Shetland Islands · Scotland
Regrouting in Clivocast
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Clivocast, with a one-year guarantee on every job. Ask us for a quote.
- Cracked or crumbling grout lines
- Stained grout that cleaning will not shift
- Shower grout that has worn away
Regrouting in Clivocast
We regroute showers, bathroom walls and floors, splashbacks and wet rooms. It can be a full room, or just the area that has failed. Whatever the size, the method stays the same. We work on shower walls, bathroom floors and tiled floors, and the jobs we see most are old grout in a dated colour and grout stained black or orange that won’t clean.
For a place like Clivocast, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.
You get a one-year guarantee, the same in Clivocast as everywhere else we work.
- Where
- Clivocast (ZE2)
- Region
- Shetland Islands
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
When it is not the sealant
We will not take on work that will not last, so these are the limits:
- Loose tiles, which need refixing first
- Tiles that are chipped or split
- Water coming from plumbing rather than grout
If in doubt, email us at info@mrmastic.co.uk and we will say what we think before booking.
Joints and surfaces we work on
- Kitchen splashbacks
- Wet rooms
- Bathroom wall tiles
- Shower walls
- Bathroom floors
- Tiled floors
Nearby places to Clivocast
More services for Clivocast
What happens if it’s left?
Cracked grout lets water behind the tiles. Leave it, and the adhesive or the wall behind can suffer, and then you are looking at retiling. Dealing with it now keeps it small. Around Clivocast, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
What you get with us
- 20+ years of sealant experience
- Neat joints and a tidy finish
- Any old sealant cut out fully, not covered over
- Arbo and Everbuild products
Read how sealant jobs are priced or our reviews.
Bathrooms and kitchens in Clivocast
Clivocast is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
Around Clivocast, as everywhere, regrouting is only as good as the preparation behind it.
Clivocast is in the Shetland Islands. We carry out regrouting for householders, landlords and businesses in Clivocast and the surrounding area. Clivocast is one of 63 places in the Shetland Islands we cover.
Here we cover the ZE2 postcode area for regrouting. Nearby, we also carry out regrouting in Cullivoe (4 miles north-west), Baltasound (6 miles north), Houbie (6 miles south), Camb (7 miles south-west) and Mid Yell (8 miles south-west). Island and remote addresses take a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
What’s near Clivocast
A little further out are Muness Castle (1.8 miles east). The countryside around Clivocast includes Easter Loch and Valla Field.
Do you need regrouting in Clivocast?
A bathroom that stays damp keeps the grout wet, giving mould a place to grow. When black spots keep returning, the mould has usually got into the grout.
If you can see any of these, it’s time to have the joints looked at:
- Splashback grout that has darkened
- Cracked or crumbling grout lines
- Grout in a colour the owner wants to change
- Gaps where the shower grout has gone
For an older house near a landmark such as Uyeasound Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
What your quote should include
- What happens if they find a problem under the old sealant
- Whether they seal over old material or remove it
- How much experience the applicator has
- What preparation is included
Surface by surface
Wet rooms
Both the grout and the silicone in a wet room matter. We replace the grout and reseal the edges.
Bathroom floors
If floor grout keeps cracking, the floor may be moving. We check the tiles before regrouting.
Clivocast: your questions answered
Do you cover Clivocast for regrouting?
Yes, Clivocast is within the area we cover. Our work covers the whole of Scotland. You can email us at info@mrmastic.co.uk and let us know what needs doing.
What guarantee comes with regrouting in Clivocast?
Every job comes with our 12-month guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Will regrouting fix loose tiles?
New grout can’t hold loose tiles in place. We flag any loose or hollow tiles before starting, so you can decide what to do.
Is regrouting a chance to pick a new grout colour?
Yes. It’s the ideal time to change it. Mention the colour you have in mind when you send an email to info@mrmastic.co.uk.
Can you regrout just the shower?
Yes. A lot of our jobs are only the shower, or just the joints that have failed.
What does regrouting cost?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before any work starts.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
Where is Mr Mastic based?
We are based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
How the visit works
Before we leave, we go over the finished joints with you and tell you how long to leave it. The visit itself usually takes a few hours for a shower enclosure, longer for a whole room, depending on the amount of work. Around Clivocast, distance and access matter more than parking. Let us know how to find you and how to reach the joints.
- We check the tiles are sound and flag any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- Dust and debris are vacuumed out of every joint.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- Corners and edges are resealed with flexible silicone, not grout.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Mention any tricky access
- Mention any sign-in or site rules at work premises
Ask for a quote
If you’re in Clivocast and need regrouting, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Related advice
For landlords and businesses
We work for landlords and agents as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
How we quote for regrouting
There’s no set price list. What we look at:
- The number and length of the joints
- Mould in or behind the old joints
- The old material and how stubborn it is
- Which sealant suits the joint
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Helping us quote
Before you ask for a quote, have a think about:
- A few pictures by email, if you can
- Whether it has been sealed before
- Where the job is, and your postcode
- If it’s domestic, commercial or a hotel
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you are ready, drop us a line at info@mrmastic.co.uk.