Scottish Borders · Scotland

Window & door mastic in Woll, Scottish Borders

Mastic around window and door frames, sills and patio doors for Woll, backed by a 12-month guarantee. Ask us for a quote.

  • Rushed sealant from a window installation
  • Black, perished sealant on frames
  • Whistling draughts around closed windows

Window mastic near Woll

Frames and glazing around Woll

Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and sound outside sealant is part of that. Historic houses like Bowhill House (about 4.3 miles north-west) are a reminder that the area around Woll has older buildings as well as new. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.

Around Woll, as everywhere, window mastic is only as good as the preparation behind it.

Woll is about 4 miles south of Selkirk, in the Scottish Borders. Our applicators cover window mastic for homeowners, landlords and businesses in Woll and the surrounding area, as part of our work across the Scottish Borders. 89 places in the Scottish Borders are on our list, large and small. There’s also a page for Edinburgh, about 34 miles away.

Here we cover the TD7 postcode area for window mastic. Other places close to Woll include Ashkirk (1 mile north-east), Selkirk (4 miles north), Stirches (4 miles south-east), Lilliesleaf (4 miles north-east) and Burnfoot (5 miles south-east). Larger places within reach include Galashiels (9 miles north), Hawick (5 miles south-east), Jedburgh (12 miles east), Wilton (5 miles south-east), Innerleithen (12 miles north-west) and Melrose (9 miles north-east).

Local landmarks in Woll

Nearby you’ll also find Peel Hill (3.7 miles north) and Hawick Community Hospital (5 miles south-east). Not far away are Headshaw Loch and Hare and Dunhog Mosses.

Map of Woll © OpenStreetMap contributors

Window mastic for homes and businesses in Woll

A cold draught around a closed window often comes from the frame edge. A new joint stops the air getting through and quietens the whistle on windy days. If the draught is through the window seals instead, we’ll tell you. If you are dealing with water coming in at the bottom corners of a door and draughty joints inside around the window, we can help, on uPVC windows, aluminium frames and composite doors alike.

Outdoor sealant needs a dry surface, so window work around Woll is planned around the weather. Let us know about access to every frame, including any upstairs.

Big or small, you get the same one-year guarantee.

Location
Woll (TD7)
Region
Scottish Borders
Guarantee
A year, on every job
Quote
A clear quote up front
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

Why deal with it now?

Redecorating is a good moment to renew the mastic. A clean new bead makes new paint or render look finished, and it’s easier while the walls are being worked on anyway. In an older home around Woll, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.

Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.

Why us?

  • Anti-fungal silicone where joints get wet
  • Rated 4.9 stars on Google
  • Tidy, careful work
  • White, clear, grey or coloured to suit, where the product allows

Read what affects the cost and what customers say.

Quotes for window mastic in Woll

Your quote is based on your job. We take into account:

  • The old material and how stubborn it is
  • Any mould that needs treating
  • How easy the joints are to reach
  • The size of the job

The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.

What we need to know

You do not need to know the technical terms. It helps if you can tell us:

  • If someone has resealed it before
  • Access, such as stairs, a lift or height
  • How many joints, rooms or windows are involved
  • A few pictures by email, if you can

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.

When something else is needed

A few problems are outside what sealant work can do:

  • Condensation trapped between the panes
  • A door that needs adjusting, rehanging or new seals
  • A sash or casement that won’t close properly

If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before you book.

Surfaces we seal

  • uPVC windows
  • Composite doors
  • Patio & French doors
  • Window sills
  • Timber windows & doors
  • Aluminium frames

What happens on the day

You don’t need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the job takes a few hours for a handful of frames, longer for a whole house in most cases. For a place like Woll, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.

  1. We check how each frame can be reached safely.
  2. Old, cracked mastic is removed completely, along with any loose debris.
  3. Frame and wall are cleaned and must be dry before sealing, and primed where the sealant calls for it.
  4. Deep voids are backed, then the sealant is gunned in.
  5. We tool the joint so water runs off, then clear up.

How to prepare

  • Clear items away from the joints we’re working on
  • Mention any parking rules near the property
  • Try not to wet indoor joints just before the visit

Ask for a quote

Need a quote? Please drop us a line at info@mrmastic.co.uk and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.

Get a quick quote

Advice

Keeping the joints in good condition

Simple care keeps the joints in good condition. Our advice:

  • Walk round the house once a year and look at the joints
  • Don’t paint over the silicone
  • Do not aim a pressure washer at the joints
  • Keep solvents and bleach off the sealant

Clean the frames with mild soapy water, and keep solvents and harsh chemicals off the joint.

On timber windows, water behind the joint can lead to rot. Once wood has rotted, it needs repair before it can be sealed, so early resealing is worth it.

Different surfaces, different methods

Patio & French doors

Heavy door frames can move more than windows. The sealant must cope with it without cracking.

Window sills

Where a sill meets brick or render, the ends often crack first. A tight seal at each end keeps rain out of the wall.

Your questions about window mastic in Woll

Will you come out to Woll?

Yes, Woll is covered. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.

Can you do window mastic in Woll?

Yes, Woll is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.

Can I do it myself?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Do you take out the old sealant first?

Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.

Can you seal the gap between the frame and the plaster indoors?

Yes. Draughts often come through the inside gap too, so it can be worth sealing both.

Are you insured?

Yes, we are fully insured.

How long will my window job take?

The work takes a few hours for a few frames, or a day or more for a whole house. Access and how stubborn the old mastic is affect the time most.

Will it make a mess?

Tidy work is part of the job. We protect what’s around the joints, and we clear up when we’re done.

Common problems we fix in Woll

Joints that are too thin or too deep fail early. A thin smear across a wide gap has nothing to it, while a joint packed solid cannot stretch. That is what backing rod is for.

If you can see any of these, it’s time to have the joints looked at:

  • Water coming in at the bottom corners of a door
  • Old mastic that has gone black or come away
  • Hard, cracked sealant around windows
  • Draughty joints inside around the window

For an older house near a landmark such as Ashkirk Parish Church, frames set in older brick or stone need a sealant that suits the wall as well as the frame.

What to look for in a quote

  • How hidden problems are handled
  • How long the guarantee is
  • Is the old sealant removed completely?
  • What preparation is included

Our hiring checklist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job