Perth and Kinross · Scotland

Regrouting in Pitlochry, Perth and Kinross

Regrouting across Pitlochry and nearby, with old sealant always removed completely.

  • Floor grout that won’t come clean
  • A grout colour that no longer suits the room
  • Cracked or crumbling grout lines

Need regrouting in Pitlochry?

Regrouting in Pitlochry

Before we start, the tiles are checked. If any tiles are loose or sound hollow, we tell you, because regrouting will not fix what’s behind them. With sound tiles, regrouting is a tidy, lasting improvement. If you’re dealing with greasy, stained grout behind the hob and grout that’s cracking and breaking up, we can put it right.

For a place like Pitlochry, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.

We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.

Location
Pitlochry (PH16)
Wider area
Perth and Kinross
Cover
A year, on every job
Quotes
A clear price before work begins
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom

Landlords, agents and businesses in Pitlochry

We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.

If you manage several properties in or around Pitlochry, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.

The process

You do not need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the work takes a few hours for a shower enclosure, longer for a whole room for a typical job. Outside jobs in Pitlochry need a dry day, because sealant won’t bond to a wet joint, so external jobs may need to move if the day turns wet. Work indoors is not affected.

  1. We check the tiles are sound and flag any that are loose or hollow.
  2. Old grout is raked out to a consistent depth without chipping the tiles.
  3. Dust and debris are vacuumed out of every joint.
  4. New grout is worked into the joints and cleaned off the tile faces.
  5. Corners and edges are resealed with flexible silicone, not grout.

Before we arrive

  • Tell us about any water getting in
  • Let us know about parking restrictions
  • Clear the area around the work

Get a quote

For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.

Get a price

Related advice

Common questions in Pitlochry

Do you work for landlords with property near Pitlochry station?

Yes, we work for landlords and letting agents. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we’ll give you a clear quote.

Do you take on hotel work around Pitlochry?

Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.

What do you put in the joint?

Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.

Is regrouting a chance to pick a new grout colour?

Yes, regrouting is the time to do it. Mention the colour you have in mind when you email us at info@mrmastic.co.uk.

Is the work guaranteed?

Every job comes with our one-year guarantee, and we are fully insured.

Can new sealant go over the old?

No. New silicone will not bond to old silicone, and it traps any mould or water underneath. We remove it all first.

How long does regrouting take?

Most jobs take anything from a few hours to a full day, depending on the area, including preparation and clearing up. We will confirm how long when we quote.

Will it make a mess?

No. The area is protected while we work and cleaned up afterwards.

Quotes for regrouting in Pitlochry

For a quick quote, just ask. What matters most is:

  • Access and height
  • The type of sealant required
  • How much old sealant there is and how hard it is to remove
  • Whether there’s mould to deal with

Combining jobs into one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.

Asking for a quote

Photos help, but a description is a good start. Please mention:

  • Where the job is, and your postcode
  • Whether it’s a home or a business
  • Photos by email, if that is easy
  • Any access issues, like height or stairs

If you’re in Pitlochry and need regrouting, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.

What regrouting looks like in Pitlochry

Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. There are hotels and other places to stay in and around Pitlochry. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.

Letting a property close to Pitlochry station? Then a regrout while the flat is empty is quicker than working around a tenant.

Pitlochry is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Jobs in Pitlochry get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 107 places across Perth and Kinross, large and small. For nearby work, see our Dundee page (33 miles or so).

All of PH16 is within our area for regrouting. If you need regrouting at a property on Church Road, Station Road and Well Brae or anywhere close by, our applicators can take on the job. Pitlochry is on the A924, so it’s easy for us to get to with everything needed for regrouting. Nearby, we also carry out regrouting in Port na Craig (1 mile south), Moulin (1 mile north), Grandtully (4 miles south-west), Ballinluig (4 miles south-east) and Little Ballinluig (4 miles south-west). Pitlochry is among the bigger towns we cover in Perth and Kinross.

Near you in Pitlochry

Typical jobs here are in homes near Faskally Forest and The Old Mill Inn. There’s a railway station in Pitlochry itself: Pitlochry station. Nearby you will also find Pitlochry Community Hospital (within half a mile south-west) and Atholl Palace Museum (under half a mile south-east). Green spaces nearby include Loch na Bà.

Map of Pitlochry © OpenStreetMap contributors

How the job changes by surface

Wet rooms

Wet rooms have water across the floor, so good grout is important. We check the tiles first.

Bathroom floors

If floor grout keeps cracking, the floor may be moving. We check the tiles before regrouting.

What sealant work cannot fix

To be straight with you, there are a few things sealant won’t fix:

  • Tiles that are loose or hollow behind
  • Cracked or broken tiles
  • Waterproofing that has failed below the tiling

Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly before booking.

Joints and surfaces we work on

  • Bathroom floors
  • Kitchen splashbacks
  • Bathroom wall tiles
  • Shower walls
  • Tiled floors
  • Wet rooms

What we’re called out for in Pitlochry

Soap scum and limescale build up on grout and stick to it. The grout beneath can stain and weaken, which is when replacing it makes sense.

If you can see any of these, it’s time to have the joints looked at:

  • Floor grout that has worn and darkened
  • Greasy, stained grout behind the hob
  • Crumbling grout between the tiles
  • Shower grout that has worn away

If you live in an older home near Pitlochry Church of Scotland, older homes can move a little, which is hard on rigid grout and tired sealant.

What to look for in a quote

  • What happens if the job turns out different
  • Which sealant they’ll use, and why
  • What the quote includes, VAT included or not
  • Whether they seal over old material or remove it

10 questions to ask before you book

How to look after the new joints

How long the joints last depends on use and care. We suggest:

  • Open a window or run the fan to clear steam
  • Use a soft brush rather than a wire one
  • Rinse soap off the tiles after each shower
  • Have loose tiles looked at early

Give the new grout the time we tell you before using the shower, so it cures fully. From then on, a quick rinse after showering helps and keep the room ventilated.

Tiles can come away if failed grout is left. Once that happens, regrouting will not fix it so early action pays.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job