Greater London · England
Fire-rated sealant in Cubitt Town, Greater London
Fire rated sealant for Cubitt Town and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Open gaps behind door architraves
- Open holes round services passing through fire walls
- Joints picked up in a fire-stopping survey
About our fire rated sealant in Cubitt Town
We can work through a building room by room or floor by floor, noting the locations and products as we go. It gives you a list to keep with the building’s fire safety documents. Common call-outs are for standard silicone or caulk in a fire-stopping gap and gaps around pipes and cables through fire-resisting walls, on plasterboard & masonry, service penetrations and flats & HMOs.
Commercial work in London comes with its own logistics: loading restrictions, building rules and tight access. For a building in Cubitt Town, we agree timings and access before anything starts.
Every job is covered by a one-year guarantee, wherever you are in Greater London.
- Location
- Cubitt Town (E14, SE10, E22)
- Wider area
- Greater London
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Workplaces and buildings in Cubitt Town
Cubitt Town has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
As a London address, Cubitt Town can be tricky for parking: tell us about permits, visitor bays or off-street space when you book. If you let a flat or house near Canary Wharf station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Cubitt Town is about 1 mile north of Greenwich, in Greater London. Whether you’re in the middle of Cubitt Town or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Cubitt Town is one of 764 places in Greater London where we work for fire rated sealant.
Postcode districts we cover here for fire rated sealant: E14, SE10 and E22. If you need fire rated sealant at a property on Undine Road, Amsterdam Road and Preston's Road or a nearby road, our applicators can take on the job. Main roads around Cubitt Town include the A1206, which makes travel easy. If you are just outside Cubitt Town, we cover North Greenwich (1 mile south-west), Isle of Dogs (1 mile south-west), Millwall (1 mile south-west), Maze Hill (1 mile south) and Greenwich (1 mile south). Further out, we also cover London (4 miles west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (8 miles west), St Pancras (5 miles west) and Shoreditch (4 miles north-west).
Landmarks near Cubitt Town
Around Cubitt Town, our work takes us to homes and buildings near Tower Hamlets College, Mudchute Park and Farm and Canary Wharf College 3. The closest station to Cubitt Town is Canary Wharf station, roughly 0.8 miles north-west. A little further out are Greenwich Castle (1.4 miles south) and Poplar Hospital (1 mile north). Green spaces nearby include Sue Godfrey Nature Park and Tower Hill.
When it is not the sealant
A few problems are outside what sealant work can do:
- Fire risk assessments, which need a qualified assessor
- A wall that is not a fire-resisting element to begin with
- Sign-off of the building, which sits with building control or your assessor
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before you book.
Where we work in Cubitt Town
- Pipe & cable gaps
- Linear gaps
- Plasterboard & masonry
- Flats & HMOs
- Door frames
- Service penetrations
Different surfaces, different methods
Plasterboard walls
We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.
Flats and HMOs
In flats and HMOs, the walls and floors between homes and common areas need sealing where services pass through. We work through the gaps on your assessment.
Common problems we fix in Cubitt Town
Sealant applied too thin, without the backing its detail needs, or onto dust will not perform as it was tested. Rushed fire stopping is common particularly when it was the last job before handover.
Most people get in touch when they notice one of these:
- Damaged fire sealant left by other trades
- Unsealed gaps around fire door frames
- Gaps around pipes and cables through fire-resisting walls
- Ordinary sealant used where a fire-rated product was needed
Schools such as Cubitt Town Infants' School are buildings too, and fire-stopping around service openings should be restored whenever new services go in.
What to look for in a quote
- Whether the sealant suits the joint
- What guarantee comes with the work
- Whether all the old sealant comes out first
- Which colour the sealant will be
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll quote.
Also near Cubitt Town
Other services in Cubitt Town
What we do, step by step
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for a handful of gaps, and longer for a whole building. In Cubitt Town, as in most of London, parking needs a little planning. It helps if you can point us to a visitor permit or a bay close to the door.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Preparing for the visit
- Mention if the joints have been sealed before
- For business premises, tell us about site rules or sign-in
- Mention any parking rules near the property
How to get a quote
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Advice
FAQs for Cubitt Town
Do you work in hotels near Cubitt Town?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Is parking a problem for a job in Cubitt Town?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. That way the visit can be planned around it.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all.
Do you come to Cubitt Town?
Yes. We cover Cubitt Town, as part of our work across South East England, London and Scotland. To book, ring 0345 464 0079 or drop us an email.
Do you provide details of the products used?
Yes. We record the locations we’ve sealed and the products used.
Do you guarantee your work?
Yes, for a year. If there’s a problem with our work in that time, tell us and we will put it right.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator.
Aftercare tips
A little care helps the new joints last. We recommend:
- Include fire stopping when you schedule refits
- Keep photos of seals that will be hidden
- Make resealing part of every contractor’s brief
- Store the list of sealed gaps with your building paperwork
Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. Later work is a common cause of damaged fire stopping.
Open gaps do not only matter in a fire: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.