Edinburgh · Scotland
Bathroom Resealing in Crewe Toll
Problem with your baths, showers and worktops in Crewe Toll? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Lumpy, uneven sealant from a DIY attempt
- Water getting behind the bath panel
- Sealant that has split, shrunk or peeled away
Why deal with it now?
Running new silicone over the old joint can look tidy for a few weeks, but it cannot stick to what’s underneath. Water creeps under it and mould follows. Private landlords in Crewe Toll must meet the Repairing Standard, and damp or leaks can fall short of it, so it’s worth fixing failed sealant before a tenant reports it.
The cost depends on how much there is to do, how much old material has to come out and access to the work. We give a clear quote before we start.
Why book with us
- Trusted Arbo and Everbuild sealants
- Fully insured
- Neat joints and a tidy finish
- Old sealant always removed completely
Take a look at how sealant jobs are priced or customer reviews.
About our bathroom resealing in Crewe Toll
A bead that has gone black, split or come away is worth sorting before it lets water through. Just email us at info@mrmastic.co.uk with a photo of the joints, and you will get a clear quote for bathroom resealing in Crewe Toll. Common call-outs are for a messy, uneven bead from a previous reseal and a bead that has pulled away from the tiles, on wet rooms, shower trays & enclosures and kitchen worktops & upstands.
Crewe Toll is in one of Scotland’s four big cities, where many tenement bathrooms were fitted into rooms that weren’t built for them. Space is tight and ventilation can be poor, and steam with nowhere to go is what turns sealant black and grout grey.
There’s a 12-month guarantee on every job, whatever its size.
- Location
- Crewe Toll (EH4, EH5, EH3)
- Wider area
- Edinburgh
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Nearby places to Crewe Toll
What else we do in Crewe Toll
Common questions in Crewe Toll
Do you work in hotels near Crewe Toll?
Yes, hospitality work, including hotels, is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Can a failed shower seal in a tenement flat in Crewe Toll leak into the flat below?
It can. Tenement floors are generally timber, and water from a failed seal can find its way down to the flat below. It’s worth sorting sealant and grout before it gets that far.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Do you take out the old sealant first?
Yes, every time. New sealant will not bond properly to old, so the joint is cleaned back first.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Can I add another job to the visit?
Yes. Just list everything you need and we’ll quote it together.
Is the work guaranteed?
Yes. We give a 12-month guarantee on every job, and we are fully insured.
Can you just seal over the old silicone?
No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.
How the job changes by surface
Wet rooms
Wet room floors move slightly as they’re used, so the corners need a flexible seal, not grout. Cracked grout in a corner can be cut out and replaced with silicone.
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A continuous bead along the back keeps water out.
For landlords and businesses
We also work for property managers and facilities teams in Crewe Toll and across Edinburgh. We can quote a run of properties together, and we’re fully insured.
If you manage several properties in or around Crewe Toll, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
Honest limits
Before booking, it’s worth knowing the limits too:
- A tray that rocks until it’s re-bedded
- Water coming from the plumbing rather than the joint
- A tray or bath that’s cracked through
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Sinks & splashbacks
- Baths
The process
All our tools and materials come with us in the van, so you do not need to buy or prepare anything. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes a couple of hours for a single bath or shower. Many homes in Scotland’s cities are tenement flats, reached through a shared close and up a common stair. In Crewe Toll, it helps to know the floor, the door entry arrangements and the nearest parking.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
How to prepare
- Clear the area around the work
- Tell us about access, such as stairs, a lift or high-level joints
- Keep pets and children clear of the area while we work
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Read more
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Keep bottles off the sealant line
- Keep the fan on for a while after bathing
- Avoid abrasive pads on the sealant
- Squeegee the walls and tray after use
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning usually will not remove it. Replacing the sealant early keeps the job small.
Bathroom resealing around Crewe Toll
Crewe Toll is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Managing a site like Craigroyston Community High School? Then we reseal washrooms and kitchens in schools and businesses as well as homes. For landlords with property near Haymarket station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Crewe Toll is about 2 miles north-west of Edinburgh, in Edinburgh. We provide bathroom resealing to homes and businesses in Crewe Toll and nearby. We cover 175 towns and villages across Edinburgh.
Our applicators cover all of the EH4, EH5 and EH3 postcode area for bathroom resealing and the streets around it. Local streets include Ferry Road, Grigor Avenue and Davidson Road, and we cover them all. Other places close to Crewe Toll include East Pilton (1 mile south-east), Pilton (1 mile north), Craigleith (1 mile south-east), Drylaw (1 mile south-west) and West Pilton (1 mile north-west). We also work in nearby towns such as Leith (3 miles east), Buccleuch (3 miles south-east), Dumbiedykes (3 miles south-east), Sciennes (3 miles south-east), Newington (3 miles south-east) and Queensferry (6 miles west).
Local landmarks in Crewe Toll
Locally, jobs take us to homes and businesses close to Starbank Park, Gabrielle Keiller Library and St Columba's Parish Church and the streets around them. The nearest railway station is Haymarket station, about 1.7 miles south of the centre. Nearby you’ll also find Palestine Museum (1.7 miles south-east) and Craigcrook Castle (1.5 miles south-west). Open spaces near Crewe Toll include Corstorphine Hill and The New Leaf Co-op.
How we quote for bathroom resealing
For a quick quote, just ask. What matters most is:
- Mould in or behind the old joints
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- How much there is to do
Leaving a failed joint usually makes the job bigger, not smaller. If you’re unsure, email us at info@mrmastic.co.uk for an honest opinion and a quote.
Asking for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
- If it’s domestic, commercial or a hotel
- Roughly how big the job is
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand.