Kent · England

Regrouting in Highstead, Kent

Professional regrouting in and around Highstead, with every bit of old sealant taken out first and a 12-month guarantee.

  • A grout colour that no longer suits the room
  • Grout in corners that has cracked
  • Splashback grout that has darkened

Regrouting in Highstead

Regrouting in Highstead, done properly

When grout stays dark however much you clean it, the stain is often in the grout itself. New grout is the fix that lasts and you can pick a different colour while you are at it. We work on bathroom floors, wet rooms and tiled floors, and the jobs we see most are grout in corners that has cracked and dirty, worn grout on a tiled floor.

Being in a small place like Highstead makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.

Each job carries a 12-month guarantee.

Location
Highstead (CT3, CT6)
Wider area
Kent
Guarantee
One year on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Updated
26 October 2026
Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall

How to look after the new joints

Simple care keeps the joints in good condition. We recommend:

  • Give the walls a quick rinse after use
  • Check the corner silicone every few months
  • Use gentle cleaners on grout
  • Keep the fan on after showering

If a tile starts to feel loose, get it looked at early. A loose tile cracks the grout around it and lets water in.

Once grout cracks, it tends to get worse. Water gets in behind and the tiles can start to loosen and early regrouting can avoid a much bigger job.

Highstead homes and their sealant

Highstead is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

For landlords with property near Herne Bay station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. For site and facilities teams at buildings such as Reculver Church of England Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Highstead is about 2 miles south-east of Herne Bay, in Kent. For regrouting in and around Highstead, it’s easy to get a quote: please phone 0345 464 0079 or send us an email. We cover Kent from our Crawley base. 922 places in Kent are on our list, from the larger towns to small villages. Our Chelmsford page covers work nearby, about 40 miles away.

Work in CT3 and CT6 is quoted and booked the same way as anywhere else. Other places close to Highstead include Hawthorn (1 mile north), Boyden Gate (1 mile south-east), Millbank (1 mile south-west), Old Tree (1 mile south) and Hillborough (1 mile north). Within a short drive, we also cover Canterbury (7 miles south-west), Margate (9 miles east), Ramsgate (10 miles east), Broadstairs (11 miles east), Whitstable (6 miles west) and Deal (13 miles south-east).

Landmarks near Highstead

Around Highstead, our work takes us to homes and buildings near Bishopstone Cliffs and Hog & Donkey pub and the streets around them. Highstead’s nearest station is Herne Bay station, about 2.7 miles west. Nearby you will also find Whitstable and Tankerton Hospital (5.6 miles west). Not far away are West Blean and Thornden Woods.

Map of Highstead © OpenStreetMap contributors

Work for landlords, hotels and businesses

Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

What affects the quote in Highstead

We quote each job individually. This is what makes a difference:

  • The number of rooms or windows
  • Whether old sealant or filler has to be cut out
  • Mould in or behind the old joints
  • How easy the joints are to reach

Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.

What we need to know

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • Roughly how big the job is
  • What the problem is, such as mould, gaps, leaks or cracking
  • If it’s domestic, commercial or a hotel
  • Whether it has been sealed before

If you’re in Highstead and need regrouting, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before work begins.

Surface by surface

Corners and edges

We reseal edges at the same time as regrouting, so the whole area is finished together.

Bathroom wall tiles

Tiles away from the shower stay drier but still stain and crack. New grout freshens them up.

FAQs for Highstead

Do you work for landlords with property near Herne Bay station?

Yes, rental work is part of what we do. You can ring 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before we start.

Can you do regrouting in Highstead?

Yes. We work across London and the South East, and Highstead is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing.

Is it messy?

No. We protect the surfaces around the joints, and we tidy up before we go.

How do I get a quote for regrouting in Highstead?

The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote.

Could my grout be a different colour after regrouting?

Yes. Many customers do. A darker grout hides marks better, while lighter grout brightens a room.

Should I try DIY first?

Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Will there be a smell?

There can be a smell while the sealant cures, which fades as it sets. Ventilation helps.

Do you guarantee regrouting?

Our 12-month guarantee applies to all our work. We’re also fully insured.

When to call us in Highstead

Hard water and soap leave a film on grout that is hard to shift. In time the grout under it darkens and breaks down, which is when replacing it makes sense.

People usually contact us when they notice something like this:

  • Splashback grout that has darkened
  • Gaps where the shower grout has gone
  • Grout that’s cracking and breaking up
  • Floor grout that won’t come clean

In the older streets around Church of St Mary the Virgin, walls and floors in older homes can move, and sealant and grout show it first.

What to look for in a quote

  • When the joint can take water or movement
  • How the colour is chosen
  • The length of the guarantee
  • Whether they seal over old material or remove it

How to choose a mastic man

Why it’s worth doing now in Highstead

Grouting over old grout rarely lasts. It sits thinly on top and soon flakes away. Removing the old grout to an even depth lets the new grout key in properly. Where a wall is exposed, as many are in small places like Highstead, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

Combining jobs into one visit normally makes better use of the time than several visits. We’ll send you a clear quote for the lot.

Why book with us

  • Old sealant always removed completely
  • Arbo and Everbuild products
  • Domestic, commercial and hotel work
  • ARBOMaster approved applicator

See how sealant jobs are priced and what customers say.

What happens on the day

There is not much for you to do on the day. Show us the job and we’ll take it from there. The job generally takes anything from a few hours to a full day, depending on the area, including the tidy-up. In a small place like Highstead, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We start by checking the tiles for any that are loose or hollow.
  2. The old grout comes out to a consistent depth, without damaging the tiles.
  3. Dust and debris are vacuumed out of every joint.
  4. Fresh grout goes into the joints and the tile faces are wiped clean.
  5. The corners and edges get new silicone, because grout there would crack.

Getting ready for the visit

  • Mention if the joints have been sealed before
  • Keep children and pets away from the work area
  • Let us know about parking restrictions

Get a quote

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.

Get a price

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job