Kent · England
Bathroom & kitchen resealing in Martin, Kent
Bathroom resealing for Martin, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Lumpy, uneven sealant from a DIY attempt
- Two layers of silicone, both failing
- Splits where the tray meets the wall
About our bathroom resealing in Martin
Showers work their sealant harder than baths. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. They’re resealed with anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. We work on wet rooms, sinks & splashbacks and basins & vanity units, and people most often call us about leaking joints on a shower screen and a messy, uneven bead from a previous reseal.
Being in a small place like Martin makes no difference to the job itself: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Place
- Martin (CT15)
- Wider area
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How to look after the new joints
Aftercare is simple:
- Run the extractor fan during and after every shower
- Move toiletries away from the joint
- Give the silicone its full cure time
- Check the joints every few months for splits or lifting
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning usually will not remove it. Catching it early keeps it a simple reseal.
What we can’t put right
It helps to know what we cannot do too:
- A bath or tray that moves because it isn’t properly supported
- Cracks in the tray itself rather than the joint
- Failed grout lines across the wall
If you are not sure, just ring 0345 464 0079 or email us and we will give you a straight answer before booking.
Joints and surfaces we work on
- Basins & vanity units
- Sinks & splashbacks
- Kitchen worktops & upstands
- Shower trays & enclosures
- Wet rooms
- Baths
Common questions in Martin
Can you do bathroom resealing in Martin?
Yes. We work across London and the South East, and Martin is part of that. You can phone 0345 464 0079 or email us and let us know what needs doing.
I let a flat near Martin Mill station. Can you help?
Yes, we work for landlords and letting agents. Just call 0345 464 0079 or send us an email and tell us about the property, and we will send you a clear quote.
What should I tell you?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply phone 0345 464 0079 or send us an email.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we are done.
How long does the new silicone need before I use the shower?
Usually after around 24 hours. We’ll tell you the cure time for the product we used.
Can I add another job to the visit?
Yes, we can. More than one area can go on one quote.
Do you do commercial work?
Yes. We’ve worked for hotels, offices and other businesses.
Where are you based?
We are based in Crawley, and we cover South East England, London and all of Scotland.
When to call us in Martin
With age, silicone loses its stretch. Along worktops it tends to pull back from the wall, opening a hairline gap that lets water and crumbs in. Hot pans and harsh cleaners don’t help.
Any of these means the joints need attention:
- Mouldy sealant that has gone black
- Water getting behind the bath panel
- Sealant that has split, shrunk or peeled away
- A messy, uneven bead from a previous reseal
Schools such as Langdon Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before booking
- Who does the work, and how experienced they are
- Whether VAT is included
- The length of the guarantee
- How the surfaces are prepared before sealing
Martin homes and their sealant
Martin is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
If you let a flat or house near Martin Mill station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. If you live in an older home near Church of St Augustine, walls and floors in older homes can move, and sealant and grout show it first.
Martin is about 3 miles north-east of Dover, in Kent. Martin gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Our area takes in 922 places across Kent, large and small. We also work in Chelmsford, around 54 miles away.
Every address in CT15 is within our area for bathroom resealing. Whether your property is on The Street, Waterworks Lane and Ringwould Road or a nearby road, our applicators can take on the job. We also cover Martin Mill (1 mile south-east), East Langdon (1 mile south-west), West Langdon (1 mile west), Ringwould (1 mile north-east) and Sutton (1 mile north). Further out, we also cover Canterbury (13 miles north-west), Margate (14 miles north), Dover (3 miles south-west), Folkestone (10 miles south-west), Ramsgate (12 miles north) and Broadstairs (13 miles north).
Near you in Martin
Locally, jobs take us to homes and businesses close to The Lantern Inn and Duke of York's Royal Military School, among other places. There’s a railway station in Martin itself: Martin Mill station. Well-known places in the area include Royal Victoria Hospital (3.6 miles south-west) and St Margaret's Museum (2.5 miles south-east). Green spaces nearby include Dover Western Heights.
Landlords, agents and businesses in Martin
If you manage several properties in or around Martin, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
We work for landlords and letting agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
Towns and villages near Martin
Also in Martin
Different surfaces, different methods
Wet rooms
Wet room floors move slightly as they’re used, so the internal corners need silicone rather than grout. Cracked grout in a corner can be cut out and replaced with silicone.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Old sealant there often goes black at the corners, so it’s cut out and renewed just like a bath joint.
The process
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes two to three hours for a typical bath, depending on how much old sealant there is. In a small place like Martin, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We protect the area and cut out all of the old sealant.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Preparing for the visit
- Keep children and pets away from the work area
- Mention if the joints have been sealed before
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Read more
What affects the quote in Martin
We don’t publish a price list, because jobs vary so much. What we look at:
- Which sealant suits the joint
- Working hours on commercial sites
- How much there is to do
- How many areas need sealing
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, call 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
What we need to know
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Any previous sealing or DIY work
- Where the property is
- Whether it’s a home or a business
- Photos by email, if that is easy
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear price for your job. To get started, call 0345 464 0079 or drop us an email.