Kent · England
Martin Mill Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing in Martin Mill, with a 12-month guarantee on every job. Call for a quick quote.
- Gaps between the worktop and the wall
- Sealant that has split, shrunk or peeled away
- New sealant laid over old sealant that is now lifting
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Let new sealant cure fully before it gets wet
- Dry the bead with a towel now and then
- Open a window or run the fan so the room dries
- Don’t leave water standing on kitchen joints
Keep bottles and razors off the sealant line, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. Any of these means the joint needs attention.
Bathroom resealing in Martin Mill, done properly
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Martin Mill. We are ARBOMaster approved and fully insured, and every job carries our 12-month guarantee. Common call-outs are for splits where the tray meets the wall and damp behind the bath or under the tray, on wet rooms, baths and basins & vanity units.
In a village or hamlet like Martin Mill, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
A one-year guarantee comes as standard.
- Location
- Martin Mill (CT15)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear price before work begins
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Nearby places to Martin Mill
Also in Martin Mill
How the job changes by surface
Baths
Acrylic baths give a little under load, while steel and cast iron baths move less but still settle when full. Loading the bath with water before sealing allows for it.
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
What affects the cost of bathroom resealing
Every job gets its own quote. These are the things that affect it:
- Any working-time requirements on site
- The old material and how stubborn it is
- The type of sealant required
- Access and height
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Helping us quote
Photos help, but a description is a good start. Please mention:
- The type of property
- Roughly how big the job is
- Access, such as stairs, a lift or height
- Where the job is, and your postcode
Want a quote for bathroom resealing? Please call 0345 464 0079 or send us an email with a few details. We will explain what we’d do and give you a clear quote before we start.
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
If you manage several properties in or around Martin Mill, several properties can go on one quote. Send us the addresses and the work at each, and photos by email help.
How the visit works
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes two to three hours for a typical bath, depending on how much old sealant there is. For a village or hamlet like Martin Mill, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Before we arrive
- For business premises, tell us about site rules or sign-in
- Clear items away from the joints we’re working on
- Tell us about any previous sealing or DIY attempts
Getting a quote
We quote each job on its own, so the first step is telling us about yours. Simply call 0345 464 0079 or email us and describe the job and send photos if you have them.
Read more
Do you need bathroom resealing in Martin Mill?
Mould is the reason many people want their sealant replaced. Bathrooms without good ventilation keep the silicone damp for hours, and once it has grown into the bead, cleaning rarely gets it out.
The problems people generally mention when they call are:
- Leaks into the floor or ceiling below
- Smears of silicone across the tiles
- Cracked, shrunken or lifting silicone
- New sealant laid over old sealant that is now lifting
Schools such as Langdon Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before booking
- How the surfaces are prepared before sealing
- What the cure time is
- What product goes in the joint
- Is VAT in the price?
Common questions in Martin Mill
Do you work for landlords with property near Martin Mill station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Will you come out to Martin Mill?
Yes, Martin Mill is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or as long as we advise for that product.
How long does it take to reseal a bath or shower?
It depends on how many joints there are and how much old sealant has to come out. For most single baths or showers, allow a couple of hours.
Can you quote for more than one area?
Yes. Just list everything you need and you will get one quote.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access.
Where do you work from?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Martin Mill homes and their sealant
Martin Mill is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St Augustine, walls and floors in older homes can move, and sealant and grout show it first. Rented homes near Martin Mill station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Martin Mill is about 3 miles north-east of Dover, in Kent. Martin Mill gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our Kent coverage runs to 922 places, and Martin Mill is one of them. There’s also a page for Chelmsford, roughly 54 miles from Martin Mill.
Our applicators cover all of CT15 for bathroom resealing. Whether your property is on Station Road, Barley Close and Lucerne Lane or anywhere close by, we can help. Other places close to Martin Mill include Martin (1 mile north-west), East Langdon (1 mile west), West Cliffe (1 mile south), West Langdon (1 mile north-west) and Ringwould (1 mile north-east). Within a short drive, we also cover Canterbury (14 miles north-west), Margate (15 miles north), Dover (3 miles south-west), Folkestone (10 miles south-west), Ramsgate (12 miles north) and Broadstairs (14 miles north).
Landmarks near Martin Mill
Around Martin Mill, our work takes us to homes and buildings near Duke of York's Royal Military School and The Lantern Inn, among other places. There’s a railway station in Martin Mill itself: Martin Mill station. A little further out are Royal Victoria Hospital (3.4 miles south-west) and Dover Castle (3.1 miles south). The countryside around Martin Mill includes Dover Western Heights.
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.