Orkney Islands · Scotland
Remedial sealant & repairs in Abune-the-Hill, Orkney Islands
Remedial sealant for Abune-the-Hill and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Dark patches showing through the sealant
- Over-sealed joints coming away
- Sealant that came away because the surface wasn’t prepared
Remedial sealant in Abune-the-Hill
A movement joint stops working when its sealant splits or sets hard. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. If you have torn expansion joints and wide, uneven beads that look worse than the old ones, we can put it right.
Bathrooms in smaller places like Abune-the-Hill work just as hard as those in the cities. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
The work is covered for a year after we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.
- Location
- Abune-the-Hill (KW17)
- Region
- Orkney Islands
- Cover
- 12 months on all our work
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Report a tray that rocks or a worktop that lifts
- Don’t point over movement joints
- Never seal over old silicone
- Keep the room well ventilated
Do not let anyone seal over it later. Over-sealing is how many remedial jobs start.
A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. Resealing while the edges are sound is simpler.
Bathrooms and kitchens in Abune-the-Hill
Abune-the-Hill is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Island jobs need planning around ferries and the weather, so the more notice, the better.
Whether the job is in Abune-the-Hill itself or nearby, the right material for each joint matters as much as a neat finish.
Abune-the-Hill is about 15 miles north-west of Kirkwall, in the Orkney Islands. Wherever you are in the KW17 postcode area, we cover remedial sealant for homes and businesses. We cover 51 towns and villages across the Orkney Islands.
Every address in KW17 is within our area for remedial sealant, from the main roads to the quietest streets. We also cover The Barony (2 miles west), Evie (5 miles east), Dounby (5 miles south), Skeabrae (5 miles south) and Scarwell (6 miles south-west). Island and remote addresses take a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
Near you in Abune-the-Hill
Other landmarks nearby include Earl's Palace (3 miles west) and Kirbuster Farm Museum (2 miles south). Not far away are Birsay moors RSPB Reserve and Hundland Hill.
Also in Abune-the-Hill
Why act early in Abune-the-Hill
Leaks that are left keep doing damage out of sight: wet floors, stained ceilings and swollen worktops. By comparison, sorting the joint is quick. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first and send you a clear quote before work begins.
Why Abune-the-Hill customers choose us
- Colour agreed with you before we start
- Quality sealants from Arbo and Everbuild
- White, clear, grey or another colour, product permitting
- A sealant colour to suit the surroundings
See our cost guide and customer reviews.
Can I do it myself?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
How the visit works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for a typical bath or shower, longer where several layers have been applied. For a place like Abune-the-Hill, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- On commercial sites, let us know about site rules
- Mention any tricky access
Getting a quote
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Advice
Landlord and commercial work in Abune-the-Hill
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
What affects the quote in Abune-the-Hill
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Any working-time requirements on site
- The product the joint needs
- Access and height
- The number and length of the joints
Doing several joints on one visit is generally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Asking for a quote
Photos by email are helpful but not essential. Try to tell us:
- The rough size of the job
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
- If someone has resealed it before
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we’ll take it from there.
Do you need remedial sealant in Abune-the-Hill?
Some joints fail because water is reaching them from behind. A leaking valve, a failed waste or cracked grout feeds water behind the bead, so the silicone goes mouldy or lets go.
Most people get in touch when they notice one of these:
- Black mould underneath the bead
- Sealant applied over old sealant that has lifted
- Wide, uneven beads that look worse than the old ones
- Torn expansion joints
In and around Abune-the-Hill, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
What your quote should include
- How the colour is chosen
- Who does the work, and how experienced they are
- Whether VAT is included
- When the joint can take water or movement
FAQs for Abune-the-Hill
Can you do remedial sealant in Abune-the-Hill?
Yes, Abune-the-Hill is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we will give you a clear quote.
What guarantee comes with remedial sealant in Abune-the-Hill?
Every job comes with our 12-month guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Will it make a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Do you take out the old sealant first?
Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Is there any odour?
It depends on the product. Some products have a noticeable smell, others very little.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us.
My shower still leaks after a reseal. Can you sort it?
Yes, generally. We check it’s the sealant and not the tray, valve or waste, then the joints are stripped and resealed.