Hampshire · England

Floor & skirting joints in Soake, Hampshire

Floor joint sealing for Soake and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.

  • Open joints that fill with dirt
  • Failed joint filler in concrete floors
  • Cracked caulk along skirting in bathrooms and kitchens

Floor joint sealing for Soake homes and businesses

About our floor joint sealing in Soake

In commercial and industrial units, concrete floor joints take a hammering from wheels and traffic. Each is resealed with a floor-joint product suited to what runs over it. We’re often asked to deal with rigid edge joints in tiled floors and skirting caulk that keeps splitting, across tiled floors, thresholds and commercial floors.

Work in a small place like Soake just needs the journey and access planning, and once on site, the job is the same as anywhere.

We stand behind the work with a one-year guarantee, so you’re covered after we’ve gone.

The Mr Mastic team in navy uniforms in front of three Mr Mastic vans
Location
Soake (PO7)
Region
Hampshire
Guarantee
12 months on all our work
Quote
A clear price before work begins
Call
0345 464 0079
Updated
26 October 2026

Signs you need floor joint sealing in Soake

Some floors were never given a perimeter gap or movement joint. It pushes against the walls and skirting as it expands.

Common reasons people contact us are:

  • Caulk that has cracked where the floor moves
  • Grout used at the floor edge instead of sealant
  • Failed joint filler in concrete floors
  • Floor edges that trap water and grime

Rented homes near Bedhampton station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.

Comparing quotes

  • How hidden problems are handled
  • What insurance they hold
  • Which colour the sealant will be
  • How much experience the applicator has

How to choose a mastic man

What affects the quote in Soake

We quote each job individually. These are the things that affect it:

  • Whether there’s mould to deal with
  • Access and height
  • The old material and how stubborn it is
  • The size of the job

Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.

What to tell us for a quote

Photos by email are helpful but not essential. Please mention:

  • The problem you’ve noticed
  • Whether it’s a home or a business
  • Photos by email, if that’s easy
  • Where the job is, and your postcode

Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved.

Different surfaces, different methods

Skirting boards

On painted skirting, we can use a flexible sealant that takes paint. Where water is involved, silicone is the better choice.

Thresholds

A threshold is where floors and frames meet. We seal them with a flexible sealant that suits both sides.

Joints and finishes in Soake homes

Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.

If you look after a building such as Denmead Junior School, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.

Soake is about 1 mile north-west of Waterlooville, in Hampshire. Jobs in Soake get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Our area takes in 683 places across Hampshire, large and small. Portsmouth is on our list too, about 6 miles from Soake.

Here we cover the PO7 postcode area for floor joint sealing. Local streets include Soake Road and Hambledon Road, all of which we cover. Other places close to Soake include Furzeley Corner (1 mile south-west), Hart Plain (1 mile east), Cowplain (1 mile east), Waterlooville (1 mile south-east) and Purbrook Heath (2 miles south). Within a short drive, we also cover Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).

Near you in Soake

We work in homes and buildings around The Mead End pub and The Cowplain School, among other places. The closest station to Soake is Bedhampton station, about 3.7 miles south-east of the centre. A little further out are Clanfield Earthwork (4.7 miles north-east) and Queen Alexandra Hospital (3.2 miles south). For a walk, there’s Southmoor Nature Reserve and Portsdown Hill.

Map of Soake © OpenStreetMap contributors

Why it’s worth doing now in Soake

Waiting until the next redecoration can mean a winter of draughts and dirt in the gaps. Sealing them now is a short job in most rooms. Around Soake, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we’ll explain what it covers.

Why us?

  • Fully insured
  • More than 20 years in sealant work
  • Sanitary silicone with an anti-fungal additive in wet areas
  • A 12-month guarantee on all work

Read how sealant jobs are priced or customer reviews.

Work for landlords, hotels and businesses

From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.

Can I do it myself?

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.

How it works

Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes a few hours, depending on the length of joint. In a small place like Soake, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We start by looking at the floor, the gap and the traffic, then choose the product.
  2. Whatever is in the joint now, whether caulk, grout or sealant, comes out.
  3. The joint is cleaned, vacuumed and backed where depth needs controlling.
  4. The sealant goes in, chosen for the floor and coloured to suit it.
  5. We tool the joint neatly and tell you when it can be walked on and cleaned.

How to prepare

  • Let us know if you’ve seen damp or leaks
  • Clear items away from the joints we are working on
  • Let us know about earlier repairs to the joints

How to get a quote

There’s no standard price list. Instead, we give you a clear quote for your job. To get started, call 0345 464 0079 or drop us an email.

Get a quick quote

Advice

Soake questions

Can you do floor joint sealing in Soake?

Yes, Soake is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.

Do you work for landlords with property near Bedhampton station?

Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear price.

Which products do you use?

It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.

Will the old sealant be removed?

Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.

Can you quote for more than one area?

Yes, we can. More than one area can be quoted together.

How long does the job take?

That depends on the amount of work, but most jobs take a few hours, depending on the length of joint. We’ll give you a better idea when we quote.

Do you seal warehouse floor joints?

Yes. We clean out the joints and reseal them with a product suited to the floor. Tell us what runs over the floor when you ask for a quote.

When can I walk on the floor?

We give you a cure time for each joint. Feet are normally fine first, then mopping, then heavy wheels.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job