Hampshire · England
Regrouting in Soake
Our applicators work in Soake on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly.
- A grout colour that no longer suits the room
- Shower grout that has worn away
- Grout stained black or orange that won’t clean
How we handle regrouting in Soake
A grout colour change can freshen a room without retiling. You might go from white to grey or back again. Just mention the colour you’d like when you ring 0345 464 0079 or send us an email. We work on kitchen splashbacks, tiled floors and wet rooms, and people most often call us about grout that stays dark however much it’s cleaned and old grout in a dated colour.
In a village or hamlet like Soake, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
All our work is covered by our one-year guarantee, wherever you are in Hampshire.
- Place
- Soake (PO7)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What else we do in Soake
Aftercare tips
Simple care keeps the joints in good condition. Our advice:
- Check the corner silicone every few months
- Give the walls a quick rinse after use
- Clean grout with a mild bathroom cleaner
- Run the extractor fan during and after a shower
Leave the area unused for as long as we advise, so it can harden properly. After that, rinse the tiles after showering and keep the room ventilated.
Grout that stays dark after cleaning is starting to fail. Regrouting at this stage is straightforward while the tiles are still sound.
For landlords and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
What regrouting looks like in Soake
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Bedhampton station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. For site and facilities teams at buildings such as Denmead Junior School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Soake is about 1 mile north-west of Waterlooville, in Hampshire. Whether you’re in the middle of Soake or further out, regrouting is available for homes and businesses alike. Our Hampshire coverage runs to 683 places, and Soake is one of them. Portsmouth is on our list too, about 6 miles from Soake.
Jobs for regrouting in PO7 is quoted and booked the same way as anywhere else. If you need regrouting at a property on Soake Road and Hambledon Road or anywhere close by, we can help. Other places close to Soake include Furzeley Corner (1 mile south-west), Hart Plain (1 mile east), Cowplain (1 mile east), Waterlooville (1 mile south-east) and Purbrook Heath (2 miles south). We also work in nearby towns such as Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Around Soake
Locally, jobs take us to homes and businesses close to The Mead End pub and The Cowplain School and the streets around them. Soake’s nearest station is Bedhampton station, roughly 3.7 miles south-east of the centre. Nearby you’ll also find Clanfield Earthwork (4.7 miles north-east) and Queen Alexandra Hospital (3.2 miles south). Not far away are Southmoor Nature Reserve and Portsdown Hill.
How the job changes by surface
Bathroom wall tiles
Splash areas around basins and baths stain first. We can do part of a wall or all of it.
Bathroom floors
Regrouting a floor brightens the whole room. Floor-to-wall and bath joints are sealed, not grouted.
The process
There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes a few hours for a shower enclosure, longer for a whole room. For a village or hamlet like Soake, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the tiles for any that are loose or hollow.
- The old grout comes out to a consistent depth, without damaging the tiles.
- The joints are vacuumed and cleaned.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- We reseal the internal corners and edges with silicone.
How to prepare
- Tell us about any water getting in
- Mention any sign-in or site rules at work premises
- Mention any tricky access
Getting a quote
For regrouting in Soake, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Read more
What affects the cost of regrouting
For a quick quote, just ask. What matters most is:
- The number and length of the joints
- Which sealant suits the joint
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs. Ask us for a quote and we will go through it with you.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- If someone has resealed it before
- How many joints, rooms or windows are involved
- How we’d reach the joints
- The problem you’ve noticed
Need a quote? Please phone 0345 464 0079 or email us with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Why deal with it now?
Once grout cracks, water can get behind the tiling. Leave it, and the adhesive or the wall behind can suffer, and then you are looking at retiling. Sorting it early keeps the job simple. In a small place like Soake, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first.
Why book with us
- Sanitary silicone with an anti-fungal additive in wet areas
- Fully insured
- Every job guaranteed for a year
- Arbo and Everbuild products
Take a look at our cost guide or what customers say.
Common questions in Soake
Is Soake in your area for regrouting?
Yes. We work across London and the South East, and Soake is part of that. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we’ll give you a clear price.
Is Soake within the area you cover?
Yes. Soake is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you regrout just the shower?
Yes, that is common. Shower grout tends to go before the rest, so many people regrout just that part.
Are you insured?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and we clear up when we are done.
Where do you work from?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
Which products do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Do you work for hotels and businesses?
Yes. Larger jobs can be planned room by room or area by area to suit the site.