Hampshire · England

Soake Commercial Sealant

We cover Soake for sealant work for offices, hotels, washrooms and commercial buildings. Old material cut out, joints cleaned and sealed neatly.

  • Leaking joints in shower rooms and changing areas
  • Rental bathrooms that need resealing between tenants
  • Water marks on ceilings under bathrooms

Commercial sealant for Soake homes and businesses

Aftercare tips

After the cure time, these simple habits help:

  • Include the silicone on your room checklists
  • Schedule work around occupancy
  • Leave squeegees in busy showers
  • Don’t leave a failed joint until the next refurbishment

Extract fans need to work. In internal bathrooms, a weak or broken fan lets moisture linger, and that’s what keeps mould away.

In a commercial building, a leak can quickly spread beyond one room: into ceilings below, walls next door and service voids. Early resealing keeps it from getting that far.

How we handle commercial sealant in Soake

We fit the work around your building. We can work room by room, floor by floor or in batches, and out-of-hours work or early starts can be arranged. If you have large numbers of bathrooms needing the same work and worktop sealant that has shrunk and stained, we can help.

For holiday lets, converted business premises or a community building near Soake, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.

There’s a 12-month guarantee on every job.

Location
Soake (PO7)
Region
Hampshire
Guarantee
A year, on every job
Quotes
A clear quote up front
Phone
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall

Landlord and commercial work in Soake

We also work for property managers and facilities teams. Several sites can be quoted together.

Letting agents and landlords in Soake can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.

How the visit works

Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes anything from a few hours to several days, depending on the number of rooms and we leave things clean and tidy. Somewhere as small as Soake, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We start by looking at the rooms and agreeing what’s needed.
  2. Working hours are agreed, including early starts or out-of-hours work where it can be arranged.
  3. Areas are protected and the failed sealant removed.
  4. Once dry, every joint is resealed and tooled.
  5. We let your team know the cure time for every area.

Preparing for the visit

  • Let us know about stairs, lifts or work at height
  • Tell us about any previous sealing or DIY attempts
  • Tell us about any water getting in

Getting a quote

To get a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.

Get a quick quote

Related advice

When something else is needed

Some problems need a builder, plumber or other trade rather than us:

  • Certifying fire stopping or building compliance
  • Poor ventilation that keeps bringing mould back
  • Faulty shower valves and leaking traps

If in doubt, phone 0345 464 0079 or drop us an email and we will say what we think.

Joints and surfaces we work on

  • Office washrooms & kitchens
  • Student & care accommodation
  • Retail & leisure sites
  • Hotel bathrooms
  • Welfare facilities
  • Rental portfolios

Quotes for commercial sealant in Soake

Call for a quick quote. The main things that affect it are:

  • Access and height
  • Whether there’s mould to deal with
  • The old material and how stubborn it is
  • Any working-time requirements on site

No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference.

Helping us quote

There’s no need for technical detail. It helps if you can tell us:

  • Where the job is, and your postcode
  • Photos by email, if that is easy
  • If it’s domestic, commercial or a hotel
  • Access, such as stairs, a lift or height

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.

How the job changes by surface

Office washrooms & kitchens

In staff kitchens, we degrease joints before resealing, using a food-safe sealant by sinks where it’s needed.

Retail & leisure sites

Gym and leisure changing rooms take heavy use and plenty of water, so joints are sealed with anti-fungal sanitary silicone.

Commercial sealant in Soake: local notes

Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.

If you look after a building such as Denmead Junior School, washroom and kitchen sealant can be programmed around term times or opening hours. Rented homes near Bedhampton station change hands often, and we can quote for one property or a whole portfolio of rentals.

Soake is about 1 mile north-west of Waterlooville, in Hampshire. Homes, rented property, offices and hotels in Soake can book us for commercial sealant, old or new, large or small. Every job comes with our one-year guarantee. Soake is one of 683 towns and villages in Hampshire we cover. Portsmouth is on our list too, around 6 miles away.

We work across PO7 for commercial sealant and the streets around it. Whether your property is on Soake Road and Hambledon Road or a nearby road, our applicators can take on the job. If you’re just outside Soake, we cover Furzeley Corner (1 mile south-west), Hart Plain (1 mile east), Cowplain (1 mile east), Waterlooville (1 mile south-east) and Purbrook Heath (2 miles south). Further out, we also cover Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).

Around Soake

We work in homes and buildings around The Mead End pub and The Cowplain School. The closest station to Soake is Bedhampton station, roughly 3.7 miles south-east. A little further out are Clanfield Earthwork (4.7 miles north-east) and Queen Alexandra Hospital (3.2 miles south). Green spaces nearby include Southmoor Nature Reserve and Portsdown Hill.

Map of Soake © OpenStreetMap contributors

Why deal with it now?

Refitting a washroom is a big, disruptive project. When the fittings are sound, renewing the sealant brings it back with far less upheaval. We will tell you if we find anything that needs another trade. Around Soake, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

What it costs depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before any work starts.

Why book with us

  • A choice of colours where the product allows
  • Quality sealants from Arbo and Everbuild
  • Approved under the ARBOMaster scheme
  • We never seal over old sealant

Take a look at our cost guide or our reviews.

Soake questions

I let a flat near Bedhampton station. Can you help?

Yes, we work for letting agents and landlords. Just call 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear quote.

Is Soake in your area for commercial sealant?

Yes, Soake is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or email us with a few details of the job, and we’ll send you a clear quote.

Will the old sealant be removed?

Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.

Can I add another job to the visit?

Of course. Combining jobs makes good use of the visit.

Do you take on large, multi-room jobs?

Yes. With more than 20 years’ experience and over 2,847 projects behind us, we plan big jobs so the building keeps running.

How do I get a quote for commercial sealant in Soake?

There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before we start.

How long does commercial sealant take?

Typically it takes a few hours for a single washroom, longer for a whole building. Larger jobs naturally take longer.

Can you supply method statements and risk assessments?

Tell us what paperwork your site needs, for example RAMS or insurance details, and we’ll confirm what we can provide when we quote.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job