Kent · England
Bathroom & kitchen resealing in Millbank, Kent
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Millbank. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Mouldy sealant that has gone black
- A messy, uneven bead from a previous reseal
- New sealant laid over old sealant that is now lifting
Bathroom resealing in Millbank, done properly
Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across Millbank. We are ARBOMaster approved and fully insured, and the work comes with a 12-month guarantee. Typical jobs include leaks into the floor or ceiling below and a joint torn by a bath that flexes, across shower trays & enclosures, sinks & splashbacks and kitchen worktops & upstands.
Being in a small place like Millbank makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Every job is covered by our 12-month guarantee, wherever you are in Kent.
- Where
- Millbank (CT3)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
How the job changes by surface
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. We seal them in a colour that suits the worktop, so the line doesn’t stand out.
Shower trays & enclosures
There are generally two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both get soaked every time the shower runs, so each is cut out and renewed with anti-fungal sanitary silicone.
Leave it or put it right?
Bleach and mould sprays may lighten black marks for a while, but where mould is inside the silicone it normally comes back. The lasting answer is to remove the bead and start again. Around Millbank, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why book with us
- Anti-fungal silicone where joints get wet
- Old sealant always removed completely
- Experience in homes, commercial sites and hotels
- We agree the colour with you first
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
What affects the cost of bathroom resealing
The price is agreed before any work begins. It’s based on:
- Which sealant suits the joint
- Access and height
- How many rooms, windows or areas are involved
- Mould in or behind the old joints
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- Whether it’s a home or a business
- Photos by email, if that is easy
- How we’d reach the joints
- Roughly how big the job is
For bathroom resealing in Millbank, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Do you need bathroom resealing in Millbank?
Baths and trays move. Acrylic in particular gives slightly under the weight of water and a person, and a tray that isn’t fully bedded can rock. That movement works at the bead until it splits or peels away.
These are the problems we are asked about most:
- Black spots spreading through the bead
- Shrunken sealant along the back of a worktop
- Leaks into the floor or ceiling below
- Splits where the tray meets the wall
Schools such as Hoath Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
What your quote should include
- The length of the guarantee
- How long to leave it before use
- How much experience the applicator has
- What the quote includes, VAT included or not
Places near Millbank
What else we do in Millbank
What sealant work cannot fix
To be straight with you, some problems need a different trade:
- Failed grout lines across the wall
- Tiles that have come away from the wall
- A tray that rocks until it’s re-bedded
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Where we work in Millbank
- Sinks & splashbacks
- Baths
- Kitchen worktops & upstands
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
Millbank: your questions answered
I let a flat near Herne Bay station. Can you help?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we will send you a clear quote.
Is Millbank within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
How long does it take to reseal a bath or shower?
It takes a morning or an afternoon for most single baths and showers. You’ll know how long to expect before work begins.
What should I tell you?
A short description and the location, plus photos if you have them. We’ll ask anything else we need to know.
Can new silicone go straight over the old?
No. New silicone will not bond to old silicone, so it lifts and traps water and mould underneath. We always take the old sealant out completely.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints.
Can you work on commercial sites?
Yes. We’ve worked for hotels, offices and other businesses, and we’re fully insured.
What bathroom resealing looks like in Millbank
Millbank is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Herne Bay station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. If you live in an older home near Church of the Holy Cross, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Millbank is about 2 miles south-east of Herne Bay, in Kent. Jobs in Millbank get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Our Kent coverage runs to 922 places, Millbank among them. There’s also a page for Chelmsford, about 40 miles away.
Postcode districts we cover here for bathroom resealing: CT3. Neighbouring places we cover for bathroom resealing include Maypole (1 mile south), Old Tree (1 mile south-east), Highstead (1 mile north-east), Hoath (1 mile south) and Knave's Ash (1 mile south-west). Within a short drive, we also cover Canterbury (6 miles south-west), Margate (10 miles east), Dover (15 miles south), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Landmarks near Millbank
Around Millbank, our work takes us to homes and buildings near Spires Academy, Curtis Wood and The Huntsman And Horn Public House and the streets around them. Millbank’s nearest station is Herne Bay station, roughly 2.4 miles north-west of the centre. Other landmarks nearby include Whitstable and Tankerton Hospital (5 miles west). Open spaces near Millbank include West Blean and Thornden Woods.
How the visit works
There’s no need to move everything out, only the area right around the joints. Everything nearby is protected, and the work takes a couple of hours for a single bath or shower for a typical job. In a small place like Millbank, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First the area is protected and every bit of old sealant removed.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Plan for the work area to be out of bounds to pets and children
- Mention any sign-in or site rules at work premises
How to get a quote
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or email us.