Shetland Islands · Scotland
Haroldswick Regrouting
Specialist regrouting for Haroldswick: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Corners filled with grout instead of silicone
- Grout washed out of a shower
- A grout colour that no longer suits the room
Looking after it afterwards
So the new joints stay in good condition:
- Get any tile that moves checked promptly
- Skip wire brushes and scourers
- Don’t use strong acidic cleaners on grout
- Run the extractor fan during and after a shower
If a tile starts to feel loose, get it looked at early. Movement will crack the new grout and open a path for water.
Leaving failed grout can mean tiles come loose. By then, new grout alone is not enough so early action pays.
Regrouting in Haroldswick, done properly
When grout stays dark however much you clean it, the discolouration has usually soaked into the grout. Replacing it is the lasting answer and you can pick a different colour while you’re at it. We work on bathroom floors, shower walls and kitchen splashbacks, and common reasons people get in touch are kitchen splashback grout stained by grease and discoloured grout on otherwise sound tiles.
A bathroom in a place like Haroldswick gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
Each job carries a 12-month guarantee.
- Place
- Haroldswick (ZE2)
- Wider area
- Shetland Islands
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How the visit works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes a few hours, or longer for a fully tiled room from start to finish. For a place like Haroldswick, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We check the tiles for any that are hollow or loose.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
Getting ready for the visit
- Let us know about parking restrictions
- For business premises, tell us about site rules or sign-in
- Clear items away from the joints we are working on
How to get a quote
We quote each job on its own, so start by telling us what you need. Simply send an email to info@mrmastic.co.uk and describe the job.
Advice
Also in Haroldswick
What affects the cost of regrouting
The quote reflects the job in front of us. We look at:
- How much old sealant there is and how hard it is to remove
- The number and length of the joints
- The number of rooms or windows
- Which sealant suits the joint
What it costs depends on the amount of work, how much old material has to come out and how easy the joints are to reach. We give a clear quote before work begins.
What to tell us for a quote
Before you ask for a quote, have a think about:
- How we’d reach the joints
- Where the property is
- What’s wrong with the joints now
- Photos by email, if that is easy
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
For landlords and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
How the job changes by surface
Kitchen splashbacks
Splashback grout picks up grease and cooking stains. Stained grout is best replaced.
Wet rooms
Wet room grout and sealant need to be in good order. We renew both.
What regrouting looks like in Haroldswick
Haroldswick is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Island jobs need planning around ferries and the weather, so the more notice, the better.
If you live in an older home near St John's Church, walls and floors in older homes can move, and sealant and grout show it first. In and around Haroldswick, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Haroldswick is in the Shetland Islands. We carry out regrouting for homes and businesses in Haroldswick and nearby, as part of our work across the Shetland Islands. Our the Shetland Islands coverage runs to 63 places, and Haroldswick is one of them.
We cover every part of the ZE2 postcode area for regrouting. Whether your property is on Taftens, Nordabrake and Brakefield Crescent or a nearby road, our applicators can take on the job. Haroldswick is on the B9087, which makes it straightforward to reach with everything needed for regrouting. Neighbouring places we cover for regrouting include Baltasound (3 miles south-west), Clivocast (8 miles south), Cullivoe (9 miles south-west), Houbie (14 miles south) and Camb (15 miles south-west). For island and remote addresses, the job takes a little more planning.
Local landmarks in Haroldswick
Other landmarks nearby include Unst Heritage Centre (0.6 miles south-west). The countryside around Haroldswick includes Little Heog and Loomer Shun.
When it isn’t the sealant
To be straight with you, some problems need a different trade:
- Damaged tiles that need replacing
- Water coming from plumbing rather than grout
- Waterproofing that has failed below the tiling
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer.
Joints and surfaces we work on
- Bathroom floors
- Wet rooms
- Kitchen splashbacks
- Bathroom wall tiles
- Tiled floors
- Shower walls
Leave it or put it right?
Bleach can lighten stained grout for a while, but mould that has got into grout usually comes back. New grout, with silicone in the corners, deals with the cause. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll go through it with you.
What you get with us
- Homes, businesses and hotels
- ARBOMaster approved applicator
- We leave the area clean and tidy
- Rated 4.9 stars on Google
Read how sealant jobs are priced and customer reviews.
Haroldswick: your questions answered
Can you do regrouting in Haroldswick?
Yes, Haroldswick is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Is Haroldswick within the area you cover?
Yes, Haroldswick is covered. Our work covers the whole of Scotland, islands included, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you quote for more than one area?
Yes. More than one area can go on one quote.
Is there any odour?
Some sealants have a smell while they cure, which fades as it sets. Opening a window helps.
How long does regrouting take?
As a guide, most jobs take a few hours, or longer for a fully tiled room. Bigger jobs take longer, and we will tell you how long to expect.
What does regrouting cost?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Could my grout be a different colour after regrouting?
Yes. It’s the ideal time to change it. Mention the colour you have in mind when you drop us a line at info@mrmastic.co.uk.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.