Kent · England
Hillborough Bathroom Resealing
Our applicators work in Hillborough on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Black spots spreading through the bead
- Failed sealant on the screen profile
- Shrunken sealant along the back of a worktop
Bathroom resealing for homes and businesses in Hillborough
Across Hillborough, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. We are often asked to deal with smears of silicone across the tiles and a reseal done over the top of the old bead, across kitchen worktops & upstands, baths and wet rooms.
Around Hillborough, you’ll mostly find houses and bungalows, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
We stand behind the work with a one-year guarantee, so you are not left on your own once the job is done.
- Where
- Hillborough (CT6)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Do you need bathroom resealing in Hillborough?
Plenty of failed sealant has been laid over the top of older sealant. New silicone won’t bond to old silicone, so it peels, leaks and hides mould behind it.
Look out for any of the following:
- Black mould in the silicone that will not clean off
- Leaking joints on a shower screen
- Sealant that has split, shrunk or peeled away
- A reseal done over the top of the old bead
Schools such as Reculver Church of England Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
What your quote should include
- Whether the sealant suits the joint
- Whether all the old sealant comes out first
- Who does the work, and how experienced they are
- What the cure time is
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
When it is not the sealant
We will always be straight with you, so here’s what sealant cannot fix:
- A bath or tray that moves because it isn’t properly supported
- Failed grout lines across the wall
- Water coming from the plumbing rather than the joint
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly.
Joints and surfaces we work on
- Baths
- Shower trays & enclosures
- Sinks & splashbacks
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Stick to a soft cloth and a mild cleaner
- Wipe the sealant dry after showering
- Dry worktop joints after washing up
- Never pick at the silicone with a blade
Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
Bathroom resealing in Hillborough: local notes
Hillborough is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
In the older streets around Church of St Mary the Virgin, walls and floors in older homes can move, and sealant and grout show it first. If you let a flat or house near Herne Bay station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Hillborough is about 2 miles east of Herne Bay, in Kent. Whether you are in the middle of Hillborough or further out, we cover bathroom resealing for every kind of property. Hillborough is one of 922 places in Kent where we work for bathroom resealing. We also work in Chelmsford, around 39 miles away.
We work across CT6 for bathroom resealing and the streets around it. Streets in the area include Manor Road, Puffin Road and Neville Road, and we cover them all. Hillborough sits on or near the A299. Other places close to Hillborough include Hawthorn (1 mile south-east), Bishopstone (1 mile north), Beltinge (1 mile north-west), Broomfield (1 mile south-west) and Highstead (1 mile south). Larger places within reach include Canterbury (7 miles south-west), Margate (9 miles east), Ramsgate (11 miles east), Broadstairs (11 miles east), Whitstable (6 miles west) and Deal (14 miles south-east).
Near you in Hillborough
Typical jobs here are in homes near Bishopstone Cliffs and The Huntsman And Horn Public House. The nearest railway station is Herne Bay station, about 2.2 miles west of the centre. Nearby you will also find Whitstable and Tankerton Hospital (5.2 miles west). For a walk, there’s West Blean and Thornden Woods.
How the visit works
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we’ve agreed what’s being done, the area is protected and the work begins. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. A visit to Hillborough is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We start by protecting the area and stripping out the old bead.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We clear away and tell you when it can get wet, usually after around 24 hours.
Before we arrive
- Tell us about any previous sealing or DIY attempts
- Mention any sign-in or site rules at work premises
- Tell us if parking is tricky
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Advice
FAQs for Hillborough
Is Hillborough within the area you cover?
Yes. Hillborough is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do bathroom resealing in Hillborough?
Yes. Our work covers London and the South East, and Hillborough is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we’ll explain our choice.
What do you need from me for a quote?
Just the basics: where it is, what you’ve noticed and how we reach it. Then call 0345 464 0079 or email us.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
How long does a bath or shower reseal take?
Allow a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. You will know how long to expect before work begins.
Do you guarantee your resealing?
Yes. Every job carries our one-year guarantee, and we’re fully insured.
Are you fully insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
How we quote for bathroom resealing
Every job gets its own quote. These are the things that affect it:
- Access and height
- How much there is to do
- The number of rooms or windows
- When we can work, for business premises
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Helping us quote
To help us quote quickly, let us know:
- Whether it’s a home or a business
- The problem you’ve noticed
- If someone has resealed it before
- Photos by email, if that is easy
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. When it suits you, call 0345 464 0079 or drop us an email.
Why it’s worth doing now in Hillborough
Bleach and mould sprays may lighten black marks for a while, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again. Around Hillborough, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, call 0345 464 0079 or send us an email for an honest opinion and a quote.
Why book with us
- Sanitary silicone with an anti-fungal additive in wet areas
- Approved under the ARBOMaster scheme
- Homes, businesses and hotels
- We agree the colour with you first