Orkney Islands · Scotland
Glazing & conservatory sealant in Abune-the-Hill, Orkney Islands
We cover Abune-the-Hill for glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly.
- Sealant that was laid over old silicone and failed
- Water escaping where a screen meets the wall
- Cracked silicone between glass panels
Glazing silicone in Abune-the-Hill, done properly
We don’t replace glass and a misted double-glazed unit needs a glazier. What we do is the silicone around the glass and that’s often where the water gets in. If you have conservatory leaks at frame and glazing joints and cracked silicone between glass panels, we can help, whatever the surface.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses, many standing in the open. Exposed frames and sills take the full force of wind-driven rain, so the mastic there works hard.
Every job is covered by our 12-month guarantee.
- Location
- Abune-the-Hill (KW17)
- Region
- Orkney Islands
- Cover
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Common problems we fix in Abune-the-Hill
Shower screen silicone gets wet every day. Mould gets into it and the joint starts to lift.
The most common problems we see are:
- Sealant that was laid over old silicone and failed
- Water tracking down the inner face of the glass
- Failed sealant around rooflight glass
- Shower screens leaking along the wall or tray
For jobs in and around Abune-the-Hill, choosing the right material for each joint is as important as a tidy finish.
What to look for in a quote
- What guarantee comes with the work
- Are they insured?
- Whether you can choose the colour
- Who turns up on the day
What happens if it’s left?
Glazing joints need a sealant made for the job. General-purpose sealant from a DIY shop may not suit glass or the frame, so we use neutral-cure glazing silicone. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Why us?
- Old sealant always removed completely
- Arbo and Everbuild products
- 4.9 on Google from 180+ five-star reviews
- Homes, businesses and hotels
Take a look at our cost guide and customer reviews.
Abune-the-Hill questions
Is Abune-the-Hill within the area you cover?
Yes. Abune-the-Hill is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
Can you do glazing silicone in Abune-the-Hill?
Yes. Our work covers the whole of Scotland, and Abune-the-Hill is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing, and we will send you a clear quote.
Do you have insurance?
Yes. We’re fully insured, with over 20 years’ experience in sealant work.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
Do you work for landlords and businesses?
Yes, we do. We work in homes, commercial premises and hotels.
Can you match the sealant colour?
We will suggest a colour to suit the surroundings. The product needed can limit the range.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll explain our choice.
More services for Abune-the-Hill
Surface by surface
Glass-to-glass joints
Glass-to-glass joints depend entirely on the sealant. It must be clean, neat and well bonded.
Glass-to-frame joints
Old sealant is removed carefully from the glass and reseal with glazing silicone.
Aftercare tips
A little care helps the new joints last. We recommend:
- Stick to mild cleaners on glass
- Ventilate the conservatory to cut condensation
- Get a new leak looked at quickly
- Look over the glazing joints once a year
Clear the conservatory gutters regularly so water doesn’t back up against the seals. Overflowing gutters can cause leaks of their own.
Conservatory leaks rarely stay small. Water runs along frames and down walls so it’s best dealt with straight away.
How it works
Every visit runs the same way: we check the joints, protect the area around them, do the work and tidy away. It generally takes a few hours for most jobs. Outside jobs in Abune-the-Hill need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.
- We trace the leak and confirm it’s a sealant joint.
- We remove the old sealant carefully.
- The joint is cleaned and degreased.
- A neutral-cure glazing silicone is applied and tooled.
- We check the finished joints and test with water where it’s safe.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Tell us about any previous sealing or DIY attempts
- Keep children and pets away from the work area
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you are ready, send an email to info@mrmastic.co.uk.
Related advice
Honest limits
In fairness, there are a few things sealant won’t fix:
- A sagging or failing conservatory roof
- Glass that needs replacing
- Leaks from the roof covering or flashing (a roofer’s job)
If you’re not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before booking.
Joints and surfaces we work on
- Glass-to-frame joints
- Rooflights
- Conservatory frames
- Shower screens
- Glass-to-glass joints
- Glass balustrade bases
Windows and doors in Abune-the-Hill
Abune-the-Hill is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on glazing joints and frame seals, especially on the side facing the sea. Work on the islands has to be planned around ferry crossings and the weather, so the more notice, the better.
Around Abune-the-Hill, as everywhere, glazing silicone is only as good as the preparation behind it.
Abune-the-Hill is about 15 miles north-west of Kirkwall, in the Orkney Islands. Homes, rented property, offices and hotels in Abune-the-Hill is covered for glazing silicone. The work is guaranteed for a year. 51 places in the Orkney Islands are on our list, large and small.
Every address in KW17 is covered for glazing silicone, from the main roads to the quietest streets. Nearby, we also carry out glazing silicone in The Barony (2 miles west), Evie (5 miles east), Dounby (5 miles south), Skeabrae (5 miles south) and Scarwell (6 miles south-west). For island and remote addresses, a little more planning is needed, so let us know when you get in touch.
Local landmarks in Abune-the-Hill
Nearby you’ll also find Earl's Palace (3 miles west) and Kirbuster Farm Museum (2 miles south). Not far away are Birsay moors RSPB Reserve and Hundland Hill.
What affects the cost of glazing silicone
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- The number of rooms or windows
- The type of sealant required
- How much old sealant there is and how hard it is to remove
- How easy the joints are to reach
What you pay reflects the work, not guesswork. That’s why we ask a few questions first.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- A few pictures by email, if you can
- Whether it has been sealed before
- How we’d reach the joints
For glazing silicone in Abune-the-Hill, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.