Moray · Scotland
Fire Rated Sealant in Portgordon
Fire rated sealant for Portgordon, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Unsealed gaps where pipes and cables go through a wall
- Door frames with gaps between frame and wall
- Fire seals that have cracked with movement
What sealant work can’t fix
A few problems are outside what sealant work can do:
- Problems with the door itself rather than the gap around the frame
- Big openings where sealant alone is not the tested solution
- Walls or floors that weren’t built to resist fire
If you are not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer before you book.
What we seal
- Service penetrations
- Linear gaps
- Pipe & cable gaps
- Plasterboard & masonry
- Flats & HMOs
- Door frames
Fire rated sealant in Portgordon, done properly
We do not assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. Typical jobs include fire seals that have cracked with movement and door frames with gaps between frame and wall, on linear gaps, pipe & cable gaps and service penetrations.
Work in a place like Portgordon is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.
Our work is backed for twelve months, in Portgordon and everywhere else we cover.
- Place
- Portgordon (AB56)
- Wider area
- Moray
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Workplaces and buildings in Portgordon
For seaside hotels, guest houses and holiday lets around Portgordon, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.
Managing a site like Buckie High School? Then fire-stopping around service openings should be restored whenever new services go in. In and around Portgordon, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Portgordon is about 2 miles south-west of Buckie, in Moray. We provide fire rated sealant to householders, landlords and businesses in Portgordon, as part of our work across Moray. Portgordon is one of 58 towns and villages in Moray where we work for fire rated sealant. Aberdeen is on our list too, about 48 miles from Portgordon.
Postcode districts we cover here for fire rated sealant: AB56. Fire rated sealant is available to properties on Station Road, Richmond Terrace and Crown Terrace and the roads around them. Other places close to Portgordon include Arradoul (1 mile east), Buckie (2 miles north-east), Upper Dallachy (2 miles south-west), Nether Dallachy (2 miles west) and Bogmoor (2 miles west). Larger places within reach include Elgin (11 miles west), Lossiemouth (11 miles west), Keith (9 miles south), Ashgrove (11 miles west), Portknockie (6 miles north-east) and Cullen (8 miles east). If you’re somewhere remote, a little more planning is needed, so mention it when you ask for a quote.
Around Portgordon
Well-known places in the area include Gordon Castle (3.9 miles south-west) and Seafield Hospital (1.4 miles east). Not far away are The Lake.
Landlords, agents and businesses in Portgordon
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
What we do, step by step
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from a few hours to several days, depending on how many gaps there are. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any previous sealing or DIY attempts
Getting a quote
To get a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.
Read more
What affects the quote in Portgordon
There’s no set price list. What we look at:
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
- How much old sealant there is and how hard it is to remove
- The amount of work
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
- Any access issues, like height or stairs
- The type of property
Need a quote? Please drop us a line at info@mrmastic.co.uk with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Portgordon: your questions answered
Can you do fire rated sealant in Portgordon?
Yes. Our work covers the whole of Scotland, and Portgordon is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job.
How do Scotland’s building regulations apply to fire-rated sealant in Portgordon?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Do you certify the fire stopping?
That isn’t something we state or certify. Your specification sets the requirement, and we fit a product whose tested details meet it, recording the locations and products.
Do I need to be at home?
It depends on the job. For work indoors, someone needs to let us in.
Do you carry out fire risk assessments?
No. Your fire risk assessor, designer or building control decides that. Our job is applying the sealant to their specification.
Where is Mr Mastic based?
We’re based in Crawley, and we cover South East England, London and all of Scotland.
Can you seal over the old sealant?
No. The old sealant always comes out first, so the new joint bonds to clean surfaces.
Nearby places to Portgordon
What else we do in Portgordon
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Surface by surface
Door frames
Frame gaps are generally hidden behind the architrave. Where it’s open, we seal it to the product’s details for that gap size so the architrave can be refitted.
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Loose material is removed so the sealant has a firm edge.
What happens if it’s left?
Fire-rated sealants need more care than everyday sealant. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why book with us
- Approved under the ARBOMaster scheme
- Rated 4.9 stars on Google
- One-year guarantee on every job
- Over 20 years’ experience
Read how sealant jobs are priced and customer reviews.