Moray · Scotland
Window Mastic in Bogmoor
Window mastic across Bogmoor and nearby, with old sealant always removed completely and a one-year guarantee.
- Water coming in at the bottom corners of a door
- Draughty joints inside around the window
- Cracked sealant at the sill ends
Why act early in Bogmoor
Running fresh sealant over the old joint is tempting, but it will not grip old, dirty sealant. It soon lifts and the leak carries on behind it. The old mastic has to come out. In an older home around Bogmoor, damp from a failed joint can get into timber and plaster.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Why choose Mr Mastic in Bogmoor
- Sanitary silicone with an anti-fungal additive in wet areas
- Experience in homes, commercial sites and hotels
- White, clear, grey or another colour, product permitting
- We never seal over old sealant
Take a look at our cost guide and our reviews.
Window mastic for homes and businesses in Bogmoor
A window frame and the wall around it expand and shrink at different rates. Heat and cold make frames grow and shrink against brick or render that hardly moves. So the sealant has to stretch and recover, which is why we use a low-modulus product. We work on patio & French doors, aluminium frames and timber windows & doors, and the jobs we see most are cold air getting in at the frame edge and old mastic that has gone black or come away.
Many older Scottish homes still have timber windows set into stone walls. The sealant has to suit the stone, which rules out acetoxy silicones that can mark or attack it.
All our work comes with our one-year guarantee.

- Where
- Bogmoor (IV32)
- Wider area
- Moray
- Cover
- 12 months on all our work
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Different surfaces, different methods
Aluminium frames
Aluminium needs a sealant that bonds to coated metal. We use a neutral-cure product.
Composite doors
Composite doors are normally hung in an uPVC-type frame, and the joint around it is sealed like a window. We match the colour to the frame.
Nearby places to Bogmoor
Also in Bogmoor
Common problems we fix in Bogmoor
Every frame moves through the day. Sun on a frame makes it expand, and it contracts again overnight, while the brick or render around it hardly moves. A sealant that cannot keep up eventually tears.
People usually contact us after spotting one of these:
- Gaps between the frame and the inside reveal
- Hard, cracked sealant around windows
- Damp patches on the reveal after heavy rain
- Leaking joints at the ends of sills
For jobs in and around Bogmoor, choosing the right material for each joint is as important as a tidy finish.
What your quote should include
- Whether you can choose the colour
- How the joint is cleaned and prepared
- What insurance they hold
- What happens if they find a problem under the old sealant
Bogmoor homes and the weather
Bogmoor is within about 2 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on the mastic around window and door frames, which can dry out and crack sooner where a building faces the weather. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that.
Around Bogmoor, as everywhere, window mastic is only as good as the preparation behind it.
Bogmoor is about 4 miles west of Buckie, in Moray. We provide window mastic to homes and businesses in Bogmoor and nearby. Across Moray, we cover 58 places, Bogmoor among them. There’s also a page for Aberdeen, about 49 miles away.
Here we cover the IV32 postcode area for window mastic. Local streets include Culriach and Bogmoor Road, all of which we cover. Close by, we work in Upper Dallachy (1 mile east), Nether Dallachy (1 mile north), Garmouth (2 miles north-west), Kingston (2 miles north-west) and Mosstodloch (2 miles south-west). We also work in nearby towns such as Elgin (9 miles west), Buckie (4 miles east), Lossiemouth (9 miles north-west), Keith (9 miles south-east), Ashgrove (8 miles west) and Portknockie (9 miles north-east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Near you in Bogmoor
A little further out are Seafield Hospital (3.8 miles east) and Fochabers Folk Museum (2.6 miles south). Not far away are The Lake.
What happens on the day
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. Most jobs take a morning for a couple of windows and a door. For a place like Bogmoor, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We start by checking each window and door with you.
- The old mastic is cut out and the surfaces cleaned back.
- Where gaps are deep, backing rod goes in first.
- A flexible, weatherproof sealant is applied in a colour to suit the frame.
- Every joint is checked before we leave.
How to prepare
- Clear the area around the work
- Mention any leaks or damp you’ve noticed
- Let us know about earlier repairs to the joints
Ask for a quote
Need a quote? Please send an email to info@mrmastic.co.uk and tell us about the job. We’ll explain what we’d do and give you a clear price before we start.
Read more
What affects the cost of window mastic
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- Mould in or behind the old joints
- How easy the joints are to reach
- The product the joint needs
- When we can work, for business premises
What you pay reflects the work, not a rough estimate. That is why we ask about the job first and send you a clear quote before any work starts.
What we need to know
You do not need to know the technical terms. Just tell us:
- Any access issues, like height or stairs
- A few pictures by email, if you can
- How many joints, rooms or windows are involved
- The problem you’ve noticed
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we’ll take it from there.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. A few tips:
- Wipe condensation off the frames
- Make sure the drainage slots are not blocked
- Paint up to the joint, not over it
- Use gentle cleaners on frames and sealant
Keep sill grooves and drainage slots clear, so rain drains out rather than building up at the sealant.
On timber windows, water behind the joint can lead to rot. Rotten timber needs a joiner, not a sealant, so early resealing is worth it.
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Soft or decayed wood in the frame
- Damp problems in the wall away from the window
- Faulty window hardware
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly.
Surfaces we seal
- Composite doors
- Timber windows & doors
- uPVC windows
- Aluminium frames
- Patio & French doors
- Window sills
Common questions in Bogmoor
Is window mastic in a coastal place like Bogmoor any different?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Do you cover smaller places like Bogmoor?
Yes, Bogmoor is covered. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Where are you based?
Mr Mastic is based in Crawley. We cover Bogmoor and the rest of Moray.
Do you work for hotels and businesses?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
What does window mastic cost?
Every job is different, so each one gets its own quote. To get one, drop us a line at info@mrmastic.co.uk and let us know what needs doing and where.
Are you insured?
Yes. We are fully insured, and we can confirm the details when we quote.
Do you work for landlords and businesses?
Yes, we do. Domestic, commercial and hotel work are all part of what we do, and we’re fully insured.
Can new window sealant be painted?
Silicone generally will not take paint. Let us know beforehand, and we will use a paintable product where it suits.
