Argyll and Bute · Scotland

Commercial & hotel sealant in Kilmore, Argyll and Bute

Specialist commercial sealant for Kilmore: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.

  • Whole floors of tired en suites
  • Black, stained silicone in guest bathrooms
  • Shower leaks reaching the floor below

Trusted commercial sealant in Kilmore

Commercial sealant in Kilmore, done properly

Wet areas get anti-fungal sanitary silicone, and kitchens get a food-safe product where it’s needed. We use sealants from Arbo and Everbuild, chosen to suit each joint. We work on rental portfolios, hotel bathrooms and student & care accommodation, and people most often call us about leaks from showers into rooms or ceilings below and split sealant where wet room floors meet walls.

Work in a place like Kilmore is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.

Big or small, it’s backed by our one-year guarantee in Kilmore and across Argyll and Bute.

Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall
Location
Kilmore (PA34)
Wider area
Argyll and Bute
Cover
One year on every job
Quotes
Quoted before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026

What we do, step by step

Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and tidy away. It usually takes a few hours per room, so whole buildings are phased. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.

  1. First we visit and agree the scope, the sequence and the working hours.
  2. Every area is sheeted and the old silicone stripped out.
  3. We clean the joints, treat any mould and let them dry.
  4. New sealant suited to each area is applied and tooled.
  5. We check every room and give its cure time for housekeeping.

Getting ready for the visit

  • Tell us about any previous sealing or DIY attempts
  • Tell us about any water getting in
  • Keep pets and children clear of the area while we work

Ask for a quote

Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand.

Ask for a quote

Read more

Looking after it afterwards

How long the joints last depends on use and care. We suggest:

  • Pass on the cure time to whoever cleans the rooms
  • Note the date each area was done
  • Keep strong chemicals and scourers off the joints
  • Leave squeegees in busy showers

Strong chemicals and scourers wear silicone out faster. Ask cleaners to use mild products and soft cloths on the sealant.

Planned resealing is easier to manage than emergency repairs. Rooms can be scheduled around occupancy and staff, instead of rooms closing without warning.

Can I do it myself?

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.

When it is not the sealant

We’d rather tell you now than do work that won’t last, so these are the limits:

  • Assessing what fire stopping a building needs
  • Water coming from plumbing rather than sealant
  • A shower tray, bath or basin that’s cracked or broken

If you are not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer before you book.

Where we work in Kilmore

  • Student & care accommodation
  • Rental portfolios
  • Retail & leisure sites
  • Hotel bathrooms
  • Welfare facilities
  • Office washrooms & kitchens

Commercial sealant around Kilmore

For seaside hotels, guest houses and holiday lets around Kilmore, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Private landlords in Scotland must meet the Repairing Standard, so landlords with several properties often need sealant work across them all.

For site and facilities teams at buildings such as Oban High School, busy washrooms and kitchens can be resealed in phases so they stay open. For buildings such as Kilmore Church, halls and community kitchens see heavy use, and their sealant shows it.

Kilmore is about 37 miles north-west of Helensburgh, in Argyll and Bute. Jobs in Kilmore get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Our area takes in 118 places across Argyll and Bute, large and small. Glasgow is on our list too, about 57 miles from Kilmore.

Our applicators cover all of PA34 for commercial sealant. That includes homes and businesses on Riverside Road and Soroba Road and the roads around them. Other places close to Kilmore include Oban (3 miles north-west), Dunollie (4 miles north-west), Ganavan (4 miles north), Dunbeg (5 miles north) and Connel (6 miles north). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.

Near you in Kilmore

The nearest railway station is Oban station, roughly 3 miles north-west. Well-known places in the area include Lorn and Islands Hospital (2.3 miles north-west) and Dunollie Castle (4.1 miles north-west). The countryside around Kilmore includes Loch Nell and Càrn Dearg.

Map of Kilmore © OpenStreetMap contributors

How we quote for commercial sealant

You will get a clear quote before any work starts. It’s based on:

  • Whether there’s mould to deal with
  • Working hours on commercial sites
  • How many rooms, windows or areas are involved
  • The product the joint needs

Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, send an email to info@mrmastic.co.uk and we will give you an honest view and a quote.

Helping us quote

Photos help, but a description is a good start. Please mention:

  • Any previous sealing or DIY work
  • Any access issues, like height or stairs
  • How many joints, rooms or windows are involved
  • Where the job is, and your postcode

For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.

Signs you need commercial sealant in Kilmore

Quick fixes come back quickly. Sealing over old silicone, sealing wet joints or using the wrong product all lead to the same thing: another reseal before long.

Look out for these signs:

  • Leaks from showers into rooms or ceilings below
  • Mouldy bathrooms flagged at a tenancy check
  • Too many rooms to reseal without closing the building
  • Split sealant around staff kitchen worktops and sinks

Letting a property close to Oban station? Then sealant work can be quoted for a single flat or a whole portfolio.

What your quote should include

  • How hidden problems are handled
  • How long to leave it before use
  • Whether all the old sealant comes out first
  • The length of the guarantee

Choosing a sealant specialist

What happens if it’s left?

Sealant is easy to forget until an audit or inspection is due. Booking it in good time leaves room for the cure time before the visit. In a place like Kilmore, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.

Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.

What you get with us

  • We never seal over old sealant
  • Tidy, careful work
  • Sanitary silicone with an anti-fungal additive in wet areas
  • Colour picked to suit the job

Read our cost guide or customer reviews.

Questions from Kilmore

Do you cover Kilmore for commercial sealant?

Yes, Kilmore is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear price.

Is Kilmore within the area you cover?

Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Will it make a mess?

Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.

Will there be a smell?

That depends on the sealant. Some smell for a while, some hardly at all.

Where do you work from?

Mr Mastic is based in Crawley. We cover Kilmore and the rest of Argyll and Bute, along with the rest of our area.

How do I get a quote for commercial sealant in Kilmore?

It depends on the job, so we quote each one individually. To get one, drop us a line at info@mrmastic.co.uk and let us know what needs doing and where.

Which products do you use?

The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.

Will the old sealant be removed?

Yes. We cut out all the old sealant and clean the joint before applying anything new.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job