Greater London · England
Bathroom & kitchen resealing in Cubitt Town, Greater London
Bath, shower, basin, wet room, worktop and sink resealing for Cubitt Town, backed by a 12-month guarantee. Ask us for a quote.
- Shrunken sealant along the back of a worktop
- Lumpy, uneven sealant from a DIY attempt
- Sealant that has split, shrunk or peeled away
How we handle bathroom resealing in Cubitt Town
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Cubitt Town. We’re fully insured ARBOMaster approved applicators, and the work comes with a 12-month guarantee. If you have gaps between the worktop and the wall and smears of silicone across the tiles, we can put it right, whatever the surface.
London homes include a lot of flats, conversions and mansion blocks, so a bathroom is often directly above a neighbour’s ceiling. That makes worn sealant and cracked grout in Cubitt Town more than a cosmetic job.
Your job is guaranteed for a year, as with all our work.
- Place
- Cubitt Town (E14, SE10, E22)
- Wider area
- Greater London
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Why deal with it now?
A failed joint gets more costly to put right the longer it’s left. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, and that is a far bigger job than a reseal. In a London flat, a failed joint rarely stays your problem alone: water can reach the neighbours below, and gaps in fire-rated joints affect the whole building.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why us?
- An ARBOMaster approved applicator
- White, clear, grey or coloured to suit, where the product allows
- Full insurance on every job
- We never seal over old sealant
Read how sealant jobs are priced and our reviews.
What affects the cost of bathroom resealing
The quote reflects the job in front of us. We take into account:
- Access and height
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- Whether there’s mould to deal with
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What to tell us for a quote
Before you ask for a quote, have a think about:
- The problem you’ve noticed
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- A few pictures by email, if you can
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or email us.
Places near Cubitt Town
Also in Cubitt Town
Bathroom resealing around Cubitt Town
In a London flat, water from a failed bath or shower seal can reach the neighbours below, so tired sealant is best dealt with early. London has hard water, which leaves limescale on sealant, grout and taps, and it has to be cleaned off before new sealant goes in.
In the older streets around Christ Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them. For landlords with property near Canary Wharf station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. If you look after a building such as Cubitt Town Infants' School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Cubitt Town is about 1 mile north of Greenwich, in Greater London. Across the E14 area, we cover bathroom resealing for homes and businesses. Cubitt Town is one of 764 places in Greater London we cover for bathroom resealing.
We work across the E14, SE10 and E22 postcode area for bathroom resealing and the streets around it. If you need bathroom resealing at a property on Undine Road, Amsterdam Road and Preston's Road or a nearby road, our applicators can take on the job. With the A1206 close by, Cubitt Town is simple for us to get to for bathroom resealing. Other places close to Cubitt Town include North Greenwich (1 mile south-west), Isle of Dogs (1 mile south-west), Millwall (1 mile south-west), Maze Hill (1 mile south) and Greenwich (1 mile south). We also work in nearby towns such as London (4 miles west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (8 miles west), St Pancras (5 miles west) and Shoreditch (4 miles north-west).
Around Cubitt Town
Typical jobs here are in homes near Tower Hamlets College, Mudchute Park and Farm and Canary Wharf College 3, among other places. For rail, the closest station is Canary Wharf station, about 0.8 miles north-west. Nearby you will also find Greenwich Castle (1.4 miles south) and Poplar Hospital (1 mile north). For a walk, there’s Sue Godfrey Nature Park and Tower Hill.
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
How it works
There is not much for you to do on the day. Point us to the joints and we’ll get on with it. The job generally takes a morning or an afternoon for most single baths and showers, including the tidy-up. Parking in much of London is by permit or pay-and-display, so it helps to know what’s near you in Cubitt Town. A visitor permit or a nearby bay makes the visit run more smoothly.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Getting ready for the visit
- Try not to wet indoor joints just before the visit
- Mention any sign-in or site rules at work premises
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Advice
Cubitt Town questions
Can you help a landlord with a rental near Canary Wharf station?
Yes, we work for landlords and letting agents. You can call 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before any work starts.
Is parking a problem for a job in Cubitt Town?
London parking needs a little planning, so let us know about permits, bays or a driveway when you book. The visit is then planned around what’s available.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We’ll tell you what we are using and why.
Will you leave a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
Can you just seal over the old silicone?
No. Fresh silicone cannot stick to the old bead, so it lifts and traps water and mould underneath. All the old sealant comes out first.
Can you do several jobs on one visit?
Yes. Several rooms, windows or areas can go on one quote.
My sealant has gone black. Can you sort it?
Yes, we can. We strip the bead, treat the joint and lay new anti-fungal silicone.
Where do you work from?
Our base is Crawley. Our area covers South East England, London and Scotland.
Keeping the joints in good condition
After the cure time, these simple habits help:
- Dry worktop joints after washing up
- Keep an eye on the corners, where splits start
- Avoid abrasive pads on the sealant
- Move toiletries away from the joint
Check the sealant now and then. Small splits and lifting ends are easy to catch early, so if something does not look right, just call 0345 464 0079 or drop us an email.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out. Catching it early keeps it a simple reseal.
When something else is needed
We will always be straight with you, so here’s what new sealant will not do:
- A tray or bath that is cracked through
- Cracked or missing grout between tiles (that’s regrouting)
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly before you book.
What we seal
- Baths
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Kitchen worktops & upstands
- Sinks & splashbacks
Surface by surface
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They’re resealed with anti-fungal sanitary silicone, and our work is on the visible joints only.
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. We reseal the visible edge of the sink where it has failed.