Kent · England
Bathroom & kitchen resealing in Flemings, Kent
Problem with your baths, showers and worktops in Flemings? We remove the old material, prepare the joints and seal them properly.
- Failed sealant on the screen profile
- Smears of silicone across the tiles
- Gaps where the bath or tray has moved
Bathroom resealing for homes and businesses in Flemings
Showers work their sealant harder than baths. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. They’re resealed with anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. Typical jobs include splits where the tray meets the wall and a bead that has pulled away from the tiles, on basins & vanity units, baths and shower trays & enclosures.
Around Flemings, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Flemings (CT13)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Your questions about bathroom resealing in Flemings
Can you do bathroom resealing in Flemings?
Yes, Flemings is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or drop us an email and let us know what needs doing, and we will send you a clear quote.
I let a flat near Sandwich station. Can you help?
Yes. We work for landlords and letting agents as well as homeowners, and several properties can go on one quote. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Can I add another job to the visit?
Yes, we can. More than one area can go on one quote.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Can you reseal around my kitchen sink and worktop?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
What should I tell you?
Tell us what needs doing and where, plus pictures if you have them. If we need more, we’ll ask.
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
How to look after the new joints
After the cure time, these simple habits help:
- Do not let bottles sit on the bead
- Dry the bead with a towel now and then
- Check the joints every few months for splits or lifting
- Keep the fan on for a while after bathing
Don’t stand bottles along the bead, as they hold water against it. A quick squeegee after showering helps the joint dry.
A failed kitchen joint is easy to miss. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. Resealing before that happens protects the worktop.
How we quote for bathroom resealing
The price is agreed before any work begins. It’s based on:
- Which sealant suits the joint
- Access and height
- Whether there’s mould to deal with
- When we can work, for business premises
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Helping us quote
What to tell us when you ask for a quote:
- The problem you’ve noticed
- The type of property
- Roughly how big the job is
- A few pictures by email, if you can
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
More services for Flemings
What the job involves on each surface
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. It’s resealed in white, clear or a colour to suit.
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. We reseal it along with the base of the enclosure, sealing the side the enclosure’s instructions call for.
Signs you need bathroom resealing in Flemings
No sealant lasts indefinitely. Every shower, every splash and every wipe with a cleaner take their toll over the years, so its life depends on how the room is used, cleaned and aired.
Look out for any of the following:
- Black spots spreading through the bead
- A bead that has pulled away from the tiles
- Water escaping at the shower enclosure
- New sealant laid over old sealant that is now lifting
For site and facilities teams at buildings such as Ash Cartwright and Kelsey Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What your quote should include
- Whether VAT is included
- Whether all the old sealant comes out first
- Whether the sealant suits the joint
- What guarantee comes with the work
What we do, step by step
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and clear up. It normally takes two to three hours for a typical bath, depending on how much old sealant there is. In a small place like Flemings, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- For business premises, tell us about site rules or sign-in
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
If you’re in Flemings and need bathroom resealing, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before we start.
Related advice
Leave it or put it right?
A clean new bead makes a room look cared for, which helps when a home is being let or put on the market. Lumpy sealant with smears on the tiles has the opposite effect, and it’s harder to put right later. Older cottages and farmhouses around Flemings can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
Why Flemings customers choose us
- You choose the colour before work begins
- Homes, businesses and hotels
- One-year guarantee on every job
- Full insurance on every job
Take a look at how sealant jobs are priced or what customers say.
Bathroom resealing around Flemings
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Homes close to Church of St Nicholas include some older properties, and walls and floors in older homes can move, and sealant and grout show it first. For landlords with property near Sandwich station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Flemings is about 6 miles north-west of Deal, in Kent. From the centre of Flemings to the outskirts, we cover bathroom resealing for every kind of property. Flemings is one of 922 places in Kent we cover for bathroom resealing. Chelmsford is on our list too, about 47 miles from Flemings.
Jobs for bathroom resealing in CT13 works the same way as everywhere else we cover. If you’re just outside Flemings, we cover Barnsole (1 mile west), Hammill Park (1 mile south), Coombe (1 mile north-east), Staple (1 mile west) and Ash (1 mile north). Further out, we also cover Canterbury (9 miles west), Margate (9 miles north-east), Dover (9 miles south), Folkestone (13 miles south), Ramsgate (8 miles north-east) and Broadstairs (9 miles north-east).
Around Flemings
Locally, jobs take us to homes and businesses close to The Black Pig Inn and Sandwich Technology School. For rail, the closest station is Sandwich station, roughly 2.8 miles east. Well-known places in the area include White Mill (2.4 miles north-east). Not far away are Monk's Wall nature reserve.