Kent · England
Bathroom & kitchen resealing in Kingston, Kent
Our applicators work in Kingston on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly.
- A bead that has pulled away from the tiles
- Leaking joints on a shower screen
- Black mould in the silicone that won’t clean off
How we handle bathroom resealing in Kingston
It isn’t only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water behind a laminate worktop can make it swell. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. We work on sinks & splashbacks, wet rooms and baths, and the jobs we see most are lumpy, uneven sealant from a DIY attempt and leaks into the floor or ceiling below.
Around Kingston, it’s houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
A 12-month guarantee comes as standard, so you’re covered after we have gone.
- Location
- Kingston (CT4)
- Wider area
- Kent
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Signs you need bathroom resealing in Kingston
Plenty of failed sealant has been laid over the top of older sealant. New silicone will not bond to old silicone, so it peels, leaks and hides mould behind it.
Look out for any of the following:
- Cracked, shrunken or lifting silicone
- Water getting behind the kitchen upstand
- Water escaping at the shower enclosure
- A reseal done over the top of the old bead
In the older streets around Church of St Giles, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Questions to ask before you book
- When the joint can take water or movement
- Which sealant they’ll use, and why
- Whether all the old sealant comes out first
- How the joint is cleaned and prepared
Towns and villages near Kingston
Other services in Kingston
Common questions in Kingston
Can you do bathroom resealing in Kingston?
Yes. We work across London and the South East, and Kingston is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we’ll give you a clear quote.
I let a flat near Adisham station. Can you help?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear quote.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Do the sealants smell?
Possibly a little. It fades as the sealant cures.
Is it worth trying it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Can you work on commercial sites?
Yes. We have worked for hotels, offices and other businesses.
Does the resealing come with a guarantee?
Yes, a one-year guarantee. Good ventilation and gentle cleaning help it last.
Can you get rid of the black mould in my sealant?
Yes, we can. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Never pick at the silicone with a blade
- Do not let bottles sit on the bead
- Keep an eye on the corners, where splits start
- Run the extractor fan during and after every shower
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out. Catching it early keeps it a simple reseal.
What affects the cost of bathroom resealing
Jobs vary more than people expect. What affects the quote:
- Working hours on commercial sites
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
- Which sealant suits the joint
What you pay reflects the work, not guesswork. That’s why we ask about the job first and send you a clear quote before any work starts.
What we need to know
What to tell us when you ask for a quote:
- Pictures of the joints, sent by email
- Any access issues, like height or stairs
- Any previous sealing or DIY work
- Where the job is, and your postcode
We quote each job on its own, so start by telling us what you need. Simply call 0345 464 0079 or drop us an email and describe the job.
Work for landlords, hotels and businesses
If you manage several properties in or around Kingston, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Bathroom resealing in Kingston: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Adisham station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. Managing a site like Barham Church of England Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Kingston is about 5 miles south-east of Canterbury, in Kent. Across the CT4 area, we can carry out bathroom resealing at your property. We cover 922 towns and villages across Kent, from the larger towns to small villages. We also work in Chelmsford, about 46 miles from Kingston.
Our applicators cover all of CT4 for bathroom resealing and the streets around it. Bathroom resealing is available to properties on The Street, Church Lane and Covet Lane and the roads around them. We also cover Out Elmstead (1 mile south-east), Barham (1 mile south-east), Marley (1 mile south-west), Bishopsbourne (1 mile north-west) and Derringstone (1 mile south). Within a short drive, we also cover Ashford (13 miles south-west), Canterbury (5 miles north-west), Margate (15 miles north-east), Dover (9 miles south-east), Folkestone (9 miles south) and Ramsgate (14 miles north-east).
Local landmarks in Kingston
We work in homes and buildings around Black Robin Public House and Jumping Downs. The nearest railway station is Adisham station, roughly 2.7 miles north-east. Other landmarks nearby include Kent and Canterbury Hospital (4.2 miles north-west).
What sealant work cannot fix
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Cracked or missing grout between tiles (that is regrouting)
- A leaking waste, trap or valve
- Cracks in the tray itself rather than the joint
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think before booking.
What we seal
- Kitchen worktops & upstands
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Wet rooms
- Sinks & splashbacks
What we do, step by step
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. In a small place like Kingston, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Preparing for the visit
- Tell us about any water getting in
- Let us know about parking restrictions
- Clear items away from the joints we’re working on
Getting a quote
Need a quote? Please phone 0345 464 0079 or email us with a few details. We will explain what we’d do and give you a clear price before we start.
Advice
What happens if it’s left?
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Skip those steps and even the best silicone fails early. In a small place like Kingston, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- Anti-fungal silicone where joints get wet
- White, clear, grey or another colour, product permitting
- Sealant colour chosen to suit
- We leave the area clean and tidy
Read what affects the cost and our reviews.