Moray · Scotland
Fire-rated sealant in Bogmoor, Moray
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Bogmoor and across Moray. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Fire seals that have cracked with movement
- New service routes left unsealed after building work
- Damaged fire sealant left by other trades
About our fire rated sealant in Bogmoor
Bigger jobs can be worked through in stages, flat by flat or floor by floor, noting the locations and products as we go. That record is useful for your files and for whoever looks at the building next. We work on pipe & cable gaps, door frames and linear gaps, and the jobs we see most are gaps where walls meet ceilings or slabs and cracked or shrunken fire-rated sealant.
If you look after holiday lets, a guest house or a community building in or near Bogmoor, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Place
- Bogmoor (IV32)
- Wider area
- Moray
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.
What fire rated sealant looks like in Bogmoor
For seaside hotels, guest houses and holiday lets around Bogmoor, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
Around Bogmoor, as everywhere, fire rated sealant is only as good as the preparation behind it.
Bogmoor is about 4 miles west of Buckie, in Moray. If you need fire rated sealant in Bogmoor, please send an email to info@mrmastic.co.uk for a quick quote. We’re based in Crawley and cover Moray, Bogmoor included. Bogmoor is one of 58 places in Moray we cover for fire rated sealant. You can also see our page for Aberdeen, about 49 miles away.
All of IV32 is within our area for fire rated sealant. You’ll find streets such as Culriach and Bogmoor Road. We also cover the places around Bogmoor: Upper Dallachy (1 mile east), Nether Dallachy (1 mile north), Garmouth (2 miles north-west), Kingston (2 miles north-west) and Mosstodloch (2 miles south-west). Larger places within reach include Elgin (9 miles west), Buckie (4 miles east), Lossiemouth (9 miles north-west), Keith (9 miles south-east), Ashgrove (8 miles west) and Portknockie (9 miles north-east). For island and remote addresses, the job takes a little more planning.
What’s near Bogmoor
Other landmarks nearby include Seafield Hospital (3.8 miles east) and Fochabers Folk Museum (2.6 miles south). The countryside around Bogmoor includes The Lake.
What else we do in Bogmoor
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Sign-off of the building, which sits with building control or your assessor
- Walls or floors that weren’t built to resist fire
- Deciding what fire stopping a building needs
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before you book.
What we seal
- Door frames
- Service penetrations
- Flats & HMOs
- Pipe & cable gaps
- Linear gaps
- Plasterboard & masonry
What the job involves on each surface
Linear gaps
Some linear gaps have to cope with movement as well as fire. We choose a product and depth that suit the gap and the movement from the manufacturer’s details.
Door frames
Behind most architraves is a gap between frame and wall. We seal any open gap to the product’s tested details so the architrave can be refitted.
Common questions in Bogmoor
Do Scottish building rules affect fire-rated sealant work in Bogmoor?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Is Bogmoor in your area for fire rated sealant?
Yes, Bogmoor is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little.
Do you provide details of the products used?
Yes. We record the locations we’ve sealed and the products used.
Will the old sealant be removed?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.
Can I add another job to the visit?
Of course. Doing several areas at once is usually more efficient.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.
Is the work guaranteed?
Yes: twelve months. If anything is not right with the work within the year, let us know and we will sort it.
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Look in service cupboards and ceiling voids from time to time
- Take pictures of fire stopping before ceilings or boxing go back
- Store the list of sealed gaps with your building paperwork
- Allow for resealing whenever new services are run
Do not drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
Open gaps don’t only matter in a fire: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
What we are called out for in Bogmoor
Much fire stopping is hidden: in ceiling voids, service risers and behind boxing. Out of view, damage sits unnoticed until someone inspects.
The problems people usually mention when they call are:
- Open holes round services passing through fire walls
- Fire stopping disturbed by later work
- Gaps left after a refit or conversion
- Cracked or shrunken fire-rated sealant
Whether the job is in Bogmoor itself or nearby, the right material for each joint matters as much as a neat finish.
What your quote should include
- How hidden problems are handled
- The length of the guarantee
- How the colour is chosen
- Whether they’re fully insured
The process
When we arrive, we look over the joints with you first. We protect the surfaces around the joints before any work starts. Most jobs take anything from a few hours to several days, depending on how many gaps there are. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- Mention any parking rules near the property
- Let us know about earlier repairs to the joints
How to get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, send an email to info@mrmastic.co.uk.
Advice
What affects the quote in Bogmoor
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The number of rooms or windows
- The number and length of the joints
- Any mould that needs treating
- When we can work, for business premises
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- Where the job is, and your postcode
- Photos by email, if that is easy
- How we’d reach the joints
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work before giving you a price.