Perth and Kinross · Scotland

Remedial sealant & repairs in Little Ballinluig, Perth and Kinross

Our applicators work in Little Ballinluig on removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.

  • Thick, messy sealant smeared over tiles
  • Leaks that keep coming back after resealing
  • Products that weren’t meant for the joint

Book remedial sealant in Little Ballinluig

How we handle remedial sealant in Little Ballinluig

Two decades of sealant work means we recognise most failures quickly. We’re fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. If you are dealing with products that weren’t meant for the joint and sealant that came away because the surface wasn’t prepared, we can put it right, whatever the surface.

Being further from a city doesn’t change the work: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.

All our work is covered by a 12-month guarantee, wherever you are in Perth and Kinross.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Place
Little Ballinluig (PH15)
Region
Perth and Kinross
Guarantee
One year on every job
Quote
A clear quote up front
Email
info@mrmastic.co.uk
Updated
26 October 2026

When to call us in Little Ballinluig

A lot of failed joints have been sealed over rather than replaced. New silicone can’t stick to the old bead, so the new layer peels, and damp and mould settle between them.

Keep an eye out for these signs:

  • Wide, uneven beads that look worse than the old ones
  • Kitchen joints letting water behind the worktop
  • Movement joints that have split or pulled away
  • Sealant that came away because the surface wasn’t prepared

In the older streets around Strathtay Parish Church, older homes can move a little, which is hard on rigid grout and tired sealant.

What to look for in a quote

  • What the cure time is
  • What product goes in the joint
  • Whether they’re fully insured
  • How hidden problems are handled

10 questions to ask before you book

Surface by surface

Worktops & kitchens

Kitchen joints often have grease and cleaning residue deep in them, so we spend extra time cleaning before resealing.

Mouldy bath & shower sealant

Black mould inside the bead will not scrub out. The sealant is cut out completely, the joint treated with a mould remover and dried ahead of a new anti-fungal bead.

How to look after the new joints

A little care helps the new joints last. We recommend:

  • Always have old sealant cut out, not covered
  • Look for stains below bathrooms now and then
  • Don’t wait for a small gap to become a leak
  • Keep the room well ventilated

If the joint ever needs renewing, have it cut out, not sealed over. New silicone does not bond to old.

If a joint has failed more than once, stop resealing it. Have someone find out why, or the next bead will go the same way.

Landlord and commercial work in Little Ballinluig

A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.

If you manage several properties in or around Little Ballinluig, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.

Common questions in Little Ballinluig

Will you come out to Little Ballinluig?

Yes. Little Ballinluig is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.

I let a flat near Pitlochry station. Can you help?

Yes, rental work is part of what we do. Just email us at info@mrmastic.co.uk and tell us about the property, and we’ll give you a clear quote.

What information do you need?

Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply email us at info@mrmastic.co.uk.

Do the sealants smell?

It depends on the product. Some smell for a while, some hardly at all.

Can you remove sealant that is been put over old sealant?

Yes. Stripping layered sealant takes longer than a normal reseal, but it’s what makes the new bead last.

Do you have insurance?

Yes. Full insurance covers our work, and we can confirm the details when we quote.

Do you do commercial work?

Yes. Hotels, offices and other businesses use us, and we are fully insured.

How long should I leave it?

That depends on the sealant used, so please follow the time we give you when we finish.

Quotes for remedial sealant in Little Ballinluig

There’s no set price list, because no two jobs are the same. What we look at:

  • The number and length of the joints
  • The product the joint needs
  • Any working-time requirements on site
  • How many rooms, windows or areas are involved

Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.

What we need to know

Photos help, but a description is a good start. Try to tell us:

  • Whether it’s a home or a business
  • What the problem is, such as mould, gaps, leaks or cracking
  • Where the job is, and your postcode
  • Access, such as stairs, a lift or height

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, drop us a line at info@mrmastic.co.uk.

What happens on the day

When we arrive, we look over the joints with you first, so you know exactly what we are doing. We protect the surfaces around the joints before any work begins. Most jobs take a few hours for a typical bath or shower, longer where several layers have been applied. For a place like Little Ballinluig, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. Surrounding tiles, trays and frames are protected first.
  2. Every layer of failed sealant is stripped out.
  3. We clean and degrease the joint and look for signs of movement or water.
  4. Once dry, a suitable sealant is applied and tooled.
  5. We give you the cure time and explain what caused the failure.

How to prepare

  • Mention any parking rules near the property
  • Plan for the work area to be out of bounds to pets and children
  • Try not to wet indoor joints just before the visit

Getting a quote

Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.

Get a quick quote

Advice

What we can’t put right

We won’t take on work that won’t last, so these are the limits:

  • A tray or worktop that needs refixing first
  • A cracked shower tray or bath (that needs repair or replacing)
  • A leaking trap, valve or supply pipe

Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before you book.

Joints and surfaces we work on

  • Shrunken worktop sealant
  • Botched or over-sealed joints
  • Failed movement joints
  • Leaking tray & enclosure joints
  • Expansion joints
  • Mouldy bath & shower sealant

Little Ballinluig homes and their sealant

Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that does not dry out.

Letting a property close to Pitlochry station? Then a joint that keeps failing is best fixed properly while the property is empty.

Little Ballinluig is about 17 miles west of Blairgowrie and Rattray, in Perth and Kinross. If you need remedial sealant in Little Ballinluig, please email us at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover Perth and Kinross, Little Ballinluig included. Across Perth and Kinross, we cover 107 places, and Little Ballinluig is one of them. For nearby work, see our Dundee page.

Every address in PH15 is covered for remedial sealant. Whether your property is on Aultbeag Road and Creag Eilid or anywhere close by, we can help. We also cover the places around Little Ballinluig: Grandtully (1 mile north-east), Port na Craig (4 miles north-east), Logierait (4 miles east), Aberfeldy (4 miles south-west) and Pitlochry (4 miles north-east).

Around Little Ballinluig

The closest station to Little Ballinluig is Pitlochry station, roughly 3.8 miles north-east of the centre. Well-known places in the area include Tom na Croiche (4 miles east) and Pitlochry Community Hospital (3.7 miles north-east). Not far away are Loch na Bà.

Map of Little Ballinluig © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job