Kent · England
Glazing & conservatory sealant in Millbank, Kent
Our applicators work in Millbank on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- A quick top-up bead that didn’t last
- Split or lifting silicone on glass
- Water tracking down the inner face of the glass
How we quote for glazing silicone
Call for a quick quote. What matters most is:
- Whether there’s mould to deal with
- When we can work, for business premises
- Which sealant suits the joint
- How much there is to do
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What to tell us for a quote
When you call or email, these details help:
- Pictures of the joints, sent by email
- The problem you’ve noticed
- Whether it’s a home or a business
- Any previous sealing or DIY work
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, call 0345 464 0079 or email us.
About our glazing silicone in Millbank
Sealant on glazing does not last for ever. Weather and movement take their toll, and once it cracks, water follows. Resealing puts that right. We work on glass-to-glass joints, conservatory frames and shower screens, and the jobs we see most are rooflight joints letting water in and new silicone smeared over old sealant.
Mastic can only go onto a dry, clean joint, so window work in Millbank is booked around the forecast. Let us know about access to all the frames, upstairs ones included.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Millbank (CT3)
- Region
- Kent
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Aftercare tips
After the cure time, these simple habits help:
- Look over the glazing joints once a year
- Ventilate the conservatory to cut condensation
- Use a gentle glass cleaner and a soft cloth
- Keep conservatory gutters clear of leaves
Do not use blades or scrapers near the bead when you clean. A soft cloth or sponge is best.
Conservatory leaks rarely stay small. Water travels along the frame and into the wall, so get it looked at when you first see it.
Nearby places to Millbank
What else we do in Millbank
Why act early in Millbank
Resealing cannot fix a failed unit or a cracked panel. We say so plainly, so you can call the right trade. Where a wall is exposed, as many are in small places like Millbank, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, phone 0345 464 0079 or email us and we will give you an honest view and a quote.
What you get with us
- Anti-fungal silicone where joints get wet
- Full insurance on every job
- You choose the colour before work begins
- Old sealant always removed completely
What the job involves on each surface
Conservatory frames
Conservatory frame joints are a common source of leaks. We cut out the old sealant and reseal.
Glass-to-frame joints
Glass-to-frame joints need a sealant that bonds to both. We choose a product that suits both.
Millbank questions
I let a flat near Herne Bay station. Can you help?
Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Does living near the coast affect glazing silicone in Millbank?
Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. Walls facing the sea are generally the first to need attention.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Can a conservatory leak be sealed?
If the water is coming in through failed sealant joints, yes. If the cause is the roof, a panel or a unit, we will say so.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Do I have to be there?
We need access to the joints, so we will agree that with you when we book. Indoors, that normally means someone at home.
Do you hold any approvals?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
What we do, step by step
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for most jobs. For a village or hamlet like Millbank, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We trace the leak and confirm it’s a sealant joint.
- The failed silicone is cut out without marking the glass or frame.
- The joint is cleaned and degreased.
- We lay the new bead and tool it smooth.
- Each joint is checked and, where possible, water-tested.
Before we arrive
- Try not to wet indoor joints just before the visit
- Tell us about any water getting in
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
We quote each job on its own. Simply phone 0345 464 0079 or send us an email and describe the job and send pictures if you have them.
Advice
Honest limits
Before booking, it’s worth knowing the limits:
- Glass that needs replacing
- Leaks from the roof covering or flashing (a roofer’s job)
- Rotten or badly damaged frames
If in doubt, call 0345 464 0079 or email us and we’ll say what we think.
Joints and surfaces we work on
- Shower screens
- Conservatory frames
- Rooflights
- Glass-to-frame joints
- Glass balustrade bases
- Glass-to-glass joints
What glazing silicone looks like in Millbank
Millbank is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you let a flat or house near Herne Bay station, glazing joints are worth checking at the end of a tenancy, before a small leak grows. Managing a site like Hoath Primary School? Then the mastic around its windows and doors needs looking after like any other building’s. In the older streets around Church of the Holy Cross, frames set in older brick or stone need a sealant that suits the wall as well as the frame.
Millbank is about 2 miles south-east of Herne Bay, in Kent. We provide glazing silicone to householders, landlords and businesses in Millbank. Millbank is one of 922 places in Kent where we work. Chelmsford is on our list too, about 40 miles from Millbank.
Every address in CT3 is within our area for glazing silicone. If you are just outside Millbank, we cover Maypole (1 mile south), Old Tree (1 mile south-east), Highstead (1 mile north-east), Hoath (1 mile south) and Knave's Ash (1 mile south-west). Larger places within reach include Canterbury (6 miles south-west), Margate (10 miles east), Dover (15 miles south), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Around Millbank
In Millbank, that means homes and buildings near Spires Academy, Curtis Wood and The Huntsman And Horn Public House. Millbank’s nearest station is Herne Bay station, roughly 2.4 miles north-west of the centre. Well-known places in the area include Whitstable and Tankerton Hospital (5 miles west). For a walk, there’s West Blean and Thornden Woods.
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.