Kent · England

Gutter, fascia & soffit sealing in Oversland, Kent

Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for householders, landlords and businesses in Oversland. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Old gutter sealant that has let go
  • Drips from gutter joints and end caps
  • Old sealant on roofline trims that has split

Book gutter sealing in Oversland

How we quote for gutter sealing

Every job gets its own quote. These are the things that affect it:

  • Whether old sealant or filler has to be cut out
  • The amount of work
  • How many rooms, windows or areas are involved
  • Working hours on commercial sites

What it costs depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts.

What to tell us for a quote

Photos help, but a description is a good start. Try to tell us:

  • A few photos by email, if you can
  • Whether it has been sealed before
  • How many joints, rooms or windows are involved
  • What’s wrong with the joints now

Want a quote for gutter sealing? Please phone 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.

How we handle gutter sealing in Oversland

We seal leaking gutter joints, end caps, fascia and soffit joints, along with roofline trims and garage door frames. It’s joint work, not replacing the gutter. If you have trim joints where the sealant has failed and quick sealant fixes on gutters that didn’t last, we can put it right.

Somewhere as small as Oversland, homes and farm buildings often face open ground, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.

Each job carries a 12-month guarantee.

Place
Oversland (ME13)
Region
Kent
Guarantee
12 months on all our work
Price
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

What sealant work can’t fix

We will not take on work that won’t last, so these are the limits:

  • Downpipes that are blocked or broken
  • Cracked, split or warped gutter sections
  • Roof leaks, slipped tiles or failed flashing (a roofer’s job)

Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly before you book.

What we seal

  • uPVC fascias
  • Garage door frames
  • Soffit joints
  • Gutter joints
  • Roofline trims
  • Gutter end caps

What gutter sealing looks like in Oversland

London and the South East are among the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. With historic houses such as Belmont House and Gardens (about 4.8 miles west) nearby, there’s older building stock in the area around Oversland as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.

Managing a site like Boughton-under-Blean and Dunkirk Primary School? Then larger buildings have long runs of movement joint that eventually need resealing. For an older house near a landmark such as Church of St Peter and St Paul, an extension built onto an older house moves differently, and the joint between them takes the strain. Rented homes near Selling station change hands often, and a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.

Oversland is about 4 miles south-east of Faversham, in Kent. For gutter sealing in and around Oversland, it’s easy to get a quote: please ring 0345 464 0079 or email us. We are based in Crawley and cover Kent. Our Kent coverage runs to 922 places, Oversland among them. We also work in Chelmsford, about 37 miles from Oversland.

All of ME13 is covered for gutter sealing, from the main roads to the quietest streets. Gutter sealing is available to properties on Dunkirk Road and South Street and the roads around them. We also cover Winterbourne (1 mile north-east), South Street (1 mile west), Hickmans Green (1 mile north), Neames Forstal (1 mile south-west) and Crouch (1 mile north-west). Larger places within reach include Ashford (10 miles south), Canterbury (5 miles east), Sittingbourne (10 miles north-west), Whitstable (6 miles north-east), Faversham (4 miles north-west) and Herne Bay (10 miles north-east).

Landmarks near Oversland

Around Oversland, our work takes us to homes and buildings near Mount Ephraim Gardens and The Sondes Arms. The closest station to Oversland is Selling station, roughly 0.6 miles west. Nearby you’ll also find Eastbridge Hospital of St Thomas the Martyr (5.3 miles east) and Tower keep castle at Chilham (2.6 miles south). Open spaces near Oversland include Blean Woods RSPB Reserve.

Map of Oversland © OpenStreetMap contributors

The process

Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it normally takes an hour or two for a few joints, longer for a full run. Somewhere as small as Oversland, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We find where the water is coming from and check the gutter is sound.
  2. We remove the old sealant and clean the joint.
  3. We dry the joint so the new sealant can bond.
  4. A gutter sealant is applied to the joint.
  5. We check the run and clear debris near the joints.

Before we arrive

  • Mention any tricky access
  • Let us know about parking restrictions
  • Clear items away from the joints we are working on

Ask for a quote

Every job is quoted individually, so start by telling us what you need. Simply call 0345 464 0079 or drop us an email and describe the job and send pictures if you have them.

Get a quick quote

Advice

How to look after the new joints

No joint lasts for ever, but care makes a real difference. Our tips:

  • Look for streaks or damp on the wall below gutters
  • Look along the fascias for open joints
  • Sort out a dripping joint early
  • Keep downpipes clear

Leave the new sealant to cure as we advise and avoid disturbing it.

A drip from a gutter joint won’t stop on its own. The same spot gets soaked every time it rains and that can cause damp inside.

Landlord and commercial work in Oversland

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.

We also work for property managers and facilities teams. We can quote a run of properties together.

Should I try it myself first?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

Common questions in Oversland

Can you do gutter sealing in Oversland?

Yes. Our work covers London and the South East, and Oversland is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear price.

Can you help a landlord with a rental near Selling station?

Yes. We work for landlords and agents as well as householders. Just phone 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.

Do you replace gutters or fascias?

No. We seal leaking joints, end caps and trims. A gutter installer or roofer deals with replacement.

Do you remove the old sealant?

Yes, every time. New silicone does not stick to old silicone, so the joint is cleaned back first.

Is it OK to seal over old sealant?

No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.

Will sealing fix a sagging gutter?

Not for long. The joint will pull apart, so the fall and brackets need sorting first.

When is the sealant fully cured?

It depends on the product and the conditions. Before we leave, we will tell you the cure time.

Are you ARBOMaster approved?

Yes. Mr Mastic is an ARBOMaster approved applicator.

Why it’s worth doing now in Oversland

Replacing guttering is a much bigger job than sealing joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it’s broken or sagging, a gutter installer needs to look. Around Oversland, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.

Why choose Mr Mastic in Oversland

  • Colour agreed with you before work begins
  • 4.9 on Google from 180+ five-star reviews
  • Fully insured
  • An ARBOMaster approved applicator

Read our cost guide or what customers say.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job