Perth and Kinross · Scotland
Regrouting in Ballinluig, Perth and Kinross
Regrouting for Ballinluig and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Splashback grout that has darkened
- Floor grout that won’t come clean
- Crumbling grout between the tiles
Surface by surface
Kitchen splashbacks
Kitchen grout collects grease and food splashes. Stained grout is best replaced.
Corners and edges
Edges are resealed while we are there, so the whole area is finished together.
Regrouting in Ballinluig
When grout stays dark however much you clean it, the stain is often in the grout itself. Replacing it is the lasting answer and you can pick a different colour while you are at it. Common call-outs are for grout stained black or orange that won’t clean and old grout in a dated colour, across bathroom wall tiles, bathroom floors and tiled floors.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are usually the first signs.
The work is covered for a year after we finish. If anything is not right with it, email us at info@mrmastic.co.uk.
- Place
- Ballinluig (PH9)
- Wider area
- Perth and Kinross
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Regrouting around Ballinluig
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
If you live in an older home near Logierait Parish Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Ballinluig is about 14 miles west of Blairgowrie and Rattray, in Perth and Kinross. Anywhere in PH9, we cover regrouting for homes and businesses. Our Perth and Kinross coverage runs to 107 places, and Ballinluig is one of them. There’s also a page for Dundee, about 29 miles away.
We work across PH9 for regrouting. That includes homes and businesses on Buail Bhan, Broom Hill and Braeside Road and the roads around them. We also cover Logierait (1 mile south-west), Dowally (3 miles south-east), Port na Craig (4 miles north-west), Pitlochry (4 miles north-west) and Grandtully (4 miles west). Further out, we also cover Blairgowrie and Rattray (14 miles east), Rattray (14 miles east), Aberfeldy (8 miles west), Stanley (15 miles south-east) and Bankfoot (12 miles south-east).
Around Ballinluig
The nearest railway station is Pitlochry station, about 4 miles north-west. Nearby you will also find Pitlochry Community Hospital (4 miles north-west) and Atholl Palace Museum (3.6 miles north-west). For a walk, there’s Lochan Oisinneach Mòr.
Ballinluig: your questions answered
I let a flat near Pitlochry station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just email us at info@mrmastic.co.uk with the address and what needs doing, and we’ll send you a clear quote.
Can you do regrouting in Ballinluig?
Yes. We work across all of Scotland, and Ballinluig is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing.
Could my grout be a different colour after regrouting?
Yes, plenty of people choose to. A darker grout hides marks better, while lighter grout brightens a room.
Can you quote for more than one area?
Yes, we can. More than one area can be quoted together.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Is it OK to seal over old sealant?
No, it won’t last. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
Can I do it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Where is Mr Mastic based?
We are based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Can I do it myself?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Towns and villages near Ballinluig
Other services in Ballinluig
Looking after it afterwards
Good habits help new joints last longer. Our tips:
- Skip wire brushes and scourers
- Rinse the tiles after showering
- Keep an eye on the silicone along the edges
- Stick to mild products for cleaning grout
Before we leave, you will know when the shower can be used. Please follow it, and avoid scrubbing the new grout hard for the first few days.
Tiles can come away if failed grout is left. Once that happens, regrouting won’t fix it, so it’s worth acting early.
What affects the cost of regrouting
Call for a quick quote. The main things that affect it are:
- The old material and how stubborn it is
- How easy the joints are to reach
- Any working-time requirements on site
- How many areas need sealing
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
To help us quote quickly, let us know:
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
- Whether it has been sealed before
- Where the property is
Asking for a quote is easy: let us know what needs doing and where and its rough size. A few pictures by email make the job easier to understand.
How the visit works
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it normally takes a few hours for a shower enclosure, longer for a whole room. Around Ballinluig, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We check the tiles for any that are hollow or loose.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- Silicone goes into the corners and along the edges.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Clear items away from the joints we are working on
- Let us know if you’ve seen damp or leaks
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Related advice
Do you need regrouting in Ballinluig?
Poor ventilation keeps grout damp, giving mould a place to grow. When black spots keep returning, the mould has generally got into the grout.
The problems people generally mention when they call include:
- Kitchen splashback grout stained by grease
- Cracked grout along the bath or tray
- Grout in a colour the owner wants to change
- Floor grout that will not come clean
If you let a flat or house near Pitlochry station, a regrout while the flat is empty is quicker than working around a tenant.
Comparing quotes
- What the cure time is
- Which sealant they’ll use, and why
- Whether you can choose the colour
- Is the old sealant removed completely?
When it isn’t the sealant
Sealant isn’t the answer to every problem, and we will tell you before any work starts. It will not solve:
- Movement in a stud wall or floor
- Cracked or broken tiles
- Waterproofing that has failed below the tiling
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before booking.
Surfaces we seal
- Tiled floors
- Kitchen splashbacks
- Bathroom floors
- Shower walls
- Bathroom wall tiles
- Wet rooms