Argyll and Bute · Scotland
Remedial sealant & repairs in Kilmore, Argyll and Bute
Removing failed, mouldy or leaking sealant and putting it right in Kilmore, with a 12-month guarantee on every job. Call for a quick quote.
- Worktop sealant that has shrunk and split
- A shower that leaks however often it’s resealed
- Smears and lumps from a botched reseal
Remedial sealant in Kilmore, done properly
A movement joint stops working when its sealant splits or sets hard. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. Typical jobs include sealant peeling off a dusty or damp surface and wide, uneven beads that look worse than the old ones, on botched or over-sealed joints, shrunken worktop sealant and mouldy bath & shower sealant.
For a place like Kilmore, the job is the same as anywhere: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. The journey and access are simply planned in advance.
The work is covered for a year after we finish. If anything is not right with it, email us at info@mrmastic.co.uk.
- Where
- Kilmore (PA34)
- Wider area
- Argyll and Bute
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Kilmore questions
Do you work for landlords with property near Oban station?
Yes, rental work is part of what we do. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we will give you a clear quote.
Can you do remedial sealant in Kilmore?
Yes. We work across all of Scotland, and Kilmore is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Which products do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We’ll tell you what we are using and why.
What should I tell you?
A short description and the location, plus pictures if you have them. If we need more, we’ll ask.
What if the leak is not the sealant?
You will hear it from us. If it’s a cracked tray, a failed valve or a leaking waste, resealing will not fix it, so we won’t pretend it will.
Can I choose the sealant colour?
We’ll suggest a colour to suit the surroundings. The product needed can limit the range.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Is remedial work guaranteed?
Yes, for 12 months. Where we’ve flagged another fault, it needs fixing for the joint to last.
Bathrooms and kitchens in Kilmore
Kilmore is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
Rented homes near Oban station change hands often, and a joint that keeps failing is best fixed properly while the property is empty. Schools such as Oban High School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Kilmore is about 37 miles north-west of Helensburgh, in Argyll and Bute. Our applicators cover remedial sealant for homes and businesses in Kilmore and nearby, as part of our work across Argyll and Bute. Kilmore is one of 118 towns and villages in Argyll and Bute we cover. Glasgow is on our list too, around 57 miles away.
Work in PA34 is quoted and booked the same way as anywhere else. Local streets include Riverside Road and Soroba Road, and we cover them all. Other places close to Kilmore include Oban (3 miles north-west), Dunollie (4 miles north-west), Ganavan (4 miles north), Dunbeg (5 miles north) and Connel (6 miles north). If you are somewhere remote, a little more planning is needed.
Near you in Kilmore
For rail, the closest station is Oban station, about 3 miles north-west of the centre. Well-known places in the area include Lorn and Islands Hospital (2.3 miles north-west) and Dunollie Castle (4.1 miles north-west). For a walk, there’s Loch Nell and Càrn Dearg.
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Keep the room well ventilated
- Have loose fittings fixed before resealing
- Never fill a movement joint with mortar or grout
- Do not add new sealant on top of old
If the joint ever needs renewing, have it cut out, not sealed over. Over-sealing is how many remedial jobs start.
Signs to act on: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Each one is worth getting looked at.
When to call us in Kilmore
Using the wrong product is a common cause: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.
It’s worth asking for a quote if you see:
- Decorators’ caulk around a bath or shower
- Dark patches showing through the sealant
- Torn expansion joints
- Beads that never stuck properly
If you live in an older home near Kilmore Church, older homes can move a little, which is hard on rigid grout and tired sealant.
What to look for in a quote
- When the joint can take water or movement
- How long the guarantee is
- What product goes in the joint
- How the joint is cleaned and prepared
What happens on the day
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take a few hours, depending on how many layers have to come out. Around Kilmore, distance and access matter more than parking. Let us know how to find you and how to reach the joints.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
- Mention any leaks or damp you’ve noticed
Ask for a quote
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Related advice
What affects the cost of remedial sealant
Jobs vary more than people expect. What affects the quote:
- How easy the joints are to reach
- Working hours on commercial sites
- The old material and how stubborn it is
- The number and length of the joints
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Asking for a quote
When you contact us, these details help:
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
- How many joints, rooms or windows are involved
- Whether it’s a home or a business
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.
Why it’s worth doing now in Kilmore
Leaks that are left keep doing damage out of sight: wet floors, stained ceilings and swollen worktops. By comparison, sorting the joint is quick. Around Kilmore, water from a failed joint in an older stone home can soak into timber and plaster.
What it costs depends on the amount of work, how much old material has to come out and access to the work. We give a clear quote before any work starts.
Why book with us
- Sanitary silicone with an anti-fungal additive in wet areas
- Over 20 years’ experience
- We agree the colour with you first
- We’re fully insured
Read our cost guide or customer reviews.
What sealant work cannot fix
We’ll always be straight with you, so here’s what sealant can’t fix:
- A bath, tray or worktop that moves until it’s properly fixed
- Cracks in the fitting rather than the joint
- A leaking trap, valve or supply pipe
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think before you book.
Where we work in Kilmore
- Mouldy bath & shower sealant
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Botched or over-sealed joints
- Failed movement joints
What the job involves on each surface
Worktops & kitchens
A loose worktop splits its sealant. It needs fixing down first, which we will point out.
Movement & expansion joints
Joints filled with mortar, grout or rigid filler cannot move. Where it can be raked out, we replace it with flexible sealant.