Hampshire · England
Window & door mastic in Soake, Hampshire
Window mastic for Soake, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Cold air getting in at the frame edge
- Gaps between the frame and the inside reveal
- Water coming in at the bottom corners of a door
Window mastic for homes and businesses in Soake
If you can feel air around a shut window, the gap is often at the frame. Resealing that joint can make a room feel noticeably less draughty. Where the air is getting in through the window itself, we’ll say so. We’re often asked to deal with old mastic that has gone black or come away and a bead that doesn’t match the frame, across window sills, timber windows & doors and composite doors.
Mastic can only go onto a dry, clean joint, so window work in Soake is booked around the forecast. Let us know about access to all the frames, upstairs ones included.
A 12-month guarantee comes as standard.
- Where
- Soake (PO7)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
If you’ve already had a go yourself, that is fine. We cut it out and start again.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
What happens on the day
Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for a handful of frames, longer for a whole house. Somewhere as small as Soake, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, we go round the frames with you and agree the list.
- The old mastic is cut out and scraped back to clean surfaces.
- Deep gaps get closed-cell backing rod to set the depth.
- A flexible exterior sealant is applied in a colour to suit the frame.
- We tool each bead neatly and check every joint is closed.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Move anything stored near the joints
- Tell us if parking is tricky
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
Read more
Surface by surface
Composite doors
Front doors take the weather head on, and the top and bottom corners tend to fail first. We pay most attention there.
Aluminium frames
Aluminium moves with heat, and the frames are often slimmer than uPVC. A neat, narrow bead in a colour to match suits the frame.
What affects the quote in Soake
Jobs vary more than people expect. The main factors:
- The type of sealant required
- How many areas need sealing
- How much there is to do
- How easy the joints are to reach
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.
Asking for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- How we’d reach the joints
- Any previous sealing or DIY work
- What the problem is, such as mould, gaps, leaks or cracking
- Where the job is, and your postcode
Asking for a quote is easy: let us know what needs doing and where. Photos by email help us understand the job, and we will come back to you with a quote.
Common questions in Soake
Is Soake in your area for window mastic?
Yes, Soake is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we will give you a clear quote.
I let a flat near Bedhampton station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.
Where is Mr Mastic based?
We are based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before resealing.
Is there any odour?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Are you insured?
Yes. We are fully insured.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
Is the new sealant paintable?
Not if it’s silicone. Tell us your decorating plans and we will pick a sealant to suit.
Landlord and commercial work in Soake
If you manage several properties in or around Soake, several properties can go on one quote. Send us the addresses and the work at each.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Soake homes and the weather
The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you let a flat or house near Bedhampton station, cracked frame mastic tends to show up as a draught or damp complaint, so it’s worth checking between lets. If you look after a building such as Denmead Junior School, the mastic around its windows and doors needs looking after like any other building’s.
Soake is about 1 mile north-west of Waterlooville, in Hampshire. From the centre of Soake to the outskirts, window mastic is available for homes and businesses alike, from flats and houses to offices and hotels. Soake is one of 683 towns and villages in Hampshire where we work. There’s also a page for Portsmouth, roughly 6 miles from Soake.
Here we cover the PO7 postcode area for window mastic. Whether your property is on Soake Road and Hambledon Road or anywhere close by, our applicators can take on the job. We also cover the places around Soake: Furzeley Corner (1 mile south-west), Hart Plain (1 mile east), Cowplain (1 mile east), Waterlooville (1 mile south-east) and Purbrook Heath (2 miles south). Larger places within reach include Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Near you in Soake
In Soake, that means homes and buildings near The Mead End pub and The Cowplain School, among other places. The nearest railway station is Bedhampton station, about 3.7 miles south-east. Nearby you’ll also find Clanfield Earthwork (4.7 miles north-east) and Queen Alexandra Hospital (3.2 miles south). Not far away are Southmoor Nature Reserve and Portsdown Hill.
Also in Soake
How to look after the new joints
A little care helps the new joints last. Our advice:
- Air rooms to keep condensation down around windows
- Repaint timber before it’s bare
- Check the mastic once a year
- Make sure the drainage slots are not blocked
Wipe the frames with soapy water when you clean the windows, and keep solvents and harsh chemicals off the joint.
Water gets in quietly when mastic fails. You might not see it until plaster blows or a damp patch appears inside. Catching it early keeps the fix to a reseal.
Honest limits
New sealant cannot fix everything, and we will tell you before work begins. It won’t solve:
- Penetrating damp from a failed cavity tray or render
- Soft or decayed wood in the frame
- Faulty window hardware
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly before you book.
What we seal
- Window sills
- Composite doors
- Aluminium frames
- uPVC windows
- Patio & French doors
- Timber windows & doors