Hampshire · England

Gutter Sealing in Soake

Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for homes and businesses in Soake and across Hampshire. ARBOMaster approved applicators, fully insured, with a one-year guarantee.

  • Old gutter sealant that has let go
  • Garage door frames letting rain in
  • Old sealant on roofline trims that has split

Gutter sealing in Soake

About our gutter sealing in Soake

We seal leaking gutter joints, end caps, fascia and soffit joints plus roofline trims and garage door frames. It’s joint work, not replacing the gutter. If you are dealing with earlier gutter repairs that have peeled off and open joints in fascias and soffits, we can help, whatever the surface.

Somewhere as small as Soake, homes and farm buildings often face open ground, where walls and rooflines take the weather head on. Joints on those walls need a sealant that moves with the building and stays in place.

We stand behind the work with a 12-month guarantee, so you are not left on your own once the job is done.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Place
Soake (PO7)
Region
Hampshire
Guarantee
12 months on all our work
Quotes
A clear quote up front
Call
0345 464 0079
Page updated
26 October 2026

What happens on the day

Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes anything from an hour or two to a few hours. Somewhere like Soake needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. First we agree which joints need sealing.
  2. Each joint is cleaned and any old sealant removed.
  3. We make sure everything is dry.
  4. The sealant is applied and finished.
  5. We check our work before we leave.

How to prepare

  • Let us know about stairs, lifts or work at height
  • For indoor joints, keep the area dry beforehand if you can
  • Let us know if you’ve seen damp or leaks

Getting a quote

Want a quote for gutter sealing? Please ring 0345 464 0079 or drop us an email and tell us about the job. We’ll explain what we’d do and give you a clear price before any work starts.

Get a price

Read more

Looking after it afterwards

Good habits help new joints last longer. A few tips:

  • Sort out a dripping joint early
  • Get a dropping gutter looked at quickly
  • Keep the gutters clear of debris
  • Make sure downpipes aren’t blocked

Make sure downpipes are not blocked, so water can get away. A blocked pipe backs water up to the joints.

Leaking gutter joints get worse over time. The same spot gets soaked every time it rains, which can lead to staining and damp.

What sealant work cannot fix

We will not take on work that won’t last, so here’s what sealant cannot put right:

  • A gutter length that has split
  • Brackets that have snapped or loosened
  • Leaks from the roof rather than a joint

If you’re not sure, just ring 0345 464 0079 or email us and we will give you a straight answer.

What we seal

  • Gutter joints
  • Roofline trims
  • Soffit joints
  • Gutter end caps
  • uPVC fascias
  • Garage door frames

Soake buildings and the weather

Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

Schools such as Denmead Junior School are buildings too, and its movement joints, gutters and trims need looking after like any other building’s. If you let a flat or house near Bedhampton station, leaking gutter joints on a rental are best caught before they stain the walls.

Soake is about 1 mile north-west of Waterlooville, in Hampshire. Whether you’re in the middle of Soake or further out, gutter sealing is available for homes and businesses alike, from flats and houses to offices and hotels. Across Hampshire, we cover 683 places, and Soake is one of them. Our Portsmouth page covers work nearby.

Every address in PO7 is covered for gutter sealing, from the main roads to the quietest streets. Streets in the area include Soake Road and Hambledon Road, and we cover them all. Close by, we work in Furzeley Corner (1 mile south-west), Hart Plain (1 mile east), Cowplain (1 mile east), Waterlooville (1 mile south-east) and Purbrook Heath (2 miles south). Further out, we also cover Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).

Landmarks near Soake

Locally, jobs take us to homes and businesses close to The Mead End pub and The Cowplain School. The nearest railway station is Bedhampton station, about 3.7 miles south-east. Well-known places in the area include Clanfield Earthwork (4.7 miles north-east) and Queen Alexandra Hospital (3.2 miles south). The countryside around Soake includes Southmoor Nature Reserve and Portsdown Hill.

Map of Soake © OpenStreetMap contributors

For landlords and businesses

Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.

What the job involves on each surface

Soffit joints

Soffit joints are sealed in a colour to suit, where one is available.

Gutter end caps

Stop ends hold back water at the end of a run. When their seal fails, they drip.

What affects the cost of gutter sealing

The price is agreed before any work begins. It’s based on:

  • Any mould that needs treating
  • The number of rooms or windows
  • Any working-time requirements on site
  • Whether the work is at height

What it costs depends on how much there is to do, how hard the old material is to remove and access to the work. We give a clear quote before any work starts.

What we need to know

Photos by email are helpful but not essential. Please mention:

  • What the problem is, such as mould, gaps, leaks or cracking
  • Where the property is
  • If someone has resealed it before
  • Roughly how big the job is

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, ring 0345 464 0079 or email us.

What happens if it’s left?

Water from a leaking joint hits the same spot every time. Left, it can stain walls and lead to damp, so it’s worth sealing early. In a small place like Soake, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.

Why us?

  • Colour picked to suit the job
  • White, clear, grey or another colour, product permitting
  • We leave the area clean and tidy
  • You choose the colour before work begins

See how sealant jobs are priced or customer reviews.

Your questions about gutter sealing in Soake

I let a flat near Bedhampton station. Can you help?

Yes, we work for landlords and agents. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before we start.

Can you do gutter sealing in Soake?

Yes. Our work covers London and the South East, and Soake is part of that. You can call 0345 464 0079 or email us and tell us what needs doing.

Do the sealants smell?

It depends on the product. Some smell for a while, some hardly at all.

Can you reach high gutters?

Low gutters are simple to reach. If it’s higher up, let us know and we will confirm the access.

What does gutter sealing cost?

It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or drop us an email with a short description of the job.

Will sealing fix a sagging gutter?

It will not last. The joint will pull apart, so the fall and brackets need sorting first.

Is it worth trying it myself?

That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.

How long should I leave it?

It depends on the product and the temperature. Before we leave, we’ll tell you the cure time.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job