Greater London · England
Remedial sealant & repairs in Cubitt Town, Greater London
Our applicators work in Cubitt Town on removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Sealant applied over old sealant that has lifted
- Mould trapped under a layer of silicone
- Leaks that keep coming back after resealing
Why it’s worth doing now in Cubitt Town
Repeat failures have a cause. Finding it, whether movement, water from elsewhere or an unsuitable product, ends the cycle. Converted houses in London often have a bathroom above someone else’s living room, so a small leak from tired sealant can mean a neighbour’s ceiling and a lot of disruption. Dealing with it early is far simpler.
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why book with us
- A sealant colour to suit the surroundings
- Over 20 years’ experience
- Trusted Arbo and Everbuild sealants
- We never seal over old sealant
Read what affects the cost and what customers say.
How we handle remedial sealant in Cubitt Town
Remedial work is what we do when sealant has failed or been done badly. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all have to come out. If you’re dealing with sealant that came away because the surface wasn’t prepared and black mould underneath the bead, we can help.
Much of London’s older housing is Victorian and Edwardian terraces, many of them now split into flats, and bathrooms were often squeezed into small rooms. A compact bathroom that steams up every day is hard on silicone and grout, and homes in Cubitt Town are no different.
Each job carries a 12-month guarantee, whatever its size.
- Location
- Cubitt Town (E14, SE10, E22)
- Region
- Greater London
- Guarantee
- 12 months on all our work
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
How it works
There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the work takes a few hours, depending on how many layers have to come out in most cases. In a London area like Cubitt Town, the main things to plan are parking and access: let us know about parking, the floor we will be working on and any lift or shared entrance.
- First we find out how and where the joint has failed.
- We strip the joint completely, removing any layers below.
- We clean the joint, treat any mould and let it dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- Let us know about earlier repairs to the joints
- Tell us about any water getting in
- Clear items away from the joints we are working on
How to get a quote
If you are in Cubitt Town and need remedial sealant, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Related advice
What the job involves on each surface
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, including the smears and film on surrounding tiles. Only a clean joint will take a new bead.
Mouldy bath & shower sealant
Black mould inside the bead won’t scrub out. The sealant is cut out completely, the joint treated with a mould remover and dried before anti-fungal sanitary silicone goes in.
When it isn’t the sealant
It helps to know what we can’t do too:
- Movement from fittings that aren’t supported
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Plumbing leaks behind walls or under trays
If you’re not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer.
Where we work in Cubitt Town
- Leaking tray & enclosure joints
- Failed movement joints
- Shrunken worktop sealant
- Expansion joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
Bathrooms and kitchens in Cubitt Town
London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, which is why it’s worth fixing early. Cubitt Town has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Homes close to Christ Church include some older properties, and walls and floors in older homes can move, and sealant and grout show it first. Letting a property close to Canary Wharf station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. Cubitt Town is in London, so parking needs planning: tell us about permits, visitor bays or off-street space when you book.
Cubitt Town is about 1 mile north of Greenwich, in Greater London. Jobs in Cubitt Town get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Cubitt Town is one of 764 places in Greater London where we work.
We cover every part of E14, SE10 and E22 for remedial sealant. If you need remedial sealant at a property on Undine Road, Amsterdam Road and Preston's Road or anywhere close by, our applicators can take on the job. Being close to the A1206, Cubitt Town is easy for our applicators to reach for remedial sealant. Nearby, we also carry out remedial sealant in North Greenwich (1 mile south-west), Isle of Dogs (1 mile south-west), Millwall (1 mile south-west), Maze Hill (1 mile south) and Greenwich (1 mile south). Within a short drive, we also cover London (4 miles west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (8 miles west), St Pancras (5 miles west) and Shoreditch (4 miles north-west).
What’s near Cubitt Town
Locally, jobs take us to homes and businesses close to Tower Hamlets College, Mudchute Park and Farm and Canary Wharf College 3. The closest station to Cubitt Town is Canary Wharf station, about 0.8 miles north-west. Other landmarks nearby include Greenwich Castle (1.4 miles south) and Poplar Hospital (1 mile north). For a walk, there’s Sue Godfrey Nature Park and Tower Hill.
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
For landlords and businesses
If you manage several properties in or around Cubitt Town, several properties can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Also near Cubitt Town
What else we do in Cubitt Town
What affects the cost of remedial sealant
The quote reflects the job in front of us. We look at:
- Working hours on commercial sites
- Whether there’s mould to deal with
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we will explain the quote if you ask.
What we need to know
There’s no need for technical detail. Just tell us:
- Where the job is, and your postcode
- Roughly how big the job is
- What’s wrong with the joints now
- Access, such as stairs, a lift or height
Every job is quoted individually. Just ring 0345 464 0079 or send us an email with the details and send pictures if you have them.
Common questions in Cubitt Town
Do you take on hotel work around Cubitt Town?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Do you work for landlords with property near Canary Wharf station?
Yes. We work for letting agents and landlords as well as homeowners. You can phone 0345 464 0079 or email us with the details for a clear quote.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Can you fix a reseal that hasn’t worked?
Yes. First we check whether the leak is the sealant at all, then strip and reseal the joints.
Can you remove old sealant without damaging the bath?
Yes. Careful removal is most of a remedial job, especially on acrylic, enamel and uPVC.
Can you take off two layers of silicone?
Yes. Both layers come out; new silicone does not bond to old silicone, which is why over-sealing fails.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
What if the leak isn’t the sealant?
We check for that before we reseal. If the fault is elsewhere, you will know before any work is done.