Kent · England
Bathroom Resealing in Highstead
Specialist bathroom resealing for Highstead: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Damp behind the bath or under the tray
- Lumpy, uneven sealant from a DIY attempt
- Failed sealant on the screen profile
What happens on the day
On the day, we look over the joints with you first. We protect the surfaces around the joints before any work starts. The work normally takes a couple of hours for a single bath or shower. Somewhere like Highstead needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Mention any tricky access
- Keep pets and children clear of the area while we work
- Mention any parking rules near the property
How to get a quote
For bathroom resealing in Highstead, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before we start.
Advice
How we handle bathroom resealing in Highstead
Sealant is the soft line between a bath, shower or worktop and the wall. When it splits, shrinks or turns black, water gets behind it into walls, panels and floors. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. Typical jobs include water getting behind the kitchen upstand and leaks into the floor or ceiling below, on baths, sinks & splashbacks and kitchen worktops & upstands.
For a small place like Highstead, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
We stand behind the work with a one-year guarantee, so you are covered after we have gone.
- Where
- Highstead (CT3, CT6)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
DIY sealant or a professional job?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Common questions in Highstead
I let a flat near Herne Bay station. Can you help?
Yes. We work for landlords and agents as well as homeowners. You can call 0345 464 0079 or email us with the details for a clear quote.
Do you cover smaller places like Highstead?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you have insurance?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
What colours of sealant can you use?
There’s a choice: clear, white and colours chosen to suit the room. We will talk it through when we quote.
Will there be a smell?
Some sealants have a smell while they cure, but it fades. Opening a window helps.
How long will the resealing take?
Allow around two hours for one bath or shower, longer for a whole bathroom. You will know how long to expect before we start.
Is it messy?
Tidy work is part of the job. Nearby surfaces are protected.
Can you just seal over the old silicone?
No, never. A bead laid over old silicone soon starts to come away. We remove the old bead completely before resealing.
Landlord and commercial work in Highstead
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
If you manage several properties in or around Highstead, several properties can go on one quote. Send us the addresses and the work at each.
What bathroom resealing looks like in Highstead
Highstead is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Church of St Mary the Virgin, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Schools such as Reculver Church of England Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. For landlords with property near Herne Bay station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Highstead is about 2 miles south-east of Herne Bay, in Kent. From the centre of Highstead to the outskirts, bathroom resealing is available for homes and businesses alike. 922 places in Kent are on our list. Our Chelmsford page covers work nearby (40 miles or so).
Every address in CT3 and CT6 is within our area for bathroom resealing. If you’re just outside Highstead, we cover Hawthorn (1 mile north), Boyden Gate (1 mile south-east), Millbank (1 mile south-west), Old Tree (1 mile south) and Hillborough (1 mile north). Further out, we also cover Canterbury (7 miles south-west), Margate (9 miles east), Ramsgate (10 miles east), Broadstairs (11 miles east), Whitstable (6 miles west) and Deal (13 miles south-east).
Around Highstead
Around Highstead, our work takes us to homes and buildings near Bishopstone Cliffs and Hog & Donkey pub. The nearest railway station is Herne Bay station, about 2.7 miles west. Nearby you’ll also find Whitstable and Tankerton Hospital (5.6 miles west). Green spaces nearby include West Blean and Thornden Woods.
What affects the quote in Highstead
The price is agreed before any work begins. It takes into account:
- Which sealant suits the joint
- The number and length of the joints
- How many areas need sealing
- Whether old sealant or filler has to be cut out
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or send us an email.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- Photos by email, if that’s easy
- Any previous sealing or DIY work
- The problem you’ve noticed
- Any access issues, like height or stairs
Every job is quoted individually. Simply phone 0345 464 0079 or send us an email and describe the job and send pictures if you have them.
Different surfaces, different methods
Wet rooms
A wet room floor and its walls can move independently, so the corners need a flexible seal, not grout. Where grout in a corner has cracked, we can replace it with sealant.
Basins & vanity units
The back of a basin gets wet every time someone washes. Corners behind basins are where mould tends to start, so it’s cut out and renewed just like a bath joint.
Also near Highstead
What else we do in Highstead
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Run the extractor fan during and after every shower
- Give the silicone its full cure time
- Dry worktop joints after washing up
- Dry the bead with a towel now and then
Give the silicone time to cure before it gets wet, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
What happens if it’s left?
Running new silicone over the old joint can look tidy for a few weeks, but it can’t stick to what’s underneath. Water creeps under it and mould follows, and the next reseal means two layers to cut out. Around Highstead, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first.
Why Highstead clients choose us
- We agree the colour with you first
- 180+ five-star Google reviews
- Sealant colour chosen to suit
- White, clear, grey or coloured to suit, where the product allows
Take a look at what affects the cost or what customers say.