Perth and Kinross · Scotland
Port na Craig Remedial Sealant
Failed sealant joints in Port na Craig need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Caulk or the wrong sealant used in a wet area
- Worktop sealant that has shrunk and split
- Leaks that keep coming back after resealing
Common problems we fix in Port na Craig
Water from somewhere else can ruin a good seal. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.
Common reasons people contact us include:
- Kitchen joints letting water behind the worktop
- Movement joints that have split or pulled away
- Black mould underneath the bead
- Decorators’ caulk around a bath or shower
Rented homes near Pitlochry station change hands often, and a joint that keeps failing is best fixed properly while the property is empty.
What your quote should include
- How hidden problems are handled
- Who does the work, and how experienced they are
- Is VAT in the price?
- Whether all the old sealant comes out first
Remedial sealant in Port na Craig, done properly
If a joint fails again and again, something is causing it. Movement, the wrong product or a leak from somewhere else will defeat even a perfect bead. We look for the cause before we reseal. We work on mouldy bath & shower sealant, leaking tray & enclosure joints and shrunken worktop sealant, and the jobs we see most are dark patches showing through the sealant and sealant peeling off a dusty or damp surface.
A bathroom in a place like Port na Craig gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
Whatever the size of the job, you get the same 12-month guarantee in Port na Craig and across Perth and Kinross.
- Location
- Port na Craig (PH16)
- Wider area
- Perth and Kinross
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How to look after the new joints
Simple care keeps the joints in good condition. Our advice:
- Use a soft cloth, not a scourer, on silicone
- Never seal over old silicone
- Report a tray that rocks or a worktop that lifts
- Check ceilings under showers for marks
Leave the new joint to cure fully before it gets wet or moves: usually around 24 hours, or as long as we advise.
If a joint has failed more than once, stop resealing it. Have someone find out why, otherwise the next attempt will fail too.
For landlords and businesses
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
What affects the cost of remedial sealant
You will get a clear quote before we start. It’s based on:
- Any mould that needs treating
- Whether old sealant or filler has to be cut out
- The product the joint needs
- Whether the work is at height
Combining jobs into one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. We’ll send you a clear quote for the lot.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- A few photos by email, if you can
- If it’s domestic, commercial or a hotel
- Any access issues, like height or stairs
- The address or postcode of the job
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
The process
There is not much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes a few hours, depending on how many layers have to come out from start to finish. Around Port na Craig, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Tell us if parking is tricky
- Keep children and pets away from the work area
Get a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work before giving you a price.
Advice
What remedial sealant looks like in Port na Craig
There are hotels and other places to stay in and around Port na Craig. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
If you live in an older home near Baptist Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them. If you look after a building such as Croftinloan School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Port na Craig is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Homes, rented property, offices and hotels in Port na Craig is covered for remedial sealant. Every job comes with our one-year guarantee. 107 places in Perth and Kinross are on our list, large and small. For nearby work, see our Dundee page, about 33 miles away.
Every address in PH16 is covered for remedial sealant. Whether your property is on Foss Road, Ferry Road and Bruach Lane or anywhere close by, we can help. You will find Port na Craig on the A924, so it’s easy for us to get to with everything needed for remedial sealant. If you are just outside Port na Craig, we cover Pitlochry (1 mile north), Moulin (1 mile north), Grandtully (3 miles south-west), Little Ballinluig (4 miles south-west) and Ballinluig (4 miles south-east).
Around Port na Craig
Locally, jobs take us to homes and businesses close to Faskally Forest and Dundarach Hotel, among other places. Port na Craig has its own railway station: Pitlochry station. Nearby you will also find Black Castle of Moulin (1 mile north-east) and Atholl Palace Museum (0.6 miles north-east). The countryside around Port na Craig includes Loch na Bà.
Also near Port na Craig
Other services in Port na Craig
What we cannot put right
To be straight with you, some problems need a different trade:
- Failed tanking or loose tiles behind the sealant
- Movement from fittings that are not supported
- A leaking trap, valve or supply pipe
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think.
What we seal
- Shrunken worktop sealant
- Expansion joints
- Failed movement joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
Questions from Port na Craig
Do you cover smaller places like Port na Craig?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work in hotels near Port na Craig?
Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.
Do you have insurance?
Yes. We’re fully insured.
Can old silicone be taken off without scratching the tiles?
Yes, with care. The old bead is cut and lifted with tools that suit the surface, then clean off the residue. Any existing damage is pointed out before work begins.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
How long should I leave it?
Most sealants are touch-dry well before they’re fully cured. We’ll tell you how long to leave the joint.
What do you need from me for a quote?
Tell us what needs doing and where. If we need more, we’ll ask.
What if the leak is not the sealant?
You’ll hear it from us. A cracked tray, faulty valve or leaking waste needs a different trade, and we will not reseal for the sake of it.
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.