Kent · England
Remedial sealant & repairs in Hillborough, Kent
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Hillborough and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- A second bead peeling off the first
- Floor or wall movement joints that have failed
- Beads that never stuck properly
What happens on the day
The work is kept neat and contained to the area we’re working on, so you can carry on as normal. Expect the work to take a few hours for a typical bath or shower, longer where several layers have been applied, and we tell you how long to leave it before we go. For a job in Hillborough, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- We use the right backing and sealant for any joint that moves.
- Finally we finish the joint and talk you through what we found.
Getting ready for the visit
- Keep children and pets away from the work area
- On commercial sites, let us know about site rules
- Mention if the joints have been sealed before
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you’re ready, call 0345 464 0079 or drop us an email.
Related advice
Remedial sealant for homes and businesses in Hillborough
Remedial work is what we do when sealant has failed or been done badly. New sealant over old, smeared beads, unsuitable products and hidden mould all need stripping out. We work on botched or over-sealed joints, expansion joints and leaking tray & enclosure joints, and people most often call us about kitchen joints letting water behind the worktop and sealant peeling off a dusty or damp surface.
Smaller places like Hillborough still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.
Our work is backed for twelve months, in Hillborough and everywhere else we cover.
- Location
- Hillborough (CT6)
- Region
- Kent
- Cover
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Also near Hillborough
Other services in Hillborough
Common problems we fix in Hillborough
Using the wrong product is a common cause: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.
The problems people normally mention when they call are:
- Repeat leaks from the same joint
- Products that weren’t meant for the joint
- A second bead peeling off the first
- Black mould underneath the bead
In the older streets around Church of St Mary the Virgin, walls and floors in older homes can move, and sealant and grout show it first.
What to look for in a quote
- What the quote includes, VAT included or not
- What preparation is included
- What guarantee comes with the work
- Is the old sealant removed completely?
What affects the quote in Hillborough
Your quote is based on your job. We look at:
- Working hours on commercial sites
- The number of rooms or windows
- How much old sealant there is and how hard it is to remove
- Any mould that needs treating
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- The type of property
- Roughly how big the job is
- Where the job is, and your postcode
- How we’d reach the joints
For remedial sealant in Hillborough, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Remedial sealant around Hillborough
Hillborough is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you look after a building such as Reculver Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. For landlords with property near Herne Bay station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Hillborough is about 2 miles east of Herne Bay, in Kent. Whether you are in the middle of Hillborough or further out, we cover remedial sealant for every kind of property, from flats and houses to offices and hotels. Hillborough is one of 922 towns and villages in Kent we cover. For nearby work, see our Chelmsford page, about 39 miles away.
Postcode districts we cover here for remedial sealant: CT6. That includes homes and businesses on Manor Road, Puffin Road and Neville Road and the roads around them. Hillborough is on the A299, so it’s easy for us to get to. We also cover the places around Hillborough: Hawthorn (1 mile south-east), Bishopstone (1 mile north), Beltinge (1 mile north-west), Broomfield (1 mile south-west) and Highstead (1 mile south). Larger places within reach include Canterbury (7 miles south-west), Margate (9 miles east), Ramsgate (11 miles east), Broadstairs (11 miles east), Whitstable (6 miles west) and Deal (14 miles south-east).
What’s near Hillborough
We work in homes and buildings around Bishopstone Cliffs and The Huntsman And Horn Public House, among other places. The nearest railway station is Herne Bay station, about 2.2 miles west. A little further out are Whitstable and Tankerton Hospital (5.2 miles west). For a walk, there’s West Blean and Thornden Woods.
Leave it or put it right?
Hidden water does the most damage: soaked floorboards, ceiling stains below and blown plaster. By comparison, sorting the joint is quick. Homes in smaller places like Hillborough can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
What you get with us
- Sanitary silicone with an anti-fungal additive in wet areas
- Every job guaranteed for a year
- A sealant colour to suit the surroundings
- We leave the area clean and tidy
Read our cost guide or what customers say.
Hillborough: your questions answered
Can you help a landlord with a rental near Herne Bay station?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Is Hillborough within the area you cover?
Yes, Hillborough is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you fix expansion and movement joints?
Yes. Backing sets the depth and stops the sealant sticking to the back.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Can you strip sealant from an acrylic tray safely?
Yes. We take our time over removal, particularly on softer surfaces like acrylic.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we are fully insured.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Landlord and commercial work in Hillborough
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Clean sealant with mild products only
- Get the cause of a repeat leak found before resealing
- Don’t point over movement joints
- Look for stains below bathrooms now and then
If the joint ever needs renewing, have it cut out, not sealed over. Over-sealing is how many remedial jobs start.
Leaks through failed sealant grow over time. Each use pushes more water behind the bead, into whatever is behind or below. Early action keeps it to a sealant job.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- Water damage behind tiles that needs a tiler
- A cracked shower tray or bath (that needs repair or replacing)
- Movement from fittings that are not supported
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Failed movement joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Expansion joints
- Leaking tray & enclosure joints
- Botched or over-sealed joints