Perth and Kinross · Scotland
Logierait Remedial Sealant
Problem with your failed sealant joints in Logierait? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Caulk or the wrong sealant used in a wet area
- Movement joints that have split or pulled away
- Smears and lumps from a botched reseal
What the job involves on each surface
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, including the smears and film on surrounding tiles. Only a clean joint will take a new bead.
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, including the screen profile and tray edges.
Remedial sealant in Logierait
Remedial jobs in Logierait usually fall into a few patterns: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. We strip each one back and start from scratch. If you are dealing with decorators’ caulk around a bath or shower and torn expansion joints, we can help.
Being further from a city doesn’t change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. The journey and access are simply planned in advance.
You get a one-year guarantee, the same in Logierait as everywhere else we work.
- Location
- Logierait (PH9)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
FAQs for Logierait
Do you cover smaller places like Logierait?
Yes, Logierait is covered. Our work covers the whole of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you cover Logierait for remedial sealant?
Yes, Logierait is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We will tell you what we are using and why.
Are you fully insured?
Yes. We’re fully insured for every job we do.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. There’s normally a reason: sealant over sealant, movement or another leak, and we deal with the cause first.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Can you match the sealant colour?
We will suggest a colour to suit the surroundings, from white and clear to greys and other shades. The choice depends on the product the joint needs.
How it works
Good joint work is mostly preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a few hours for most joints, depending on how much old sealant has to come out. Outside jobs in Logierait need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
How to prepare
- Let us know about earlier repairs to the joints
- Mention any leaks or damp you’ve noticed
- Keep pets and children clear of the area while we work
Getting a quote
We don’t publish a price list. Instead, we give you a clear quote for your job. To get started, drop us a line at info@mrmastic.co.uk.
Advice
Landlord and commercial work in Logierait
Hotels need rooms back in use, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
We also work for property managers and facilities teams in Logierait and across Perth and Kinross. We can quote a run of properties together, and we’re fully insured.
How we quote for remedial sealant
The quote reflects the job in front of us. We look at:
- Mould in or behind the old joints
- When we can work, for business premises
- How many rooms, windows or areas are involved
- The number and length of the joints
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
What to tell us for a quote
Photos by email are helpful but not essential. Please mention:
- If it’s domestic, commercial or a hotel
- Whether it has been sealed before
- How we’d reach the joints
- Where the job is, and your postcode
Every job is quoted individually, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details and send photos if you have them.
How to look after the new joints
Looking after new joints is easy:
- Get the cause of a repeat leak found before resealing
- Keep an eye on the ceiling below the bathroom
- Never seal over old silicone
- Clean sealant with mild products only
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
A failing joint rarely gets better on its own. Every shower or downpour sends more water through, into whatever is behind or below. Sorting it early limits the damage.
Remedial sealant around Logierait
Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
If you let a flat or house near Pitlochry station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Logierait is about 14 miles west of Blairgowrie and Rattray, in Perth and Kinross. For remedial sealant in and around Logierait, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We cover Perth and Kinross from our Crawley base. Logierait is one of 107 towns and villages in Perth and Kinross we cover for remedial sealant. We also work in Dundee, around 29 miles away.
Postcode districts we cover here for remedial sealant: PH9. Whether your property is on Clais-an-Deor and Murray Terrace or a nearby road, our applicators can take on the job. Nearby, we also carry out remedial sealant in Ballinluig (1 mile north-east), Dowally (3 miles south-east), Grandtully (4 miles west), Little Ballinluig (4 miles west) and Port na Craig (4 miles north-west). Larger places within reach include Blairgowrie and Rattray (14 miles east), Rattray (14 miles east), Aberfeldy (7 miles west), Stanley (14 miles south-east) and Bankfoot (12 miles south-east).
What’s near Logierait
For rail, the closest station is Pitlochry station, roughly 4.3 miles north-west of the centre. Nearby you’ll also find Tom na Croiche (under half a mile north-east) and Pitlochry Community Hospital (4.3 miles north-west). The countryside around Logierait includes Loch Skiach.
Towns and villages near Logierait
More services for Logierait
Common problems we fix in Logierait
Water from somewhere else can ruin a good seal. A leaking valve, a failed waste or cracked grout feeds water behind the bead, so the silicone goes mouldy or lets go.
The most common problems we see are:
- Wide, uneven beads that look worse than the old ones
- Floor or wall movement joints that have failed
- Decorators’ caulk around a bath or shower
- Black mould underneath the bead
Homes close to Logierait Parish Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
What to look for in a quote
- Whether VAT is included
- Which sealant they’ll use, and why
- What happens if they find a problem under the old sealant
- Whether they’re fully insured
Should I try it myself first?
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.