Argyll and Bute · Scotland
Regrouting in Kilmore, Argyll and Bute
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Kilmore and across Argyll and Bute. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Crumbling grout between the tiles
- Grout stained black or orange that won’t clean
- Shower grout that has worn away
Regrouting in Kilmore
Before work begins, the tiles are checked. Loose or hollow tiles are pointed out first, because regrouting won’t fix what’s behind them. With sound tiles, regrouting is a tidy, lasting improvement. We work on bathroom wall tiles, tiled floors and kitchen splashbacks, and common reasons people get in touch are floor grout that has worn and darkened and good tiles let down by tired grout.
For a place like Kilmore, the job is the same as anywhere: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. The journey and access are simply planned in advance.
There’s a 12-month guarantee on every job, whatever its size.
- Place
- Kilmore (PA34)
- Region
- Argyll and Bute
- Guarantee
- 12 months on all our work
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Questions from Kilmore
Is Kilmore within the area you cover?
Yes, Kilmore is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you cover Kilmore for regrouting?
Yes. Our work covers the whole of Scotland, and Kilmore is part of that. Just email us at info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Will the old sealant be removed?
Yes, always, and completely. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
Will the sealant be renewed as well as the grout?
Usually, yes. The corners and edges should be silicone and doing both at once leaves everything sound.
Where is Mr Mastic based?
We work from Crawley. Our applicators cover Kilmore.
Do the sealants smell?
That depends on the sealant. Some smell for a while, some hardly at all.
Do you regrout part of a bathroom, like the shower?
Yes. A lot of our jobs are only the shower, or the area where the grout has gone.
Different surfaces, different methods
Shower walls
Showers put more water on grout than anywhere else. We replace it, and reseal the corners.
Kitchen splashbacks
Grout behind the hob and sink works hard. We renew the grout and the worktop sealant.
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Clean with a soft brush, not anything metal
- Wipe water off the walls when you are done
- Avoid neat bleach and strong acid descalers on grout
- Don’t ignore a tile that feels loose
Leave the area unused for as long as we advise, so it can harden properly. After that, rinse the tiles after showering and keep the room ventilated.
Stains that will not clean are a sign the grout is breaking down. At this point it’s a simple regrout, before the joints open up.
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Housing providers, facilities teams and property managers book us too in Kilmore and across Argyll and Bute. Several sites can be quoted together, and we’re fully insured for the work.
Places near Kilmore
Also in Kilmore
Regrouting around Kilmore
Kilmore is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Managing a site like Oban High School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Homes close to Kilmore Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them. Letting a property close to Oban station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Kilmore is about 37 miles north-west of Helensburgh, in Argyll and Bute. Kilmore gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Kilmore is one of 118 towns and villages in Argyll and Bute we cover. We also work in Glasgow, about 57 miles from Kilmore.
We work across PA34 for regrouting. If you need regrouting at a property on Riverside Road and Soroba Road or a nearby road, we can help. Close by, we work in Oban (3 miles north-west), Dunollie (4 miles north-west), Ganavan (4 miles north), Dunbeg (5 miles north) and Connel (6 miles north). If you’re somewhere remote, the job takes a little more planning.
What’s near Kilmore
Kilmore’s nearest station is Oban station, roughly 3 miles north-west. A little further out are Lorn and Islands Hospital (2.3 miles north-west) and Dunollie Castle (4.1 miles north-west). For a walk, there’s Loch Nell and Càrn Dearg.
What we do, step by step
You do not need to clear the whole room or building before we come, just the space around the work. We protect the rest, and the job takes anything from a few hours to a full day, depending on the area for a typical job. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Mention if the joints have been sealed before
- Mention any leaks or damp you’ve noticed
Ask for a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
Related advice
Why deal with it now?
Cleaning products may brighten grout for a time, but stains and mould that have soaked in tend to return. Replacing the grout and resealing the edges is a lasting fix. In an older home around Kilmore, damp from a failed joint can get into timber and plaster.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- A 12-month guarantee on all work
- Experience in homes, commercial sites and hotels
- Fully insured
- ARBOMaster approved applicator
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
What sealant work cannot fix
A few problems are outside what sealant work can do:
- Damaged tiles that need replacing
- Failed tanking or waterproofing under the tiles
- Tiles that are loose or hollow behind
If you’re not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.
Joints and surfaces we work on
- Bathroom floors
- Wet rooms
- Shower walls
- Kitchen splashbacks
- Tiled floors
- Bathroom wall tiles