is cleaned and prepared
How it works
There’s no need to move everything out, only the area right around the joints. Everything nearby is protected, and the work takes a few hours for most snagging lists, longer for a run of plots in most cases. Somewhere like Oversland needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We look at why each joint failed, including any movement.
- We remove the failed sealant and clean the joints.
- Joints are dried and primed where the product calls for it.
- New sealant goes in, with baths filled first so they’re at their heaviest.
- The finished joints are checked and the cure times given.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Tell us if parking is tricky
- On commercial sites, let us know about site rules
Getting a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Read more
Different surfaces, different methods
Skirting and floors
Where the floor meets a bath panel or kitchen plinth, the joint keeps mop water out. They get a flexible, water-resistant sealant.
Show homes
We seal show-home bathrooms, kitchens and frames ready for viewings. We’ll plan around viewing times.
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- Photograph failed sealant before it’s redone
- Check bath and shower seals every few months as the house settles
- Open a window or run the fan after bathing
- Resist patching a failed seal with a tube from the DIY shop
Clean the sealant with a mild detergent and a soft cloth. Keep scourers and harsh chemicals off it as they wear the bead.
Don’t let the snagging period run out with sealant problems unreported. After that, putting it right may fall to you.
Landlords, agents and businesses in Oversland
Hotels need rooms back in use, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Oversland questions
Do you cover smaller places like Oversland?
Yes. Oversland is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is Oversland in your area for new build mastic?
Yes. We work across London and the South East, and Oversland is part of that. You can ring 0345 464 0079 or email us and tell us what needs doing.
Do you work through snagging lists?
Yes. Send the list and a few photos of the sealant items and we’ll give you a quote. We will flag anything that needs another trade.
Can new sealant go on top of the old bead?
No. Sealing over old sealant looks fine for a few weeks, then lifts. All the old sealant comes out before we start.
My new home is still under warranty. Should I contact you?
If you are still within the builder’s snagging or warranty period, report it to them first. If they’re slow or the fix doesn’t last, we can help.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
Can you quote for more than one area?
Yes, and it often makes sense. Doing several areas at once is usually more efficient.
How long does the job take?
Typically it takes anything from a few hours to several days, depending on the number of plots. Larger jobs naturally take longer, and we will tell you how long to expect.
When something else is needed
It helps to know what we cannot do:
- A tray or bath that isn’t properly supported, until it’s fixed
- Deciding who is responsible under a builder’s warranty
- Damaged fittings that need replacing
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly.
Joints and surfaces we work on
- Kitchens
- Bathrooms & en suites
- Windows & doors
- Show homes
- Skirting & floors
- Plot handovers